Has Windows 10 redeemed Microsoft?


Recommended Posts

 

Feedback and user experience has always been what has shaped future versions of Windows, it isn't like your keystrokes are being recorded and sent to Redmond for analysis.

You should check that photo once more, it is exactly what is being sent to Microsoft...think of Windows now as one big Keylogger.

Yet, you do? I'm pretty sure since they didn't record voice searches (not available in Win7), or tied an email account to my login (might be possible but was never ask for in Win 7), or tie my email to my software purchases (store not available in Win7), so how could they have even collected the same amount of data?

People should be getting tired of having to opt-out of data collection, but they only want the shiny, they learned nothing from Assange or Snowden. Masas y OS shouldn't be sending ANYTHING to ANYONE unless I allow it, not by some buried switch set to broadcast unless I dig to find it, and then it should be ON or OFF. There should be no ambiguity, no "basic"! If Microsoft wasn't smart enough to listen to the people who screamed at them for Win 8, why would they listen to the quietly transmitted data from my computer about how WIN 10 is not what I want?

Opt-out has been the default requirement whenever data has been collected; if anything, accepting the End-User License Agreement (every OS period - including Linux distributions, any flavor of UNIX, etc.) is opt-in to what is covered by it by default (this DOES include MIcrosoft's CEIP - which is included in any version of Windows since XP Service Pack 2, any version of Office since 2000, and any version of either IntelliType (keyboards) or IntelliPoint (pointing-device drivers) since 8 (which dates back to XP)).  Windows 8 ITSELF got castigated for not including a Start menu - 10 fixes that.  (Never mind that adding it (and making it the default) stomped all over the tablet experience; that IS what all too many desktop-formfactor users wanted - don't tell ME that Microsoft didn't listen to the gripage concerning the lack of Start menu!)  Android is still opt-out (and it's even HARDER to do in Android than it is with Windows), and in Apple's case, you can't even opt out without a complete uninstall.  You pay a price for opting out (with any company); here is the question - are you, in fact, willing to pay it?  (To me, it sounds like the answer is, in fact "no".)

 

Correct me if I am wrong, but hasn't CEIP been an optional program to opt-in since Vista in 2006?  You choose whether or not to participate and it is an option that you can later disable if you don't want to participate.

Feedback and user experience has always been what has shaped future versions of Windows, it isn't like your keystrokes are being recorded and sent to Redmond for analysis.

No, its opt-out, which makes his stance funnier. ;)

Why gripe? Because this info is not given to the user up front that they will be doing it is my gripe.

In what other versions of windows are you talking about for the telemetry they are doing in 10?

My gripe is with the whole notion that if I give you access to my network you can just click and its shared with everyone you know.  There is one thing if you have to purposing give it to say billy or susan, but click and its shared with everyone you know - F! that.. WTF was MS thinking?

What I find funny is when it comes to a griping thread is peoples concerns our the icons are not pretty ;)  Who gives a ###### what MS is tracking - they are giving us the OS for free. I just don't get this mentality to be honest.. Then on the other hand they bitch and complain about cookies tracking that they went to site X and now site Y can see it, etc.

Although I didn't mention those issues, it doesn't mean I don't have any concerns. I've already disabled most of that crap and my issue is with the fact that it's all enabled by default and the vast majority of users aren't going to turn it off. With that said, I think you mistook my gripe as a serious concern. The word "gripe" means "express a complaint or grumble about something, especially something trivial." Icons, to me, are trivial and the issues you mentioned aren't. That's why I said it was my only gripe.

Nope, this doesn't follow. If most users wanted tiles and metro apps then Windows 8 and Windows Phone would be roaring successes.

And again, most people don't use the Windows mobile platform - as witnessed by its single digit market share - so they won't be using gimped apps and hideous metro UI "to work across platforms".

Windows Phone isn't a roaring success because all too many Windows users in particular don't want Windows on anything other than PCs.  They see Windows as specifically a PC-based operating system; they have largely despised any and all attempts to put Windows on anything else (back to, and including, Windows CE).  In the case of CE users, how many users did CE have at its peak (outside of IoT - which is what CE was used for at the tailchase of its existence)?  RT was whacked - including right here on Neowin - due to lack of Win32 compatibility - not the UI.  (Note that RT and 8 had a common UI and UX; why was the UI NOT a problem on RT, but was on 8, despite neither having a Start menu?)  And what about the portable-computing experience?  (Notice I did NOT say tablets, as portable doesn't just apply to tablets - it applies to phablets, tablets, slates, notebooks, and even laptops.  Except for some notebooks and laptops, you are not going to have 1920x1080 in those screen sizes - instead, it will be, for the most part, 1680x1050 at most, if not even lower resolution.  Unless you move application settings from the defaults, a LOT of Win32 applications are going to have issues at resolutions such as 1440x900.  However, until 8, ModernUI, and Modern Design Language, Win32 was the ONLY option for portables (and I'm talking only notebooks and laptops here - even though the first Ultrabooks and their tablet and slate offspring, had started to show up).  Not many Windows users think "notebooks and laptops" when it comes to portable computing - why is that? Is it, in fact, because, until 8, there was no difference in terms of UI or UX between desktop-formfactor PCs and notebooks and laptops?  If that is, in fact, your reasoning, then why complain because Microsoft is actually trying to SOLVE the gol-darn problem of one UI size not fitting all?

On the one hand, you complained that ModernUI doesn't fit your use case, yet on the other, you refuse to take advantage of the tweaking capabilities built into the UI itself to fine-tune it to suit you - instead, you want to backstep to the even more constrained UI as it was in Windows 7.  I liked Windows 8 BECAUSE the UI was tweakable - to suit the hardware, to suit the workflow, and - most importantly, to suit me.  Desktop-formfactor PCs are not portable - for that reason alone, some things that fit one don't fit the other.  So why would - or should - their UIs be exactly identical?

Windows 10, on the other hand, is not as tweakable, as the critics want more dependence on hardware-detection, as opposed to user-driven tweakage.  Some features that I used to be able to add on my notebooks I no longer have (because they rely on hardware detection).  Sounds to me that the issue is one of comfort and complacency - you want to ignore the problem of an unsuitable UI to your hardware by creating a constrained-but-consistent UI - in other words, the Apple Approach.  Consistency is ALL the good that can be said about the Apple UI - if anything , the default OS X UI is worse - not better - than even the Windows 7 UI, and especially in terms of edge cases (the smallest MacBooks, and the largest-screen iMacs - and don't even get me STARTED on a Mac Pro with the largest-screen Apple Cinema Display).  Reliance on hardware-detection doesn't even always make sense because hardware-detection has been known to fail (or get faulty data); case in point - I have a battery in one of my notebooks that never goes above ten percent charge; in fact, it stops charging at eight percent.  It's a brand-new (though third-party) battery - however, the reason I went third-party is due to a more dangerous flaw with FIRST-party replacement batteries for this notebook in particular.  Basically, reliance on hardware-detection doesn't get it done, and never has - why are we relying on it?

Opt-out has been the default requirement whenever data has been collected; if anything, accepting the End-User License Agreement (every OS period - including Linux distributions, any flavor of UNIX, etc.) is opt-in to what is covered by it by default (this DOES include MIcrosoft's CEIP - which is included in any version of Windows since XP Service Pack 2, any version of Office since 2000, and any version of either IntelliType (keyboards) or IntelliPoint (pointing-device drivers) since 8 (which dates back to XP)).  Windows 8 ITSELF got castigated for not including a Start menu - 10 fixes that.  (Never mind that adding it (and making it the default) stomped all over the tablet experience; that IS what all too many desktop-formfactor users wanted - don't tell ME that Microsoft didn't listen to the gripage concerning the lack of Start menu!)  Android is still opt-out (and it's even HARDER to do in Android than it is with Windows), and in Apple's case, you can't even opt out without a complete uninstall.  You pay a price for opting out (with any company); here is the question - are you, in fact, willing to pay it?  (To me, it sounds like the answer is, in fact "no".)

Yes, but it should be opt-in, it will always be opt-out because nobody reads what they agree to, my self included. I have tried to do my best to adjust Win 7 to send as little as possible, but I feel it's becoming more of a chore with each release and not worth the effort to continue to keep Microsoft and their trusted partners at bay. I don't find NOT using Win 10 to big of a price to pay...

They didn't listen, they were FORCED into reversing their Metro/Modern/TabletUI stance, that's why Win 10 is free. I don't use Android or Apple, and while I'm sure my Arch install sends data to someone somewhere, it is not tied to a store, email, phone number or credit card like Microsoft wants. 

No, its opt-out, which makes his stance funnier. ;)

Glad to amuse you, just so you know I find your love for Windows quite strange...

You should check that photo once more, it is exactly what is being sent to Microsoft...think of Windows now as one big Keylogger.

At least read the privacy statement. Emphasis mine.

Microsoft collects and uses data about your speech, inking (handwriting), and typing on Windows devices to help improve and personalize our ability to correctly recognize your input.

For example, to provide personalized speech recognition, we collect your voice input, as well your name and nickname, your recent calendar events and the names of the people in your appointments, and information about your contacts including names and nicknames. This additional data enables us to better recognize people and events when you dictate messages or documents.

Additionally, your typed and handwritten words are collected to provide you a personalized user dictionary, help you type and write on your device with better character recognition, and provide you with text suggestions as you type or write. Typing data includes a sample of characters and words you type, which we scrub to remove IDs, IP addresses, and other potential identifiers.  It also includes associated performance data, such as changes you manually make to text as well as words you've added to the dictionary.

You can turn off Input Personalization at any time. This will stop the data collection for this feature and will delete associated data stored on your device, such as your local user dictionary and your input history. As Cortana uses this data to help understand your input, turning off Input Personalization will also disable Cortana on your device. At https://www.bing.com/account/personalization, you can also clear data sent to Microsoft, such as your contacts and calendar data, user dictionary, as well as search and browsing history if your device also had Cortana enabled.

I think Windows 10 is the right direction but then so was Windows 7.  MS seem to throw everything up in the air so easily and go in new directions for no good reason.  I think this id the best MS we have seen in a long time but I believe that circumstances had lead them to this new way of doing things. 

Still don't see exactly what is being collected, or who exactly the "trusted partners" are.

You previously stated that the express settings "do NOT state what you will be sending to Microsoft," when most, if not all of the features are listed during installation. That was why I posted the screenshot.

You know, previous versions of Windows were not very explicit about the collected information either. In fact, it appears that Windows 7 turns on CEIP by default with its recommended settings: "Help Microsoft improve Windows."
windows-7-installation-24.JPG

Is my picture being taken and sent?

How could this be advantageous to Microsoft or its partners? Note that one can turn off application access to the camera, and if you are that concerned, there are other options, such as disabling (and / or disconnecting) your camera, or placing tape over it.

Is my personal information being stripped out?

Please read the Microsoft privacy statement.

They are not disclosing enough about what is being collected, but then that's the point right? If they told us exactly what was being collected they would have to stick to it and collect only that right? Oh, no wait, they can change the terms any time they want, but they will still have all that information.

The same can be said about previous versions of Windows.
 

Correct me if I am wrong, but hasn't CEIP been an optional program to opt-in since Vista in 2006?  You choose whether or not to participate and it is an option that you can later disable if you don't want to participate

Correct. CEIP for Windows was introduced with Windows Vista and is voluntary; it is not even listed during installation among the recommended (or express) settings.
How-to-install-Windows-Vista-Upgrade_vis

CEIP is voluntary in Windows 7 as well. However, unlike Windows Vista, the option to enable CEIP is among the recommended settings during installation: "Help Microsoft improve Windows."

windows-7-installation-24.JPG

You previously stated that the express settings "do NOT state what you will be sending to Microsoft," when most, if not all of the features are listed during installation. That was why I posted the screenshot.
You know, previous versions of Windows were not very explicit about the collected information either. In fact, it appears that Windows 7 turns on CEIP by default with its recommended settings: "Help Microsoft improve Windows."
windows-7-installation-24.JPG

How could this be advantageous to Microsoft or its partners? Note that one can turn off application access to the camera, and if you are that concerned, there are other options, such as disabling (and / or disconnecting) your camera, or placing tape over it.

Please read the Microsoft privacy statement.

The same can be said about previous versions of Windows. 

In Windows 10 setup they gave us more details about what they are collecting

But what is about Windows 7 setup?

They only said this about turning on Customer Experience Improvement Program by default:

This program helps Microsoft improve Windows. Without interrupting you, it collects information about your computer hardware and how you use Windows.

http://windows.microsoft.com/en-us/windows7/turn-off-settings-that-were-recommended-during-windows-7-setup

Collecting what? not a single hint about what they are collecting

There will always be people who will never admit to themselves that stealing or "sharing" our data will not be misused by large corporations, governments...etc. Those folks have succumbed to "Willful Blindness" and there is very little that anyone can do for them apart from themselves. For those that cherish their privacy here is a small and very good utility that will block or erase Microsofts data collection techniques until these have been made Opt-in.

Destroy Windows 10 Spying

https://twitter.com/nummerok

There will always be people who will never admit to themselves that stealing or "sharing" our data will not be misused by large corporations, governments...etc. Those folks have succumbed to "Willful Blindness" and there is very little that anyone can do for them apart from themselves. For those that cherish their privacy here is a small and very good utility that will block or erase Microsofts data collection techniques until these have been made Opt-in.

Destroy Windows 10 Spying

https://twitter.com/nummerok

I've always felt this attitude was ironic when someone goes onto the Internet to post.

I've always felt this attitude was ironic when someone goes onto the Internet to post.

The user didn't even address the privacy statement or arguments. That is being willfully blind and also demonstrates a lack of objectivity.

Google it, it is there ripe for the picking.

Wait don't, because that will collect information on you.  Here is a small taste, but there are many articles out there:

http://www.computerworld.com/article/2521809/government-it/nsa-helped-with-windows-7-development.html

It pulls telemetry data just like 10, including voice recordings if you use voice with it, just like 10. Its already been shown to you.

However if you don't use those features, it doesn't. I get the distinct feeling you think MS is turning on the mic and camera automatically to collect your data.

The description of the telemetry for WSR in Windows 7 and later is included in the image posted below. It appears to collect more than I had previously thought, and the text suggests that data collected as part of the document crawl process will be sent to Microsoft.

WSR-S.thumb.png.6d66225bc64abc8b51a1da81

Apple itself is promoting installing Windows 10 on Mac

https://support.apple.com/en-us/HT204990

Does demonstrating how desperate Apple are to move hardware in a vain attempt to hold low market share really showcase Windows 10 as a success :/

Apple itself is promoting installing Windows 10 on Mac

https://support.apple.com/en-us/HT204990

I wouldn't call that promoting as so much as providing instruction and a listing of supported devices.  Heck...Boot Camp has been around for 8-9 years now?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Cloud Security Fundamentals eBook —was $131.95, now free to download by Steven Parker Claim your complimentary copy (worth $131.95) of "Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms" for free, before the offer ends on July 1. Description In Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms, cybersecurity leader and educator, Jason Edwards, delivers a comprehensive guide to safeguarding data, applications, and infrastructure in the cloud. The author offers a complete walkthrough of cloud security, moving from foundational concepts to advanced, forward-looking practices. The book is filled with practical examples, hands-on guidance, and lessons drawn from real-world cloud security incidents and breaches. It equips readers with the tools and knowledge they need to defend against threats in cloud environments and how to understand coming developments in cloud technology that will impact organizations in all industries. Inside the book: A thorough introduction to cloud-native and advanced security practices for contemporary firms A chapter on relevant cloud security certifications and professional growth advice Practical discussions of foundational concepts in cloud security, including IAM, Zero Trust, and DevSecOps Complete treatments of advanced cloud security themes, like leadership strategies, operational best practices, and techniques for dealing with common and emerging threats Perfect for cloud security professionals, IT managers, and DevOps professionals, Cloud Security Fundamentals will also benefit system administrators, compliance and risk officers, consultants, auditors, and technology students in a variety of fields who require a foundational understanding of cloud security concepts. How to download for free Please ensure you read the terms and conditions to claim this offer. Complete and verifiable information is required in order to receive this free offer. If you have previously made use of these offers, you will not need to re-register. Was $131.95, but is now FREE | Below link offer expires on July 1. Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms The below offers are also available for free in exchange for your (work) email: The Vibe Coding Playbook: Building Your Tech Business with AI ($35 Value) FREE - Expires 6/23 The Persuasion Engine: How Any Business Can Use AI-Powered Neuromarketing to Understand and Win Customers ($28 Value) FREE - Expires 6/24 How to Do More with Less: Future-Proofing Yourself in an AI-driven Economy ($28 Value) FREE - Expires 6/30 Cloud Security Fundamentals: Building the Foundations for Secure Cloud Platforms ($131.95 Value) FREE - Expires 7/1 The Complete Free AI Learning: Master ChatGPT, Claude, Gemini & More ($21 Value) FREE How to Build an AI Design Workflow with Gamma ($21 Value) FREE The Ultimate Linux Newbie Guide – Featured Free content Python Notes for Professionals – Featured Free content Learn Linux in 5 Days – Featured Free content Quick Reference Guide for Cybersecurity – Featured Free content We post these because we earn commission on each lead so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. Other ways to support Neowin The above deal not doing it for you, but still want to help? Check out the links below. Check out our partner software in the Neowin Store Buy a T-shirt at Neowin's Threadsquad Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: An account at Neowin Deals is required to participate in any deals powered by our affiliate, StackCommerce. For a full description of StackCommerce's privacy guidelines, go here. Neowin benefits from shared revenue of each sale made through the branded deals site.
    • TerraMaster F4-425 Pro review: an octa-core Intel NAS that ships with AI (OpenClaw) by Steven Parker It has been a while since I reviewed a TerraMaster NAS, but the company reached out to me asking if I was willing to test the F4-425 Pro, which goes on sale today. It is an upgrade on the F4-425 Plus, which I reviewed back in October 2025 What you need to know is that it basically follows the design principles of the four-bay F4-425 series, with its all-metal exterior. Here are the most important specifications: TerraMaster F4-425 Pro CPU Intel Core N350 (8x E Cores/Threads, Max burst up to 3.9 GHz) Intel Core N305 (4x E Cores/Threads, Max burst up to 3.8 GHz) TDP: 7W / 9W (Base) Graphics Intel UHD Graphics 32 EUs (1.35 GHz) Intel UHD Graphics 24 EUs (1.25 GHz) Memory 1x slot 16 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) 1x slot 8 GB DDR5 4800MT/s non ECC SODIMM (Max 32 GB) Disk Capacity 120 TB (30 TB x 4) Supported RAID Types TRAID, TRAID +, RAID0, RAID1, RAID5, RAID 6, RAID 10 Network 2x RJ-45 5 GbE Internal storage 3x M.2 2280 NVMe Slot (PCIe 3.0 x1) Bootloader 2Gbit 256 GB NAND Flash card (MX30LF2G28AD) USB port (internal) USB Ports 1x Type-C 3.2 Gen 2 (10Gbps) 3x Type-A 3.2 Gen 2 (10Gbps) HDMI 1x (HDMI) Hardware Transcoding Engine H.264, H.265, MPEG-4, VC-1 Maximum resolution: 4K (4096 x 2160); Maximum FPS: 60 Size (H/W/D) 219 x 181 x 150 mm Weight 2.9 kg System Fan 150 x181 x 219 mm Power 90W, 100V - 240V AC, 50/60 Hz, Single frequency Power consumption (HDDs) 45W (4x 4TB ST4000VN008 in read/write state) 14W (4x 4TB ST4000VN008 in hibernation) Noise Level: 20.9 dB(A) Using 4 SATA HDDs/SSDs in standby mode; Test environment noise: 17.3dB(A); Test distance: 1m Warranty 2 Years OS TOS 7.0.0706 (Beta) MSRP £639.99, $699.99, €739.99 / £739.99, $799.99, €839.99 As you can see above, there are two variants of the F4-425 Pro releasing today. The lesser variant has the slightly weaker N305 CPU and iGP, and 8 GB less RAM, although it also costs $100 less than the top variant we are testing today. In addition, these new F4-425 Pros are shipped with the as-yet-unreleased TOS 7 beta. So what is TOS 7 exactly? During the device initialization, you are warned not to use it in a production environment, which we'll get into later. My contact told me that TOS 7 exits beta today, June 23 with version 7.0.0746. The clear difference with the F4-425 Plus is that it contains the more powerful N350 Intel CPU released in the first quarter of 2025, with support for DisplayPort 1.4, HDMI 2.1, LPDDR5 (4800), DDR5 and DDR4, and a max TDP of just 7W. It also supports AV1 decoding, as well as H.264, VP8, VP9, H.265 (8 bit), and H.265 (10 bit). The different capabilities in the Alder Lake-N (and Twin Lake) series are listed below. Processor E-cores L3-cache Turbo clock GPU GPU-clock TDP Intel N355 8 6 MB 3.9 GHz 32 EUs 1.35 GHz 9 W Intel Core 3 N350 3.9 GHz 1.35 GHz 7 W Intel Core i3-N305 3.8 GHz 1.25 GHz 9 W Intel Core i3-N300 3.8 GHz 1.25 GHz Intel N250 4 3.8 GHz 1.25 GHz 6 W Intel Processor N200 3.7 GHz 0.75 GHz Intel N150 3.6 GHz 24 EUs 1 GHz Intel N97 1.2 GHz 12 W Intel Processor N100 3.4 GHz 0.75 GHz 6 W The CPU is part of the Alder Lake-N series that sits just below the top N355 offering, albeit with an impressive TDP (less than the N355 and N305) for the features it offers. It is designed for low- powered systems and entry-level laptops. As before, we are seeing another NAS with an acceptable, if not great, amount of RAM. It should be noted that the F4-425 Pro only has one SODIMM slot, so if you are planning to upgrade the already 16GB included in this NAS, it will have to be on one module of Single Rank DDR5. As a reminder, up until a couple of years ago, it was commonplace to only get 2 or 4GB max on a flagship Synology or QNAP home NAS. Ever since the likes of TerraMaster and more have entered the market with ample RAM sizes included in their NAS offerings, it has gone a long way in forcing the hands of the traditional makers to up their game a bit. Before we dive in, you can view the different SKUs released so far since the 2025 series launched for Home and SMB users, with the most important specifications listed along with the MSRP listed below: SKU CPU Cores Memory Link Price F2-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $249.99 F4-425 Intel N5095 4 4 GB DDR4 2.5 GbE x1 $369.99 F2-425 Plus Intel Core N150 4 8 GB DDR5 5 GbE x 2 $399.99 F4-425 Plus Intel Core N150 4 16 GB DDR5 5 GbE x 2 $569.99 F4-425 Pro Intel Core N305 8 8 GB DDR5 5 GbE x 2 $699.99 F4-425 Pro Intel Core N350 8 16 GB DDR5 5 GbE x 2 $799.99 The F2 in the product name means two 3.5-inch HDD bays, where F4 is four 2.5-inch bays. First impressions Like with the F8 SSD Plus packaging, the F4-425 Pro is using the upgraded box materials, which certainly look better than a plain cream colored box with TERRAMASTER stamped on the sides. The box gives off a premium feel and certainly adds a positive vibe to first impressions. In the box F4-425 Pro TNAS device Power adapter LAN cable (CAT 6) Quick guide [full online guide] Limited warranty notice Screws (for HDD bays) Stickers 2x rubber feet (spares) Design As has become kind of common with TerraMaster, certainly in the last three years, the 2025 F2- and F4-series have received a makeover that really adds to the premium feel of the NAS. Gone are the plastic shells, now replaced with an aluminum outer shell, with the front and back retaining the textured black plastic we saw on the 2024 models. Some key differences from the 2024 series include placing the power button back on the front, along with the addition of a Type A USB port. It's not much bigger or heavier either; in fact, it weighs 500 grams less than the F4-424 Pro. It's slightly shorter in height and depth (length), but only by a few millimeters. The front and back do retain a similar style to the 2024 series. On the front, you just have your four bays along with LED indicators for the HDDs and power. The welcomed change is having a USB port on the front for quick access, should you need to back up a USB drive, for example. Around the back, from top to bottom, you have a reset pin hole, an HDMI port, two 5 GbE Ethernet ports, two USB 3.2 Gen 2 (10 Gbps) Type A ports with a Type-C port below them, and a connector for the barrel port power source. Again, there's no Kensington Security Slot present, which is a bit of a shame considering it's a data storage device. Left side Right side On the left and right of the F4-425 Plus, it is completely smooth aluminum with a TERRAMASTER logo printed on both sides. On the bottom, there are some holes to assist ventilation. Unlike with the F4-425 Plus, the rubber feet did come unstuck during the teardown, which was also an issue on the 2023 series. It seems like other customers have lodged complaints about them, as TerraMaster now includes two spare rubber feet in the box, in case any of the preinstalled ones are lost; however, this seems more like a papering over the cracks solution rather than actually fixing the issue with better quality rubber stand-offs. There are also four screws that must be removed in order to access the internals. Teardown Upon removing the four screws, you can slide the device out of its shell to reveal the three NVMe M.2 slots (PCIe 3.0 X1) and single SODIMM slot connector, which is populated with a single 16GB DDR5 4800MT/s module. I added a couple of MP44Q M.2 PCIe 4.0 SSDs (2 x 4TB) that can be availed on Amazon for $492.99 that TEAMGROUP supplied us with, along with a 250GB 970 Evo Plus that my colleague Chris White sent me by accident and let me keep a few years ago. As I have said in previous reviews, TerraMaster support staff actually encourage installing whatever you want on their devices, and happily, the USB port for the bootloader is now easily accessible should you want to use it for your own flavor of NAS OS, such as TrueNAS, Unraid, or maybe Xpenology. Yes, because TerraMaster has now switched to a 256 GB NAND Flash card (3rd photo above) for the TOS bootloader. This is also replaceable, but you can also simply add a USB bootloader, access the BIOS, and tell the F4-425 Pro to boot from that instead of the Flash card. Unlike earlier iterations of TerraMaster NAS, you don't have to tear this down any further than the four screws on the outer shell in order to be able to access and manage the memory, NVMe slots, and USB bootloader. However, if you need to access the NAND Flash card or CMOS battery, then eight more screws (four on each side) need to be removed in order to take off the rear panel with the 120mm fan, and then the motherboard can be lifted off and removed from the SATA connector PCB. There's also no risk of threading the screw holes, because the four that hold the shell in place are metal on metal, while the screws that hold the rear panel on do screw into plastic. Either way, like last time when I reviewed the F4-425 plus, I was just happier to see larger screws being used. Overall, it follows some great improvements in build quality from the 2024 series and earlier. Setup BIOS The F4-425 Pro includes an Aptio BIOS from American Megatrends [1, 2], and you can setup pretty much everything here including the boot order, which is locked to the UEFI OS, however above that choice you can enable or disable booting to the USB bootloader so this would still allow you to switch to a USB stick with an alternative bootloader and boot from it, or disable it to instead always start from the first disk with an OS installed on it. Initial Setup Setup is roughly the same as the F4-425 Plus, along with the new TOS 7 setup dialogs, so there will be no surprises here. Upon connecting to the LAN and booting up, the F4-425 Pro can be reached by navigating to http://tnas.local. If that doesn't work, you can use the local address assigned via DHCP, which you can find using the TNAS PC desktop application, which is essentially a TerraMaster NAS finder. The setup process is pretty straightforward, through a wizard, and in full below: TOS 7 Initialization As you can see, TOS 7 received a new coat of paint, and the initialization requires fewer interactions. Happily, TOS no longer decides to throw all disks into the same Storage Pool; 2.5-inch HDDs are allocated into Storage Pool 1. This is because two of the HDDs are allocated to hold system files. Previously (with TOS 5 and 6), if you pre-installed HDDs and SSDs, they were all placed into Storage Pool 1, even if you did not select the SSDs for inclusion during the onboarding. TOS 7 Setup On first boot, there is a tutorial and some steps to take to harden the TNAS (or not), which includes an immediate update from TOS 7.0.0616 to 7.0.0706, of which the changelog screenshot is also included in the above gallery. It must be noted that the Security Advisor still contains (in my opinion) a pretty major bug in that if you enable SPC and then do the required rebooting, the Security Advisor still says that SPC is disabled. TerraMaster provided the following statement about it: It is disappointing that TOS 7 has been in beta since December, and this OOBE issue is still there. Shutdown option has moved Instead of a Taskbar option to manage the NAS, all of these options have been moved to a "Start panel", initially I didn't see it and my contact had to show me how to power off the F4-425 Pro. To logout, reboot or power off you can find those controls at the top right of the Panel. It is also possible to power off through the TNAS mobile app beta. Storage setup Above, you can see the steps I took to create the Storage Pools and Volumes. I made a second Storage Pool using TRAID on two 4TB MP44Q SSDs (which, in this instance, is similar to RAID 5), and finally, I added the 250GB 970 Evo Plus drive as Hyper Cache on Storage Pool 1 in Balanced mode. Registering If you decide not to lock down the F4-425 Pro in Security Isolation Mode (blocking all external connections), then you could set up a TNAS device ID through the Remote Access setting in the Control Panel (which must be unique). This works in combination with an online TerraMaster account. TOS 7 TNAS Online Creating a TerraMaster account and linking the device online activates the warranty when you provide proof of purchase and the serial number, but it also gives you access through the TNAS mobile app, which allows you to complete certain operationsб including powering off and restarting the NAS remotely. A TNAS mobile update is required to gain access through TOS 7, and this is provided on the TerraMaster website, as it is not yet on Google Play. The app is evolving all the time and has made leaps and bounds since I first started reviewing TerraMaster devices almost three years ago. It is not quite there yet if you are comparing the likes of Synology, which, sadly, a lot of users online do all the time. OpenClaw setup One of the main selling points of the new F4-425 Pro is the inclusion of OpenClaw, with TerraMaster claiming that it is "powered by the world's first AI-native TOS 7 OS, supporting local-first smart workflows and independent data control." However, I immediately ran into problems trying to enable OpenClaw. After waiting 20 minutes at the "Enabling" message of the OpenClaw app following installation, I decided to do some searching online and discovered that it couldn't complete the installation process due to SPC being enabled, which is something TOS 7 immediately recommends to be enabled on first boot. SPC for NAS (TOS 7) is basically the same principle as UAC in Windows; it blocks executables from being launched by non-Super Users. After reaching out to my contact about these issues, I received the following response: Anyway, this only became clear when I closed the OpenClaw app screen and clicked on the OpenClaw icon in the taskbar; that is when I saw the message about disabling SPC. I think, due to the fact that this is a requirement, this should be a prompt during the installation process, not when closing the App Market and then trying to launch OpenClaw. There's also no 'Getting started' guide for people like me who have never used OpenClaw. I tried to add an LLM and discovered the tutorial led nowhere. That's when I started looking around the official TerraMaster forums, and I found a guide that helpfully explains that you won't get anywhere with OpenClaw unless you have a paid plan, which is disappointing because I imagined there would be an option to use a local LLM as I do in SubtitleEdit with Whisper-XXL. In addition, with the marketing imagery on the official site, it says that the OpenClaw feature is "all processed 100% locally for absolute privacy." which led me to believe that I could install a local LLM, not one that required paid tokens. In any case, TerraMaster does not provide guidance for this new feature, which was also a selling point of the F4-425 Pro! My contact also provided clarification about the above points I raised with TerraMaster Since it is not in the scope of the review to add paid services, I'll leave that to the people who are more qualified with OpenClaw. F4-425 Pro Surveillance App TOS also comes with a Surveillance app, which is not installed by default; it can be found in the App Market recommended section. In addition, after installing, it doesn't drop a shortcut on the Desktop or top taskbar, but you can "Send to Desktop" from the App Market listing for the app for a quick way to open it. Adding my Reolink POE doorbell camera was painless. TerraMaster doesn't appear to have a repository of preconfigured cameras; instead, the camera must be added using ONVIF or RTSP. No mobile Surveillance app TerraMaster still doesn't have a dedicated Surveillance app, although from searching online, Surveillance can be used and managed through the TNAS mobile app. I tried this with the updated TNAS mobile app beta in combination with TOS 7 and got a message that Surveillance was "Only accessible through web browser," so I reckon this must be limited to the stable versions of TOS 6 and the mobile app. More quirks In addition, whenever I minimized the Live View window in the browser Surveillance app, the feed appeared to switch to the Low-bandwidth stream, and there was no way to get the High-quality stream back. To get the High-quality stream back, I had to close Live View and then reopen it. Benchmarking A pretty cool feature of the TOS 7 is that it allows you to install directly to the NVMe M.2 SSD. In order to do that, you would have to leave out any HDDs during initialization, and even then, the system partitions are always written to two HDDs when they are eventually added. With three NVMe slots, this also gives an interesting scenario where you could build a TRAID storage Pool for installing all your apps and Docker on, and keep the third for SSD cache on the HDD pool. Limitless options! SATA PCIe 3.0 X1 A CrystalDiskMark test on a mapped network drive from within a Windows 11 25H2 PC (image above) connected over a 5 GbE hub was well within acceptable ranges. Although the read result on SATA was a little less than with the F4-425 Plus, for some reason, while writes were generally better. SATA PCIe 3.0 X1 I also ran the NAS Performance tester, which tests the link speed performance. As you can see, it pretty much maxes out the 5GbE connection. Of course, you can also opt to bond the two 5 GbE connections for a bit more umph, but I didn't do that. TOS 7, which, as of testing, is still in Beta, comes with an App Center that has a bunch of handy programs you can install right off the bat, such as Emby, Plex, Docker, as well as in-house Backup and Surveillance solutions. As you can imagine, any media streaming services you would want to host off the F4-425 Pro will work great, thanks to the Intel Core N350 CPU and its 16 GB of DDR5 memory. Accessing from mobile is only possible if Security Isolation Mode is disabled, which can put your NAS at risk from external sources, so there was no way to access it from the TNAS Mobile app. It's also quiet. I had this sat next to my computer on my work desk for the past week, and I did wonder if the noise I was accustomed to with NAS devices would annoy me, but all I could hear was a soft whirring of the rear fan (which was a little annoying) when the disks were not actively copying or reading data. Conclusion So what have I learned? Unfortunately, this release raises a few important questions and concerns that I feel haven't been adequately addressed. What I didn't like Our variant shipped with TOS 7 beta, and it's advised not to use it in a production environment. I feel that's a bit limiting on an $800 device. The mobile app is also still in beta and does not support some of the first-party apps, like Surveillance, and it still has quite a few bugs. I am a bit confused about the OpenClaw marketing along with the F4-425 Pro. I feel like that if it's going to be a main selling point, then offer official guidance on how to get started with it. TerraMaster recommends enabling SPC, but then markets the NAS for use with OpenClaw, which requires disabling SPC to be able to use it, opening up genuine security concerns for the NAS; and that's before you get into the security concerns of OpenClaw itself. Of course, the above issues won't be a problem if you decide to install something else on it, or even go back to the stable TOS 6. I wish TerraMaster had just given TOS 7 as opt-in rather than shipping with it. TOS 7 has been available as a preview since December 2025 (so well before my last TerraMaster review), and according to a thread on Reddit where a user shared a screenshot from the TerraMaster Facebook page, it is scheduled to launch today, June 23, but there's nothing about that in the TerraMaster news blog. My contact confirmed over email that TOS 7 exits beta today. The rubber feet also deserve a mention as they continue to be a problem, with them coming unstuck the moment you shift the F4-425 Pro anywhere on your desk. What I liked What it comes down to, though, aside from what I already mentioned, you are still getting a quality, affordable device here, so recommending it will depend on the individual's use case. If you're just looking for a relatively small NAS device to manage virtual machines on, backup your files, and take care of your home theater streaming, then it is a great device that will certainly futureproof you for some time. It provides good performance, takes up little space, and is, on the whole, very quiet. Four bays afford proper redundancy using TRAID or RAID 5, and you can even expand on storage capacity by adding the 2-bay D5, or 4-bay D8 Hybrid DAS over a USB 3.2 (10Gbps) link. Considering the 2024 releases were more about power, with the likes of an Intel Core i5-1235U high-end laptop CPU under the hood, I asked my contact last time if we could expect more of the same in higher-end models and was told: It makes a lot of sense to use Intel's N350 chip inside a NAS; it is more than capable of doing what the F4-425 Pro is intended for, media streaming and backup. The only downside is still the clear lack of community and even staff support on the official forums. In the past, I have had topics go unanswered for days, or there would be generic-type "we've noted this and passed it onto our developer team" type responses. Along with the other things I mentioned, it all ends up costing it a couple of points. If you are comfortable with the command line, Docker, and setting up TrueNAS or Unraid, you'll be fine. You can do great things with this hardware. In TOS, the apps are a bit lacking, and things don't always work as expected.\ AI NAS?! What has become clear to me this year is that we are going to start seeing all kinds of "AI NAS" come to market, and while that might be good for us consumers, be diligent and research these claims. Although the F4-425 Pro technically comes with AI, it is really using a cloud service that is externally sourced off-device through the third party OpenClaw app. My colleague did review a newcomer to the NAS space earlier this year, and it includes a local AI assistant inside the Zettlab D4 NAS, and they do not even use AI in the product name, check out Chris' review here. Where to buy and a discount coupon However, it does not change the fact that this is truly a great entry-level home media-class NAS that you can buy right now. TerraMaster is having a 20% off launch discount, plus you can also still apply our unique 10% off coupon on checkout, which only works on the official website. So here is a breakdown of the pricing that is only valid on the official TerraMaster website. TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = $575.99 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = $503.99 TerraMaster F4-425 Pro (N350) + 20% discount + 10% coupon = £525.59 TerraMaster F4-425 Pro (N305) + 20% discount + 10% coupon = £460.79 Use NEOWIN coupon code during checkout for 10% discount Over on Amazon US and UK, the F4-425 Pro also gets a 20% launch discount, but here, the above 10% coupon cannot be applied. TerraMaster F4-425 Pro (N350) for $639.99 at Amazon US (was $799.99) TerraMaster F4-425 Pro (N305) for $559.99 at Amazon US (was $699.99) TerraMaster F4-425 Pro (N350) for £583.99 at Amazon UK (was £729.99) TerraMaster F4-425 Pro (N305) for £511.99 at Amazon UK (was £639.99) As an Amazon Associate, when you purchase through links on our site, we earn from qualifying purchases.
    • well you can add a GPU for around $500, that's still around the price of Steam Machine but overall significantly better in performance.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      112
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!