Recommended Posts

Wandering around happened upon some drowners basically at the start of the game...

Game: Tip:  You can flee battle by....

Me:  lol flee, witchers don't flee fool!

Me:  dead >.<

 

Game is good ole witcher fun, graphics are good but as LaP said, not really better than any other game.  I don't rate them much higher than DAI for example. 

 

Also runs surprisingly well on a 280x @ 3440x1440 on high settings with texture and detail to Ultra.

Sorry, but this was absolute deception, no way to spin this. 2013 screenshot (and this was from gameplay footage)t:

 

the-witcher-3-downgrade-143136316157.png

 

Retail screenshot:

jpg

 

Such a removal of atmosphere, the day one patch even removes quite a bit of filtering on consoles because they still couldn't run the game at stable 30fps framerates looking only slightly better than The Witcher 2 did (which had a good port to Xbox 360).

Now if the options to make it look like the 2013 build were still in the game (doesn't matter if it requires massive power), nobody would have cried foul, but they aren't, that's why people are mad, people want things to keep moving forward, not stagnate to the lowest common denominator just because it sells well on hype alone.

Let's see if someone finds some of the options and hacks them like they did with Watch Dogs. Otherwise I have no doubt it will return in an enhanced edition only for PC.

Default control is not very good on pc. I might play it with a controller.

Tried that during my playthrough, when I wanted to raise my feet and just relax with a gamepad. It was horrible.

Controls with mouse and keyboard were much more accurate for me. Especially during looting and not only combat.

Tried that during my playthrough, when I wanted to raise my feet and just relax with a gamepad. It was horrible.

Controls with mouse and keyboard were much more accurate for me. Especially during looting and not only combat.

 

really?  i am a huge fan of kayboard and mouse, but it has being really weird in witcher 3.     switched to xbox one gamepad, and played for 10 minutes, felt much better.

 

i will see how it goes in major combat, but overall it felt more precise.

Plays fine on KB&M to me but then again I disliked DAI with the controller and preferred it with KB&M despite popular opinion.

 

i take that back. after some combat, i realized controller does not help.   swimming is terrible. 

 

back to kb&m here for combat and using controller for general wondering.   it is nice that you can switch seamlessly and use both at the same time :)

i finished da:i with kb&m too, even though i bought the controller after first few hours playing just to improve my gaming experience.   kb&m players are hard converts.

 

i use my controller in platformers mostly.    in 1st/3rd person games it is not as great.      had to tweak the mouse sensitivity a lot before i got it to where it feel natural.

 

 

overall, it seems a great game, i see how reviews rate it so high.  you really have all that you possibly want from RPG.

have to play it much longer to see if i like it better then da:i but it is looking out to be that way so far.

really?  i am a huge fan of kayboard and mouse, but it has being really weird in witcher 3.     switched to xbox one gamepad, and played for 10 minutes, felt much better.

 

i will see how it goes in major combat, but overall it felt more precise.

 

It's not really the kb/m control that is weird. It's the default keys binding that kind of **** imo. I did my own keys binding and it works well now.

i played an hour or so this morning and i just dont get people comments about the graphics.  I played the witcher 2 as well on max settings and in my opinion the only thing that i cant say that the withcher 3 kills it is the trees and grass.

 

Was designed for a controller this time around for sure but that works for me as i prefer a controller.

Anyone knows how the DLC installation works on galaxy? When i click on them it downloads 27MB but then nothing happen i have no feedback and i don't know if they are installed or not. They really need to work on that game extras page and add feedback to know what is installed or not.

 

Also anyone knows what the bonus pack is?

i played an hour or so this morning and i just dont get people comments about the graphics.

Was designed for a controller this time around for sure but that works for me as i prefer a controller.

 

Well CDPR kind of marketed the game as a "next gen game" that would push PC to its limit and require an upgrade to play on ultra.

 

To be honest i can put most of the settings on ultra and it still run fine enough at 1080 for an offline rpg even when fighting multiple mobs. I have an overclocked core i5 750 with 8GB of ram and a single 970. Not really an high end pc ...

 

It looks good but unless they make en enhanced edition it wont age very well. I just wish the game would support better AA. I would gladly turn some settings down to high to get less aliasing.

  • Like 1

Anyone knows how the DLC installation works on galaxy? When i click on them it downloads 27MB but then nothing happen i have no feedback and i don't know if they are installed or not. They really need to work on that game extras page and add feedback to know what is installed or not.

 

Also anyone knows what the bonus pack is?

i got two dlcs on GOG Galaxy -

temerian armour set = 25mb

beard and hairstyle set for gerald = 19mb

 

 

clicking on them downloads them somewhere.. where i cannot find them, and i have no indications that they were ever installed.

 

 

some kind of bug maybe?

No Cursing or Swear Words
We encourage you to use our communities as a forum to debate topics, but please use proper adjectives to express yourself. We do not tolerate circumvention of our word filter or abuse upon another member. As stated above, we are a forum for all ages and expect posts to be family / work friendly.

Edited by Andrew

Well CDPR kind of marketed the game as a "next gen game" that would push PC to its limit and require an upgrade to play on ultra @4k

 

To be honest i can put most of the settings on ultra and it still run fine enough at 1080 for an offline rpg even when fighting multiple mobs. I have an overclocked core i5 750 with 8GB of ram and a single 970. Not really an high end pc ...

 

It looks good but unless they make en enhanced edition it wont age very well. I just wish the game would support better AA. I would gladly turn some settings down to high to get less aliasing.

 

Fixed that for you.

Sure if you're playing on PC hardware and you're just playing at 1080 it doesn't take a super system to ramp up the specs.

You're totally right that the game isn't going to age very well if your criteria is how good it looks at 1080.

They designed the game to encourage PC gamers to push up the resolution, eventually to 4k.

So in a few years maybe they'll be single card reasonably priced GPUs that can play the game at 4k and it will look better for them then 1080 Ultra does now on existing hardware.

Also your GeForce 970 is a second gen Maxwell GPU so it's the current top of the line architecture even if it isn't the top sku.  That part at least IS considered "high end".

Fixed that for you.

Sure if you're playing on PC hardware and you're just playing at 1080 it doesn't take a super system to ramp up the specs.

You're totally right that the game isn't going to age very well if your criteria is how good it looks at 1080.

They designed the game to encourage PC gamers to push up the resolution, eventually to 4k.

So in a few years maybe they'll be single card reasonably priced GPUs that can play the game at 4k and it will look better for them then 1080 Ultra does now on existing hardware.

Also your GeForce 970 is a second gen Maxwell GPU so it's the current top of the line architecture even if it isn't the top sku.  That part at least IS considered "high end".

Perhaps but not with current video cards. A GeForce GTX 980 can't run the game at 1080p/60 on Ultra. For that, you'll need a GeForce Titan X. Also, it appears to favour AMD cards which isn't too surprising. Next-gen consoles use AMD GPUs with the same architecture as the HD 7K and R9 200 series cards.

 

It'll be awhile before 4K gaming is possible at 60 FPS with single-GPU video cards. At least with The Witcher 3, considering how demanding it is on Ultra.

it appears to favour AMD cards which isn't too surprising. Next-gen consoles use AMD GPUs with the same architecture as the HD 7K and R9 200 series cards.

That's actually a bit surprising given that it's an nVidia GameWorks enhanced game.

http://wccftech.com/nvidia-responds-witcher-3-gameworks-controversy/

It'll be awhile before 4K gaming is possible at 60 FPS with single-GPU video cards. At least with The Witcher 3, considering how demanding it is on Ultra.

It depends on what you mean by awhile I guess. He was talking about how it was going to age though so my comments weren't directed to existing hardware. GPU's manufacturing has stagnated for the last few years at the 28nm process because fabs had issues with 20nm designs of high power chips (20nm low power mobile chips are fine).

So GPUs appear to be about to make a major jump from 28nm to 14nm/16nm FinFet designs as well as 3D memory. When that backlog finally breaks (likely later this year or next) there is likely to be a large jump in performance. Combine that with DX12 improvements and I'd bet higher end single card (non-Titan... something like a GeForce 1080 maybe) will be able to do 4k@30 consistently next year.

Maybe a year or two later for 60fps. Mid range cards in the sub 28nm/3D memory generation will (again later this year or next) will likely have little trouble with 1080@60fps.

That's actually a bit surprising given that it's an nVidia GameWorks enhanced game.

http://wccftech.com/nvidia-responds-witcher-3-gameworks-controversy/

 

It's easy to assume that but when you take a look at benchmarks, it paints a different picture. The GameWorks features are just that, features. They're going to run better on NVIDIA hardware because that's what it's designed for but improving performance isn't the goal. AMD has a slight advantage now because of the next-gen consoles. Games like Ryse: Son of Rome and Far Cry 4 perform better on AMD hardware (despite the latter featuring GameWorks effects).

 

It depends on what you mean by awhile I guess. He was talking about how it was going to age though so my comments weren't directed to existing hardware. GPU's manufacturing has stagnated for the last few years at the 28nm process because fabs had issues with 20nm designs of high power chips (20nm low power mobile chips are fine).

So GPUs appear to be about to make a major jump from 28nm to 14nm/16nm FinFet designs as well as 3D memory. When that backlog finally breaks (likely later this year or next) there is likely to be a large jump in performance. Combine that with DX12 improvements and I'd bet higher end single card (non-Titan... something like a GeForce 1080 maybe) will be able to do 4k@30 consistently next year.

Maybe a year or two later for 60fps. Mid range cards in the sub 28nm/3D memory generation will (again later this year or next) will likely have little trouble with 1080@60fps.

4K/30 is doable now with current high-end cards (e.g. GTX 970, R9 290X). 4K/60, on the other hand, requires dual-GPU configurations. It'll be interesting to see how DirectX 12 benefits end users. As for aging, that's covered by ubersampling. It's intended to not run well on current hardware and it serves as a bit of future-proofing in terms of image quality.

 

I forgot about 14nm/16nm GPUs. I guess we'll have to wait and see. I said it'd be awhile because AMD still hasn't released their new video cards yet and we don't know what NVIDIA will bring out aside from the GTX 980 Ti. I'm currently running 2x R9 280Xs in CrossFire and I plan on running those until AMD and NVIDIA release their next next-gen cards.

This topic is now closed to further replies.
  • Posts

    • Microsoft's Copilot Cowork now generally available with usage-based billing by Pradeep Viswanathan Back in March, Microsoft first revealed Copilot Cowork, a new agentic AI experience in Microsoft 365 Copilot through which users can assign tasks to AI to complete in the background. After testing the service with a limited set of customers in Research Preview for a few weeks, Microsoft announced the general availability of Copilot Cowork to customers in the Frontier program on March 30. Today, Microsoft announced the general availability of Copilot Cowork worldwide for Microsoft 365 Copilot customers. The company also highlighted that Cowork became the fastest-growing feature in the history of its Frontier program. Unlike regular Copilot Chat, Copilot Cowork can run complex, long-running, multi-tool tasks from start to finish in the cloud by using organizational context through Work IQ. When compared to Claude Cowork, Microsoft claims that Copilot Cowork will be 30% to 40% cheaper on average with its Microsoft 365 connector. For now, Copilot Cowork runs on Anthropic models, including Opus 4.8 and Sonnet 4.6. However, Frontier customers can now use GPT-5.5. Microsoft also announced Cowork 1, a secure fine-tuned model coming in the next few weeks, which is designed to handle everyday Copilot tasks at a lower cost. To access Copilot Cowork, a Microsoft 365 Copilot user subscription is required. Usage is billed separately through Copilot Credits, based on model use, context retrieval, tool calls, and runtime. Pay-as-you-go pricing is set at $0.01 per Copilot Credit. To offer IT teams full control over usage costs, Microsoft provides spending limits, usage alerts, user-level controls, reporting, and prepaid usage plans for organizations. Usage-based billing begins today. However, Frontier customers who used Cowork between March 30 and June 16 will not be billed until July 1, 2026. The Microsoft 365 Copilot app now includes a toggle to enter the full Cowork experience. Microsoft is also adding partner plugins, with Enosix, Harvey, LSEG, Miro, monday.com, Moody’s, Morningstar, S&P Global Energy, and TeamsMaestro available now. Adobe, Atlassian, Box, Canva, Databricks, and others are coming soon.
    • With Nova enabled I am not seeing a difference with compactmode.show?
    • HOLY THREAD REVIVAL   But yes, look for browser.nova.enabled and set it to true
    • 5-year subscription to AdGuard VPN price-dropped now 90% off by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where you can save 88% off a 5-year subscription to AdGuard VPN. In the digital age where internet privacy is paramount, AdGuard VPN emerges as an essential tool. This virtual private network (VPN) is your encrypted gateway to the internet, helping your data stay secure and your online activities remain private, regardless of your location. More than just a privacy tool, AdGuard VPN is a robust solution packed with features that cater to a variety of internet needs. Why AdGuard VPN subscription deal over other VPNs: Exhaustive List of Locations: With 60+ locations available worldwide, you have the freedom to connect from anywhere you want, effectively bypassing geographically restricted content. Check complete list of servers here. Advanced Security Protocol: AdGuard VPN uses its own security protocol, guaranteeing a faster and safer VPN connection. This means you can browse, stream, and download with peace of mind knowing your data is secure. Zero-Logging Policy: Rest assured, your personal data is not collected and your internet traffic stays private at all times, thanks to AdGuard's strict zero-logging policy. Simultaneous Connections: Connect up to 10 devices simultaneously, providing protection for all your devices under just one account. Trusted Developer: AdGuard is a renowned name in the world of computer security, bringing their expertise and commitment to privacy and security to their VPN service. What You Get: Up to 10 devices connected simultaneously All locations Light-speed servers Unlimited data No logs policy Trusted developer Available on all platforms Privacy Created by a team from Russia, AdGuard software Limited is headquartered in Limassol, Cyprus. While the country does follow European privacy laws, it's not part of the 5/9/14 Eyes Alliance. Adguard may not properly work in China. Good to know Length of access: 5 years This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Device per license: 10 Access options: desktop & mobile Updates included 5- years of AdGuard VPN normally costs $359.40 without discounts, but it can be yours just $39.97, that's a saving of $324.43 (90%) off. For full terms, specifications, and license info please click the link below. Get this 5-year AdGuard VPN deal for just $34.97 (was $359.40) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • KillerPDF 1.5.1 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~10 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.5.1 changelog: Performance Save Flattened PDF now uses multiple CPU cores. Page rasterization is parallelized (PNG encoding runs across cores; the PDFium render step stays serialized since the library isn't thread-safe), so large documents flatten significantly faster while the UI stays responsive (#68). Fixed PDFs that failed to open with "Unexpected EOF" now open (#72). The failure was PdfSharpCore's Flate inflater (SharpZipLib) rejecting the FlateDecode cross-reference stream on multi-revision PDFs - files that open fine in browsers, Acrobat, and Foxit. KillerPDF now detects this and re-opens the file losslessly through PDFium, preserving selectable text. Thanks to @javajon for the report and a detailed reproduction. Grid view renders every page. It was capped at the first 26 pages, so longer documents stopped loading partway through. Tiles also stream in progressively now instead of blocking until the whole document is rendered. Grid Ctrl+Scroll no longer reloads every page when the zoom is already at its limit and nothing would change. Removed a stray horizontal scrollbar (a thin green line) that could appear across the bottom of grid view. Files on UNC / network shares (including the WSL \\wsl$ filesystem) are copied locally before opening, avoiding partial-read failures on network filesystems. Changed Minimum zoom lowered from 10% to 5%, so grid view can pack more columns (helpful for wide/landscape pages) and single-page view can zoom out further. Download: KillerPDF 1.5.1 | 6.3 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      Console General earned a badge
      One Year In
    • One Year In
      Twozo Technologies earned a badge
      One Year In
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • Veteran
      branfont went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      111
    4. 4
      Steven P.
      89
    5. 5
      Nick H.
      71
  • Tell a friend

    Love Neowin? Tell a friend!