Recommended Posts

I run Windows 10 as my main OS. The only real problems I have had is IE11 locking up on some games that use flash. I'm a gamer and use Steam for my gaming and haven't had problems with playing. I haven't figured out how not to logon after the computer has been sleeping. Overall it's been a pretty good running OS. 

 

I don't have to login after it wakes up.  I have the 32 bit version on this desktop and the 64 bit version on my laptop.  I also ran the previews of both 7 and 8 with nothing more than just annoying problems here and there while they worked on it.

 

I found the setting.  Go to All Settings and then System and then Sleep and then advanced power options.  There is a require password on wakeup and set it to No.  While you're there check out the other settings.  Mine were imported from my previous version installations.

I don't have to login after it wakes up.  I have the 32 bit version on this desktop and the 64 bit version on my laptop.  I also ran the previews of both 7 and 8 with nothing more than just annoying problems here and there while they worked on it.

 

I found the setting.  Go to All Settings and then System and then Sleep and then advanced power options.  There is a require password on wakeup and set it to No.  While you're there check out the other settings.  Mine were imported from my previous version installations.

Windows 10 became my daily driver with 9841, and my main OS with 10074.  However, the issue remains individual-driven for all too many obvious reasons - some folks will never be comfortable with an OS that caters AT ALL to anything other than keyboards and pointing devices on their computers that support neither one, while others (such as moi) find that sort of thing irrelevant, even though I DON'T have touch support on any of my hardware.

 

The only hardware that HASN'T been upgraded to 10130 yet is the oldest notebook (and that is due to too many DPC_WATCHDOG_VIOLATION issues booting 10122); worse, there are too many possible CAUSES to rule anything out.  (It has an odd amount of RAM, CPU and GPU from different companies, and a wireless Ethernet chipset with known quirks.

 

THe only issue on my desktop WILL become irrelevant going forward due to an upcoming HARDWARE change, which is why I haven't discussed it - Oracle Virtual Box will not install in any build later than 10000.  (The why it will become irrelevant should be obvious, the motherboard and CPU will be replaced by a Z97/G3258 tag-team - which support Hyper-V; Hyper-V is already supported by the newer of the two notebooks.)

 

The only hardware that HASN'T been upgraded to 10130 yet is the oldest notebook (and that is due to too many DPC_WATCHDOG_VIOLATION issues booting 10122); worse, there are too many possible CAUSES to rule anything out.  (It has an odd amount of RAM, CPU and GPU from different companies, and a wireless Ethernet chipset with known quirks.

 

 

PG, this is the thing that I am wondering about. Not to the extent your computer is, but there are so many people out there that are using systems with different drivers, and such, I am a little bit concerned that your average user is going to have "odd ball" kind of errors when they install Windows 10.

 

This isn't a problem with the OS at all but I've learned that the OS is often blamed when it's not really the OS that's the problem.

 

With respect to the "free upgrade offer", I have not heard whether they are going to stagger the upgrade process or if they are just going to let people upgrade "from the getgo". 

PG, this is the thing that I am wondering about. Not to the extent your computer is, but there are so many people out there that are using systems with different drivers, and such, I am a little bit concerned that your average user is going to have "odd ball" kind of errors when they install Windows 10.

 

This isn't a problem with the OS at all but I've learned that the OS is often blamed when it's not really the OS that's the problem.

 

With respect to the "free upgrade offer", I have not heard whether they are going to stagger the upgrade process or if they are just going to let people upgrade "from the getgo". 

tompkin - that's been the case since 9x, and it's the sort of thing that gives field technicians heartburn.  (The notebook in question has an AMD CPU, old NVidia notebook GPU, and an Atheros Qualcomm wireless Ethernet chipset - any of which - alone or in combination - can cause DPC_WATCHDOG_VIOLATION BSODs - going back to XP.  The notebook in question shipped with Vista - and upgraded from 8.1.)  Such a thing is not predictable, either.

tompkin - that's been the case since 9x, and it's the sort of thing that gives field technicians heartburn.  (The notebook in question has an AMD CPU, old NVidia notebook GPU, and an Atheros Qualcomm wireless Ethernet chipset - any of which - alone or in combination - can cause DPC_WATCHDOG_VIOLATION BSODs - going back to XP.  The notebook in question shipped with Vista - and upgraded from 8.1.)  Such a thing is not predictable, either

I may be an old hack but I don't think MS should put Windows 10 out before it's ready. By that I mean stable, even if not "feature complete".

 

I know they say they will have continuous updates but they better get them fixed dang quick because even a few users (percentage-wise) having problems could get on Twitter with their 'Tweeting and Re-Tweeting' to make it sound like there are major problems. Just sayin'.

****

PGHammer: I still have Windows 95 Beta CD's in my closet from when I was in MSDN. I had above-average "standard" hardware. I remember that I was amazed at how good it was. I don't remember exactly how long I got it before RTM but there was a significant amount of time. I ran NT as my main machine at the time but I did use Windows 95 so that I would know the UI and I recall how remarkably stable it was.

 

EDIT:

 

BTW, PGHammer, I posted in another thread that I got a notification that Windows 10 will run on my machine but my video card doesn't have a driver. Whenever it downloads after it is released I will just have to wait until there is a driver released. 

I may be an old hack but I don't think MS should put Windows 10 out before it's ready. By that I mean stable, even if not "feature complete".

 

I know they say they will have continuous updates but they better get them fixed dang quick because even a few users (percentage-wise) having problems could get on Twitter with their 'Tweeting and Re-Tweeting' to make it sound like there are major problems. Just sayin'.

****

PGHammer: I still have Windows 95 Beta CD's in my closet from when I was in MSDN. I had above-average "standard" hardware. I remember that I was amazed at how good it was. I don't remember exactly how long I got it before RTM but there was a significant amount of time. I ran NT as my main machine at the time but I did use Windows 95 so that I would know the UI and I recall how remarkably stable it was. 

However, I don't judge all hardware by issues with one - it's why I have TWO notebooks in the test pool.  The other notebook - a newer HP notebook - has a more heterogenous parts selection - and has been, in fact, flawless.  (That is why I posited the issue as individual - right down to the hardware in question.)  I was in the Windows 95 beta as well - we went through SIX release candidate builds before we had the RTM build (still the most of any Microsoft OS); that is why I call this portion of testing the "home stretch" - but not the finish line.

  • 2 weeks later...

I've had win10 as a main OS in its early builds, but then went back to win 8.1 and installed win10 in vm. I have this urge to install win10 as a main os again, would it be rational at this point? :p

10130 is dang near totally stable on my main system.  Not any issues to speak of, other than an appcrash or two per week.

only issue I have had is few games crash from fullscreen back to desktop, not all games but a few. Majority of my top ones don't. The notification section is pretty buggy i.e. click to eject usb sometimes comes up, sometimes is hidden, sometimes it doesn't at all. and ejecting usb sometimes, always says it's busy when it's not. that's about all apart from this it's snappy fast and majority works.

 

Also one which hasn't really left is the error box on restarting, shutting down. Doesn't stop me but it always comes up and I have to click ok to get rid of it before it proceeds. I have heard this is a common issue for the Win 10 builds as I've used them all the way from early days.

Afraid not yet, oddly enough the last 2 builds have been the least stable for me (not complaining, I understand it's still in a test phase) but up till 10074 it was fairly stable for me the last few have been kinda buggy with crashes (just reinstalled it on one computer last night and got some odd issue during the install that I didn't with the older builds on the same computer)

  • 2 weeks later...

However, I don't judge all hardware by issues with one - it's why I have TWO notebooks in the test pool.  The other notebook - a newer HP notebook - has a more heterogenous parts selection - and has been, in fact, flawless.  (That is why I posited the issue as individual - right down to the hardware in question.)  I was in the Windows 95 beta as well - we went through SIX release candidate builds before we had the RTM build (still the most of any Microsoft OS); that is why I call this portion of testing the "home stretch" - but not the finish line.

Followup - I clean-installed 10147 on the oldest notebook (Big Pavilion) - the BSODs have been banished.  Baby Pavilion is the only hardware still on 10130 - however, it is also the only hardware that had no issues at all with 10130.  Still, all hardware is now ready for the next build.

10147 is definitely good enough to run as main OS. At this point though, I wouldn't recommend doing it as you will have to have a licensed version of 7/8 installed in order to get the 10 upgrade.

10147 is definitely good enough to run as main OS. At this point though, I wouldn't recommend doing it as you will have to have a licensed version of 7/8 installed in order to get the 10 upgrade.

 

Indeed. At this time, why not just wait until it is released.

  • Like 2

Bear in mind that insider builds collect a lot of data - including keystrokes. If you're happy with that on your main computer then fine, but if you're using your machine for work purposes then it's probably not appropriate.

This topic is now closed to further replies.
  • Posts

    • Micron reveals AI companies are spending billions to lock up its memory years in advance by Karthik Mudaliar The demand for more memory is far from over, and Micron is turning the AI-driven memory shortage into a much more predictable business. The company has revealed that it has signed 16 strategic supply agreements backed by roughly $22 billion in customer deposits and other financial commitments. The contracts cover DRAM and NAND deliveries over several years, with some running through 2030. With the AI boom, demand for high-bandwidth memory (HBM) has grown so quickly that large customers are now prepared to help finance future production in exchange for a guaranteed supply. According to Micron’s latest financial results, the company received commitments worth about $22 billion across its new agreements. Around $18 billion is expected to arrive as cash deposits, while the rest will come through other financial arrangements. Micron says the agreements could generate approximately $100 billion in future contracted obligations. They cover around 20% of its expected DRAM shipments and one-third of its NAND shipments during their respective terms. It should be noted that although AI infrastructure is the main force behind the current shortage, not all 16 agreements with Micron involve AI companies. Micron said the customers also include consumer electronics and automotive businesses, two sectors that increasingly compete with data centers for the same manufacturing capacity. HBM is consuming an increasing share of that supply. Unlike conventional desktop or server RAM, HBM stacks multiple memory dies vertically and places them close to an AI accelerator. This gives GPUs and other AI chips access to data at much higher speeds, but it also requires more complicated manufacturing and packaging. Micron says its 12-layer HBM4 memory is now shipping in high volume for a lead customer, with samples also supplied to other companies. The chipmaker has already generated more than $1 billion in HBM4 revenue and says the product is ramping twice as quickly as its earlier HBM3E generation. Samsung has similarly warned that the memory shortage could continue into 2027 and beyond. Consumer memory companies have also had to address sharp increases in DDR5 pricing, suggesting the effects are already reaching beyond the data center. For consumers, that could mean the AI memory crunch lasts longer than expected, even as manufacturers invest heavily in new production.
    • XnConvert 1.112 by Razvan Serea  XnConvert is a cross-platform batch image-converter and resizer with a powerful and ease of use experience. All common picture and graphics formats are supported (i.e. JPG, PNG, TIFF, GIF, Camera RAW, JPEG2000, WebP, OpenEXR) as well as supporting over 500 other image formats. Also available within the batch operations include rotating, adding of watermarks, adding of text along with many image-adjustment features such as brightness, shadows and more. Among the features included are: Batch adding of files and folders Support for drag and drop of files Batch rotating, cropping, resizing and more Adding of photo masks Preserving or removing image metadata in conversions Multipage image file support (i.e animated GIF, APNG, TIFF) Command line integration via NConvert Filters - such as 'Blur', 'Gaussian Blur', 'Emboss', "Sharpen' and much more Effects - such as 'Old camera' and much more Download: XnConvert 64-bit | Standalone | ~30.0 MB (Freeware) Download: XnConvert 32-bit | Standalone Links: XnConvert Website | Screenshot | Release Announcement Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft updates Visual Studio Code with chat cost tracking and multi-agent chats by Paul Hill Microsoft has just launched Visual Studio Code 1.126, its latest weekly release. This time, the company has focused on letting you see the total cost of chat sessions to spot expensive conversations; enabling multiple chats per session that run side-by-side in one agent host Copilot session; and letting you browse new folders safely in restricted mode. We have now reached the stage where free AI in IDEs is coming to an end. To help you keep track of your costs, VS Code now lets you see the entire cost of a chat session, rather than just individual turns. This should give you more transparency about which sessions consume the most credits, so you can better manage your usage over time and spend less. For those of you using the Agents window, you know it is possible to run and manage multiple agent sessions at once. In this update, a Copilot session started from an agent host can hold several chats at once. Explaining how this feature works, Microsoft writes: Finally, from this update forward, Microsoft will remove the pop-up when opening an untrusted folder. When you open a new folder now, it will automatically open in Restricted Mode. You will see a banner that lets you manage the trust level of the folder. Microsoft has made this change so that it’s easier to start inspecting code without giving it trust right away. If you have VS Code, you can check for updates within the app now to get this new version. Otherwise, you can download it from the Visual Studio Code website.
    • Anthropic accuses Alibaba of using 25,000 fake accounts to copy Claude's capabilities by Karthik Mudaliar Anthropic has accused Alibaba of using nearly 25,000 fraudulent accounts to extract capabilities from Claude on a huge scale. According to a report from Reuters, Anthropic told US lawmakers that operators linked to Alibaba and the company’s Qwen AI team generated 28.8 million exchanges with Claude between April 22 and June 5, 2026. That is a lot of Claude conversations, but Anthropic says this was not ordinary chatbot use. The company believes the accounts were part of a coordinated effort to collect answers that could help train or improve rival AI systems. The alleged campaign reportedly focused on some of Claude’s most valuable skills, including software development, multi-step reasoning, and agentic tasks. In practical terms, that means getting an AI model to plan and complete work across several stages rather than simply answering a single question. This is called 'distillation,' where AI companies use outputs from a larger model to train a smaller and cheaper one. The smaller model learns to imitate useful parts of the more capable system without needing the same amount of computing power. The distillation process isn't automatically suspicious, but the problem comes when one company gathers another provider's outputs without permission and at an industrial scale. Also, this does not mean Alibaba obtained Claude’s source code, model weights, or original training data. Instead, Anthropic claims the accounts repeatedly asked Claude carefully designed questions and collected the answers. Those answers could then be used as training material for another model. Anthropic has made similar accusations against DeepSeek, Moonshot AI, and MiniMax earlier this year. As Neowin previously reported, Anthropic said those three companies collectively generated more than 16 million Claude exchanges through roughly 24,000 accounts. Anthropic says the new campaign produced almost twice as many exchanges in a matter of weeks. Anthropic reportedly told lawmakers that the campaign could help Chinese AI developers approach the capabilities of its Mythos Preview model. Mythos is focused on advanced cybersecurity work, including finding and exploiting complex software vulnerabilities. via Reuters | Photo via DepositPhotos.com
  • Popular Contributors

    1. 1
      +primortal
      441
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      134
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!