Neowin Digital Gallery


Recommended Posts

I love the baby giraffe! :) Pretty darn cute. Was that at the zoo?

As others have pointed out, it is not actually a giraffe. I'm pretty sure it's some kind of deer and it was resting in my school campus (I study in a university called Tecnol?gico de Monterrey [aka ITESM] in Monterrey, M?xico).

Now, on to more photos:

This is inside one of the Microsoft buildings in Redmond, WA, click for more info.

4008884455_0d17fdbf2e.jpg

These 2 are on a major Avenue that passes outside my school (also click for more info):

4011932040_2ca9779f76.jpg

4012314225_5ef87725cc.jpg

Adding some more:

<snip>

BTW, Does anyone know any good settings to convert to B&W, I found Lightroom's presets to give pretty poor results and moved some stuff but I'm still not 100% satisfied.

http://www.niksoftware.com/silverefexpro/en/entry.php

Try it, you might like it. It works from within Lightroom as well, as an external editor.

I went back and had a look at some older photos I took, thought I could bring them to life with a little Photoshop'ing.

I thought I would try to replicate a Holga/Lomo kind of look with this one.

I have never shot Holga/Lomo, so I don't know,... first hand, when they actually look like :)

I guess it looks... interesting, at least... :)

4020174127_d4d5898126.jpg

Was up in Fort William for a couple of days this week. Took a number of snaps.

These ones are taken at Glen Nevis range (Steall Falls to be exact). The sun was being a little bitch hiding behind the mountain and causing a shadow akin to a global terminator so I whipped out the camera for some bracketed exposures and combined the images into HDRs.

4020960410_11bc90472c.jpg

4020963564_db718e673d.jpg

4020967490_37f7531df9.jpg

pity about the blending of the sky in this one - still looks not bad though.

I think they look quite cool - I'm think getting a little better at this tone mapping stuff - HDR tips/comments welcome as ever.

I have loads more images from the couple of days I was up there 19 of which I have processed for "arty-ness" to be posted to flickr but am goni bleed them on instead of my usual punting them all on at the same time. Put to many up and only the front page ones get looked at - know what I mean.

Cheers

Malc

Was up in Fort William for a couple of days this week. Took a number of snaps.

These ones are taken at Glen Nevis range (Steall Falls to be exact). The sun was being a little bitch hiding behind the mountain and causing a shadow akin to a global terminator so I whipped out the camera for some bracketed exposures and combined the images into HDRs.

<Images snipped>

pity about the blending of the sky in this one - still looks not bad though.

I think they look quite cool - I'm think getting a little better at this tone mapping stuff - HDR tips/comments welcome as ever.

I have loads more images from the couple of days I was up there 19 of which I have processed for "arty-ness" to be posted to flickr but am goni bleed them on instead of my usual punting them all on at the same time. Put to many up and only the front page ones get looked at - know what I mean.

Cheers

Malc

For the most part I like them, but the HDR halos around the mountains is too much. It kind of overpowers the images.

For the most part I like them, but the HDR halos around the mountains is too much. It kind of overpowers the images.

I think that's because I did these hand held so I was adjusting exposure quickly a couple of stops here a couple of stops there without really following the normal HDR capture process so that I could keep a reasonable position to allow the images to be merged.

I'm on the D40 and it doesn't have auto bracketing you see...

There may be a method for cleaning out those "halos" but I'm not that familiar with photomatix yet to do so.

It's photomatix. It generally produces quite unnatural tonemapped images with halo-artefacts. The only way to properly compress the dynamic range of a photograph is to use bracketed exposures, and do it yourself by hand in ACR/Photoshop with layers and blending. Which is slow :(

It's photomatix. It generally produces quite unnatural tonemapped images with halo-artefacts. The only way to properly compress the dynamic range of a photograph is to use bracketed exposures, and do it yourself by hand in ACR/Photoshop with layers and blending. Which is slow :(

Yep, and unless there is money in it I can't see me doing that lol. Still I reckon a GradND filter might have done the trick whilst shooting to get even tones from sky to ground - just wish I could justify forking out the cash for one!

More Fort William updates from me. No HDR this time but I have been playing about with lightroom processing. I have access now to Colo(u)r Efex pro and Topaz but keep forgetting to use it. Maybe next time.

anyways:

4023106801_e91faaf888_b.jpg

4023109823_447511f9be_b.jpg

4023115001_09e4fa5353_b.jpg

4023878174_270bf72e3e_b.jpg

4023124223_81d0de9a6f.jpg

4023886954_6d6f470471_b.jpg

Think I also did pretty well with the titles of some of these - not my best work (titles wise I mean) but getting back to form lol.

Malc

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!