Windows 7 Build 7100 RC (Changes/Bugs/Tweaks) Discussion


Recommended Posts

Do you guys use VLC player under 7100 , i didn't had the time to install it,but i will tomorow. I'm just curious, VLC has a nasty pixelized rendering after resize under 7077.I had this problem on builds before 7000.

When will they add .tga viewing support into windows photo viewer? Or even windows live photo gallery?

Does anyone know of or have a tga codec for WIC? It seems thats all thats needed to get windows photo viewer to view TGA's, but it doesn't seem like any exist through a quick google search.

Can you now save files to your desktop without windows bitching that you dont have permission?

Yes, that problem seems to be fixed for me.

Does anybody else get this when maximising Explorer windows? It only flashes up for a split second, and looks like a Vista leftover:

post-70638-1240776293.png

Yeah, I'm noticing that too. Kinda annoying now that it's pointed out :\

BTW: My wireless(Linksys WMP54GS) is still dropping but much less frequently.

Microsoft will be releasing that in a few days/weeks... soon ish

AHH cool, I was wondering. Been reading these articles about it, but can't find it anywhere.

Thanks for the heads up

Did anyone else notice that the EULA says the RC expires June 1st, 2010, yet winver says March 1st 2010? Running slmgr /dlv shows June 1st, 2010. Odd, no? Also, the rearm count has been reduced back to 3.

post-13144-1240780535_thumb.png

Anyone's WEI score change? My base score stayed 5.9, but my Memory score went from 5.9 up to 7.4 (it was 5.9 in both 7000 and 7048, it rose up to 7.4 in 7100), my Graphics score (for Aero) dropped from 6.9 to 6.7, but my gaming graphics stayed the same (6.9). My processor and HDD scores are the same as before, but my Memory and Aero Graphics scores both changed....one increased the other decreased.

I have been using 7 and enjoying it since it was available.

I just updated to the RC and am now having problems with DNS.

I have a Linksys N router connected to Cox cable modem. Wifi connections work fine. The problem is with the wired connection to the main computer. I can ping an IP but not a name. I actually got it to work by unchecking all the boxes in the network card's properties window, restarting, then rechecking the boxes. Everything else short of that did nothing.

Since my last restart, I am back to no internet connection and the above trick did not work this time.

I tried tracerrt and opendns. Again, I can ping an IP but not a name.

I am re-updating now. Not sure if a clean install would fix this.

It looks like there is a problem with DNS as far as I can tell. I reinstalled the network card and that also did not help.

Any ideas? I cannot find any answers elsewhere.

Thanks in advance!

Check the IP address of the wired connection.

For some rather weird reason, the *initial* connection winds up with a 169.254.*.* (private/unassigned) IP address, despite the network adapter (nForce 6 series) being supported. This is unique to 7; however, it's happened with every build so far. I have always reformatted between builds (installs have been clean and from Vista Ultimate x64; install is to a different drive from Vista, and via a VirtualCloneDrive mounted ISO).

A disable/re-enable on the wired adapter fixes the IP problem. (Linksys WRT54GS w/DD-WRT latest connected to Moto SB-5120).

Firefox creates a new profile when installed on a freshly installed OS and that profile name is different. The only thing I backup are the contents of the .default folder within the profile folder:

C:\Users\YourUserName\AppData\Local\Mozilla\Firefox\Profiles\5c2ck6gu.default. Take the contents of that and replace it with the ones in the new .default that firefox created.

This is how I backup Firefox as well and have had much success. You just have to make sure you copy and paste ONLY the contents of the old profile folder to the new profile folder, and not the folder itself, because the new profile folder has a different name (as explained above :-). I tried FEBE and was never able to get it to work successfully. This way works for me every time.

Damon

The only problem I have noticed with 7100 is that sometimes it takes a couple seconds for folders with large numbers of files to refresh their icons, the first time I access the folder after a reboot. This does not happen after resume from suspend or hibernate. I had this same issue in 7000 and 7057. In XP this was fixed by something related to the IconCache (I think) in the registry, but I don't see an entry for that in Win7. Actually I have also noticed this on occasion with the icons in the start menu "All Programs" folders. Anyway, not a big deal for me. Otherwise no problems. It runs pretty much the same IMHO as 7057 on my Futitsu S6510 laptop.

Damon

This is how I backup Firefox as well and have had much success. You just have to make sure you copy and paste ONLY the contents of the old profile folder to the new profile folder, and not the folder itself, because the new profile folder has a different name (as explained above :-). I tried FEBE and was never able to get it to work successfully. This way works for me every time.

I have never had this issue. I just install Firefox, delete the directory it created and copy back the "Mozilla" directory into roaming. Firefox picks it up straight away.

I lost :crazy: my key from when the beta started...does MS keep records of what email/person has what key?

The keys are all the same five 32-bit and five 64-bit keys. They used to be individual keys before the server used to issue keys crashed and burned due to traffic overload.

There are only like 10 keys total.. I am sure you can find one on a site somewhere. If not, just pm me I will give you one.

Oh cool, i didnt know it didnt really matter, ill snag one! Thanks! ALso im going from vista sp1 with all my stuff setup to RC...think ill be ok??

Oh cool, i didnt know it didnt really matter, ill snag one! Thanks! ALso im going from vista sp1 with all my stuff setup to RC...think ill be ok??

Well, I've done it three times, from Vista SP2 to builds 7057, 7068 and 7077 with success. Although the upgraded 7's Explorer would hang once in a while. Straight install, no problems whatsoever. In short, it'll work, but clean install is better.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • >Improved system sounds when using Windows in dark mode. The story being that bug would be an interesting one.
    • Edifier S3000MKII hi-fi audiophile grade bookshelf speaker is at its lowest price now by Sayan Sen Yesterday we covered a bunch of Dolby Atmos soundbar deals with several ones from Sony, as well as from JBL, Samsung, Polk Audio, and more. You can check them out in this dedicated piece. Those are not audiophile category speakers though as they are built with home theater use in mind. If you are searching for the former then Edifier has its S3000MKII at its lowest price at the moment (purchase link under the specs table down below). This is a two-way bookshelf monitor speaker designed to produce accurate sound. While it may not produce the best high-fidelity audio possible out there, it should still be significantly better than what you will get on soundbars of this price range. As such it will do justice to high-res audio played back through it. The only thing that may feel lacking is sub-bass as Edifier claims the unit can go down to 38 Hz, which should be enough for studio monitor purposes, but not for deep room-shaking rumbling bass. Where this does excel though is in its treble reproduction. With its super-tweeter, it claims to go as high as 40 kHz in the frequency spectrum, which should offer a sense of "air"yness. This is an active speaker which means it packs its own amplfication. It has a top-notch Class D amp that may be able to rival many Class AB designs too in terms of sound reproduction quality. The technical specs of the Edifier S3000MKII are given in the table below: Specification Value RMS Output Power 256W RMS (Treble: 8W × 2, Mid-Low: 120W × 2) Tweeter Driver 107mm × 107mm Planar Magnetic Tweeter Mid-Low Driver 6.5-inch (179mm) Long-Throw Aluminum Diaphragm Driver Frequency Response 38Hz – 40kHz Signal-to-Noise Ratio ≥ 85dB (A) Bluetooth Version Bluetooth 5.0 Bluetooth Codec Qualcomm® aptX™ HD Wireless Speaker Link Proprietary 5.8GHz wireless connection between speakers Supported Hi-Res Audio Hi-Res Audio Certified, up to 24-bit/192kHz Digital Processing XMOS XU216 Digital Signal Processor Audio Inputs Balanced XLR, Optical, Coaxial, USB Type-B, Line In, Bluetooth Input Sensitivity (USB) 400 ± 50mFFs Input Sensitivity (Optical) 400 ± 50mFFs Input Sensitivity (Coaxial) 400 ± 50mFFs Input Sensitivity (Bluetooth) 450 ± 50mFFs Input Sensitivity (Balanced XLR) 1000 ± 50mV Input Sensitivity (Line In) 600 ± 50mV ADC Capability Up to 24-bit/192kHz DSP Capability Up to 24-bit/192kHz DIX Capability Up to 24-bit/216kHz DAC Capability Up to 32-bit/384kHz XMOS Processing Power Up to 2,000 MIPS Edifier S3000MKII Audiophile Active (Powered) Wireless Speakers: $799.99 (Sold by Edifier US, Shipped by Amazon US) If you do not have the kind of budget to spend on the S3000MKII, you can also check out the Edifier R1280Ts which is right now on sale at just $114 (its lowest price in a very long time). Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • > The G 7 Pro supports wireless (XBOX Wireless, proprietary dongle, or Bluetooth) If anybody else's brain translates this to 'it works wirelessly on Xbox', according to the linked product page, it does not.
    • Ignoring the fact that this "colony" kicked the empire of King George's arse during those early years... You are confusing the First Industrial Revolution (which was clearly pulled out of some butt-hurt Brit historian's arse after the fact) with the Second Industrial Revolution (aka now called the Technological Revolution, undoubtedly by that same butt-hurt Brit), which transitioned the world from the UK/UPS Empire to the USA as the world's only superpower. https://en.wikipedia.org/wiki/Industrial_Revolution I hope you realize that I am having big fun here.
    • OpenAI announces GPT‑5.6 Sol, its next-generation flagship model beating Claude Mythos 5 by Pradeep Viswanathan Credit: OpenAI OpenAI today announced a limited preview of its new GPT-5.6 model series, which includes the Sol, Terra, and Luna models targeting different price points. GPT-5.6 Sol is the flagship model targeted at demanding reasoning and agentic workloads. GPT-5.6 Terra is positioned as a balanced model for everyday work, featuring performance competitive with GPT-5.5 while being half the cost. GPT-5.6 Luna is the fastest and most affordable model, delivering strong capability at a lower price point. Unlike previous model releases from OpenAI, GPT-5.6 is starting with a limited preview for a small group of trusted partners due to U.S. government restrictions. As expected, OpenAI previewed its plans and the models' capabilities to the U.S. government ahead of launch, and the government asked OpenAI to limit the first wave of access to select partners. OpenAI also mentioned in the official announcement blog post that it does not believe this type of government access process should become the long-term default. OpenAI highlighted that GPT-5.6 Sol comes with a robust safety stack featuring improved protections for higher-risk activity, sensitive cyber requests, and repeated misuse. The company also spent several weeks pressure-testing the system and hardening it against real-world attacks. On the capability side, as expected, GPT-5.6 Sol is OpenAI’s strongest model yet. It delivers better results in agentic performance across coding, biology, and cybersecurity. On the Terminal-Bench 2.1 benchmark, which tests command-line workflows requiring planning, iteration, and tool coordination, GPT-5.6 Sol sets a new record with a score of 91.9%, beating Anthropic's Claude Mythos 5. Additionally, GPT-5.6 introduces a new "max" reasoning effort for even deeper reasoning. The new "ultra" mode uses subagents to accelerate complex work beyond what a single agent can handle. Pricing starts at $5 per million input tokens and $30 per million output tokens for Sol. Terra costs $2.50 for input and $15 for output, while Luna costs $1 for input and $6 for output. GPT-5.6 comes with more predictable prompt caching, including support for explicit cache breakpoints and a 30-minute minimum cache life. Sol will also launch on Cerebras in July at speeds up to 750 tokens per second for select customers. OpenAI plans to make GPT-5.6 Sol, Terra, and Luna broadly available in ChatGPT, Codex, and the API in the coming weeks.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      154
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      67
  • Tell a friend

    Love Neowin? Tell a friend!