Ad free subscriber group to be implemented


Recommended Posts

We have finally decided to go ahead and implement an ad free group to the subscriber packages, it will be ready by the end of the week and current subscribers will have first dibs to "upgrade" to it, because that has to be done manually. Those who have an active subscription can choose to pay the ?20 for a year to be added to the current subscription, so in some cases a subscriber may have paid for 18 months if there's 6 months remaining on the ?10 package.

As mentioned above, it will cost ?20, which translates to $26 USD. This figure wasn't pulled out of my "behind")btw ;) We calculated that a typical Neowin reader (member and/or guest) account for about $36 USD a year per person (on average). So anyone who signs up will actually be getting a $10 waiver courtesy of Ne:Din. :D

We hope to target those members that purposely block ads and wish to give back in a constructive way, and for current subscribers who want to give a little more.

This group will also be eligible for freebies and draws throughout the year when we see fit, it could be a draw for a software license that has been donated to us by someone, free hosting or even a copy of Windows to be won by random selection.

We will also be adding member galleribothth subscriber packages, which will be enabled after moderator preview, although this addition won't be realised until sometime in April and must be considered an "extra" to the current subscription(s).

At the moment we don't have anything to replace the ads with, but feedback is welcome if it isn't too difficult to implement, this also means the IntelliTXT links will not appear for ad free accounts!

Before you comment, we have spent a long, long time considering this. It has been brought up by members and staff on more than a few occasions over the past 5 years or so, but we never really got around to it, or deciding on a "fair" price for both you and Neowin. That being said, I hope we have now introduced 2 tiers at a very reasonable asking price for the service we offer.

Question is, on a per user basis, which one genereates more income for the site? The ad free subscription or the current subscription package ( over time)? I personally don't like this idea, but if it helps neowin more in the long run so be it.

The $36 mentioned above is an average.. and accounts for people already using ad blockers, or an influx of guests that never return. So $26 is probably more realistic for an active member.

I also forgot to mention that it also goes without saying that ad free subscribers also get all the benefits of current subscribers.

When you say:

Both tiers also have their own private forum as well as the support forum that can be accessed by members

Does that mean each Tier will have its OWN private sub-forum (e.g. two separate for each tier) or a single private sub-forum that is accessible by both Tiers?

I can honestly say "it's about time".

Bit higher than i'd like, but if the Ads for an average user cost that much, it's fair - plus with the global financial crisis, well, gotta pay the bills somehow.

Congrats on doing this guys, very welcome step. I'm not jumping in yet, but i'll definately keep an eye on this one.

Small clarification if I may : we'll be able to enter freebies/draws. Are these subscriber exclusive? If so, to both tiers, or just L2?

Will this Tier 2 be seen as more "elite" than Tier 1?

I subscribe because I like Neowin and want to show my support - I've never used any of the features of it. I, however, have no issue with the ads. As such, am not sure whetehr to go to Tier 2 or not...

Thank you very much. I'm glad to see NeoWin is still as good as it was in the early days and listens to community suggestions.

Soon as I can sign up I will do so.

Is there going to be a tier two badge :p?
yeah, new badge for tier 2? lol

Yeah, I'm wondering the same.

I'm guessing the second tier subscriber group will be called Subscriber? ?:pp

Will this Tier 2 be seen as more "elite" than Tier 1?

I subscribe because I like Neowin and want to show my support - I've never used any of the features of it. I, however, have no issue with the ads. As such, am not sure whetehr to go to Tier 2 or not...

Same here. I don't find the ads intrusive at all. I don't use any subscriber features, apart from the larger inbox, which does have over 100 PMs in it.

kinda offtopic:

I remember when I first subscribed there was the option that subscribers would be able to edit thread titles to fix spelling errors, etc. What has happened to that and is that still available? What about a new forum skin for this group? I hope that wouldnt be way too much! Just wondering.

Edit: The only subscriber benefits i use are probably the flood control limit removal.

kinda offtopic:

I remember when I first subscribed there was the option that subscribers would be able to edit thread titles to fix spelling errors, etc. What has happened to that and is that still available? What about a new forum skin for this group? I hope that wouldnt be way too much! Just wondering.

You can edit the thread title: In the first post, click on Edit -> Full Edit.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • You literally have to do it on a desktop, which is incredibly annoying in our mobile-first world. What???
    • What part of "you can’t really depend on service providers to maintain features forever" is not clear enough?
    • Nope. That lack of surround sound capability (analog) won't fly with me. Sure, I use headphones most of the time, but still.
    • Creative Sound Blaster AE-X PCIe review: your headphones will love it by Steven Parker If you have been reading Neowin for any length of time, you may remember that I reviewed the Sound Blaster Audigy FX Pro back in April. I found it to be an excellent budget sound card, even though it lacked support for formats such as DTS over the included SPDIF port. Anyway, Creative reached out to me again asking if I was interested in reviewing the Sound Blaster AE-X. It is a card mainly targeted at headphone wearers, which I'll get into a bit later. Before we get underway, here is a disclaimer: Creative Labs provided a free sample without any review pre-approval. Here are the full specs of it: Creative Sound Blaster AE-X Dimensions: 179 x 126 x 18 mm Weight: 263g / 9.28 oz Platform: PCI-e DAC: ESS ES9039Q2M Connectivity Options Side: Rear: 1 x HD Audio Front Panel Connector, 1 x ⅛“ Headphone port, 1 x RCA Line-out (Left) port, 1 x RCA Line-out (Right) port, 1 x Coaxial SPDIF-out port, 1 x ⅛“ Mic in/Line-in port, 1 x TOSLINK SPDIF-in port Surround: No DNR / SNR: THD+N: 0.0001% Dynamic Range 130 dB Recording Resolution: PCM up to 32-bit / 192kHz (Stereo) Direct Mode: Line Out (Stereo): PCM up to 32-bit  384 kHz Coaxial SPDIF Out: PCM up to 24-bit 192.0 kHz Headphone Amp: PCM up to 32-bit / 384kHz (Stereo) Native DSD: DSD64, DSD128, DSD256 Output Impedance: 1Ω, Supported Headphone Impedance: 8–600Ω, IEM: 0.5Vrms, Low: 1.5Vrms, Mid: 3Vrms, High: 6Vrms, Maximum output power: 350mW @ 32Ω (High), Maximum output voltage: 6Vrms (High) Front Panel Headphone Amp: PCM up to 32-bit / 192kHz (Stereo) Native DSD: DSD64, DSD128 Output Impedance: 10Ω, Supported Headphone Impedance: 32–300Ω, Maximum output power: 40mW @ 32Ω, Maximum output voltage: 1.9Vrms ASIO: ASIO 2.3 Total Harmonic Distortion: THD+N: 0.0006% Dynamic Range: 114 dB Scout Mode: Yes EMI shielding: No (but it passed all the FCC emission tests) Operating temperature: 0–45°C Input Power: 12V⎓0.5A Warranty: 1 Year (MSRP) Price: $179.99 / £169.99 The Sound Blaster AE-X was announced at the end of May, and it becomes clear that it is mainly for headphone wearers. I should also note that the card does not support DDL/DTS encoding technology, but it is said to support decoding through the coaxial SPDIF port. I was able to test this working with the classic Windows Sound properties, but I could not get a DTS (decode) signal through my Logitech Z906, it defaulted to 3D sound whenever I played DTS content through Plex or Emby. In addition, this card only supports two channels (stereo) over the speakers. The surround support is limited to the Headphone Amp, so before I get underway, what we have here is a card mostly intended for headphone use, especially with its SPDIF In (Toslink) port where you could connect another device like a console. So what about the highlights of this card? The AE-X is powered by the ESS SABRE DAC (ES9039Q2M), which is capable of a 130 dB dynamic range. In addition, it supports 32-bit/384 kHz playback for deeper detail and clarity. The headphone amplifier delivers up to 350 mW @ 32Ω, which admittedly far surpasses standard onboard audio, offering support for studio-grade headphones. DSD256 and ASIO 2.3 are also supported. What doesn't it have? No support for What-U-Hear, Super X-Fi, or the SmartComms Kit No EMI shielding, but it passed all the FCC emission tests (from the FAQ) I also want to make it clear that I am no audiophile. For me, it's purely subjective and it should just "work" out of the box. First impressions As I said in the introduction, I was a bit sad to see that the AE-X only supports stereo output, meaning it would not be on par with my ALC1220 over my speakers, as I mentioned it seems like this card is marketed toward headphone users. Since I am not an avid gamer that would rule me out as a potential customer, but I can still test its capabilities! The card arrived in a nice-looking box, as shown above. It's quite a bit larger than the Audify FX Pro that I reviewed back in April, and at first I thought the covering meant that it was EMI shielded, but it isn't as mentioned above in the highlights section. What's in the box: 1 x Sound Blaster AE-X PCIe card 1 x 3.5 mm CTIA TRRS to Dual TRS Headset Splitter Cable 1 x Quick Start Guide Aside from the Quick Start Guide, which someone at my age (I guess) needs a magnifying glass to read thanks to the tiny fonts, Creative Labs also has the manual online, which first requires you to prove that you're human in order to access it (so I can't direct link it). Anyway, the box is mostly made up of cardboard, and the only plastic in it is the anti-static bag for the card itself. Design Top Bottom The card itself looks pretty cool and actually wouldn't look out of place in an all-white build. There's only one connector, and for some reason it is awkwardly placed on the side (front-facing) that is for the front panel audio connector, which will let you use the headphones through the front PC audio jack. Since the front panel Headphone Amp has fewer capabilities than the rear headphone port, I decided not to use it. Rear of card PCI-e interface The rear of the card is completely open and is normally where you would find the front panel connector. The PCIe interface side is completely covered, which initially made me think it was EMI shielded. I/O panel Side (front-facing) with Front panel connector On the outer rear bracket side we have the TOSLINK SPDIF in, Coaxial SPDIF out, RCA line out (Right), RCA line out (Left), Headphone out, and Mic/Line in ports. On the front facing portion of the card itself is the F-panel connector. Usage Test System Our test system consists of the following: AMD Ryzen 9 9950X3D Gigabyte X870E AORUS MASTER (BIOS F12) Corsair RM1000x (2024) Thermal Grizzly Kyronaut (33x33x0,2mm) 2x 32GB Kingston Fury Beast RGB DDR5 6000MT/s CL36-38-38-80 T-Force Z540 2TB (PCIe Gen5) NVIDIA GeForce RTX 5090 Founders Edition (NVIDIA) Creative Sound Blaster AE-X Windows 11 25H2 Pro I installed the card into the Gigabyte X870E AORUS MASTER which includes the RealTek ALC1220 onboard audio. For our subjective listening tests, I used the Coaxial SPDIF port to my Logitech Z906 speakers. For headphone tests I used the OneOdio Studio Max 2 Wireless DJ Headphones that I reviewed last month. After installing the audio driver, I installed Creative Nexus, which is a relatively new app designed for the latest Sound Blaster cards. Then I discovered the AE-X needed both a driver update from 1.00.15.0001 to 1.01.09.000 and a firmware update from 1.00.06.0000 to 1.00.06.0002, then I was set to go. It should be noted that the card did not work without the driver (not Plug and Play). As you can see above, you can manage the firmware, driver, and inputs via Advanced Settings on the Device tab. By default Nexus enabled "Direct Mode". Upon clicking on Acoustic Engine, the Equalizer can be enabled and set to four different presets, which are: Gaming Music Movies Footsteps Enhancer There's also a dedicated Scout Mode for gamers. I mainly used Tidal and Spotify in the past week to listen to some of my Liked Songs (which now total over 700) in Shuffle mode; there were no pops or interference that I could hear. I also found a 5.1 Surround Music playlist on Tidal that sounded really great over Studio Max 2 headphones. When I reviewed the Audigy FX Pro, I went out and purchased a Logitech Z906 set second-hand for €100 specifically to use with the card, but in this instance all I could get on the AE-X was the 3D output of surround sound through Coaxial SPDIF and although it still sounded great, it isn't quite as good as DTS Interactive via my onboard Realtek ALC1220. Conclusion So what have I learned? The AE-X lacks multi-channel support for 5.1/7.1 setups and drops support for modern surround technologies like Dolby or DTS, functioning strictly as a stereo output device. So to really benefit, you will need Studio-grade headphones to "hear" the benefits of this card. With that being said, I can imagine it will appeal to gamers who are switching between console and PC. By utilizing the SPDIF in port, you could just plug your headphones into the AE-X (front or rear port) and then switch between PC and Console without having to move the headphones to a different port. As I said in the Sound Blaster Audigy review, the EQ in the Creative Nexus app offers safe presets, which allows a user to further tweak the lows, mids, and highs for a personal listening experience. Of course it all depends on the headphones you hook up to it. Speaking of headphones, I kind of wish I had higher-quality Studio-grade headphones to really test this card with; I'm not usually wearing headphones in my day to day duties. The only time I will wear them is if I want to listen to music very late at night and I don't want to disturb my neighbors, so my rating (verdict) is based on this fact. Someone with a PC/Console setup and wears headphone religiously to game, and consume media will benefit much more than I from the high-quality Headphone Amps that are included in the AE-X. Once again, I do feel like Creative could have gone the extra mile to support the S/PDIF port a bit more. Why include it if you're not supporting the main popular digital formats? It seems like the decision was more of a legacy-based one, offering uncompressed 2-channel PCM audio, for users with high-fidelity audio systems and external DACs. Maybe I will be lucky enough to review a card that truly includes all these features in the future. I am sure readers with far more knowledge on audio systems than me will correct me in the comments below. I'll just say I am happy to learn what I don't know! Where to buy The Sound Blaster AE-X is available to purchase now in preorder for $179.99 on the U.S. Creative website, or for £169.99 on the Creative UK website and will start shipping to customers from June 25.
    • $80 or 90%, anything else would be financial suicide one way or another.
  • Recent Achievements

    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
    • One Year In
      hhgygy earned a badge
      One Year In
    • Week One Done
      AMV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!