Formula 1 World Championship 2018 Season Discussion


Recommended Posts

  • 2 weeks later...

This can't be serious? Absolutely correct, I was about to say it wouldn't sound out of place in the next Avengers movie, then I googled Brian Tyler...

 

Avengers Age of Ultron, Iron man 3, Thor The Dark World - yep, absolutely generic superhero music.

 

RIP - I can still hear you saying, You would never break the chain :(

19 minutes ago, Skiver said:

RIP - I can still hear you saying, You would never break the chain :(

Relax, that'll still be around in Channel 4's coverage, and likewise, Sky will still use "Just Drive". That new theme's replacing the start of the FIA's coverage...

...although with the new theme being a full-length one, they might be going the Formula E route this season and having it play during the grid walk, maybe even during the highlights, too.

15 hours ago, MightyJordan said:

Relax, that'll still be around in Channel 4's coverage, and likewise, Sky will still use "Just Drive". That new theme's replacing the start of the FIA's coverage...

<SNIP>

...although with the new theme being a full-length one, they might be going the Formula E route this season and having it play during the grid walk, maybe even during the highlights, too.

 

Don't play that!!!

 

Don't judge me but that is the music that tells me I need to go to the toilet, it's sort of a habit now and whilst I know it has no effect on the race I have to do it otherwise I'm dooming Hamilton to a bad race. Now I'm sat at work wanting to go to the toilet but not needing it!

  • Like 2

Melbourne gets extra DRS zone for F1 season opener

 

Traditionally, tracks have one or two DRS zones, but in a bid to further increase overtaking at a track where it is traditionally difficult, F1's governing body the FIA has created a third for the first time at Albert Park.

 

The new zone begins on the exit of the quick Turn 12, with the aim of helping drivers carry speed on the run down to the tight Turn 13 right-hander.

 

Source

Couldn't find an F1 timing sheet for FP2 so had to screenshot from the F1 website.

 

A lot closer in FP2, Verstappen's long stints looked equal to Hamiltons but we don't know fuel situation etc. As I understand it Ferrari never ran Hyper Soft so there's still some time in the bag for them and finally, weather is forecast for Rain tomorrow so really right now, we know nothing.

 

BcMwmnb.png

  • 2 weeks later...

 

Driver of the Race: Pierre Gasly - Hell of a drive getting that Toro Rosso to finish 4th.

Reject of the Race: Whoever hit the green light prematurely on Raikkonen's pitstop and ended up breaking that poor Ferrari mechanic's leg.

Impressive drive from Vettel to maintain and preserve his soft tyres. Bottas really should have been able to put Vettel under more pressure. He'll be scratching his head, that's for sure. Hamilton was definitely the loser when it came down to overtaking backmarkers. 2 seconds from Bottas to 6 seconds whilst being on fresher tyres. I thought for sure Bottas would let Hamilton pass to try overtake Vettel as he was lapping much quicker at the time before the backmarkers.

 

Another poor pitstop and unsafe release from Ferrari concerning Kimi Raikkonen. Raikkonen must be fuming. He seems to be able to match Vettel's pace so far this season.

 

Driver of the day for me was Gasly. He was well composed throughout the race. I imagine Gasly would have been under a lot of pressure. Amazing drive.

Lots of respect to Vettel for this one, I was saying after it was clear they were gonna go to the end that there was no way he would make it to the end on those tyres, same old story where they push too far and the tyres blow on them but not only did he make them last he was really competitive too.

 

A massive amount of respect from him for this defence of Lewis too, glad someone called out the BS on trying to create drama where there isn't any. 

 

 

 

 

Quote

Ferrari and Mercedes will receive a much smaller share of F1’s prize money from 2021 under new plans for how the near-$1 billion fund will be shared out.

 

Formula One Management’s commercial rights holder Liberty Media presented its proposed changes to teams in Bahrain. RaceFans has learned from sources how it intends to cut top teams’ payments and hand more money to F1’s smaller outfits such as Williams and Force India.

 

Ferrari’s unique Long Standing Team payment, which by itself is worth more than some teams’ entire prize revenues, will be scrapped. The payment, worth $68 million last year, will be replaced by a $40 million payment which must be taken as company profits, RaceFans understands.

 

The Constructors’ Championship Bonuses and other special payments to teams will not continue under Liberty’s plan. Instead the prize fund will be more closely linked to where each team finishes in the constructors’ championship.

 

The fund will continue to be split equally into two columns, the first of which will be shared equally between the teams, as before. The second will distribute payments based on their constructors’ championship finishing positions. While the payment to the first-placed team will fall from 19% to 14%, the last-placed team will continue to receive 6%, and the incremental gaps between them are evenly spaced.
 

Based on the details of Liberty Media’s F1 prize money plan for 2021, RaceFans has modelled how much money each team could receive under the new structure.

 

For ease of comparison we have used the 2017 constructors’ championship finishing positions for each team and assumed a total prize fund of $1 billion. All figures are $m.

5ace0728b7904_screenshot-www.racefans.net2018_04.1114-01-19.thumb.png.dacbdff49cfd8998f2efd685cbd33971.png


NB. Under the 2021 prize money structure Ferrari would receive an additional $40m which must be written to group profits. Each engine manufacturer would also receive an additional $10m. These are not reflected in the tables and graph above.

https://www.racefans.net/2018/04/11/revealed-the-winners-and-losers-under-libertys-2021-f1-prize-money-plan/

  • Like 1
This topic is now closed to further replies.
  • Posts

    • Halo: Campaign Evolved is out next month with new prequel missions by Pulasthi Ariyasinghe Microsoft offered a look at the upcoming Halo: Combat Evolved remake at the Xbox Games Showcase today. The Halo Studios-developed title is not only getting a fully remade campaign, but also new content in the form of a fresh story arc featuring Sgt. Johnson. Fans don't have to wait long, either, as Halo: Campaign Evolved is releasing next month. The new content joining the original campaign consists of three new missions that have the name "Operation: METEORITE" attached to the full project. Aside from ground-based combat, space missions are also included here. These prequel missions will take players to events set before the original campaign, where the Master Chief and Sgt. Johnson duo team up for a clandestine UNSC operation aboard a Covenant research vessel. The studio says that the story for these missions was written in collaboration with award-winning sci-fi author Troy Denning. "Operation: METEORITE gives players a chance to expand their experience with new locations, new enemy variants, more weapons from across the Halo series, and new ways to play within the Halo sandbox, all while getting to spend more time with beloved characters and witness a new event that adds to the legacy of their heroic history," adds Halo Studios. Today's new trailer showed off the game in action, including the new missions. Catch it below. Halo Campaign Evolved is coming out on July 28, 2026. It will be available across PC, Xbox Series X|S, and PlayStation 5 with a $49.99 price tag. A digital premium edition will also be available for $69.99, offering five days of early access, extra in-game skins, and a digital art collection. A $199.99 physical Collector's Edition is also incoming, bringing a Master Chief statue, a Cortana chip, a Steelbook case, and more.
    • To give context to everybody, I bought about 2 sets of RAM, ddr4, 3200, 64 gb, 2 years ago. It costed me 150 usd for each set. If you buy RAM now you only incentivate companies to sell you expensive stuff, as Nvidia did.
    • KillerPDF 1.4.2 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~10 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.4.2 changelog: What's new PDF form filling. Interactive PDF forms now render their fields (text inputs, checkboxes, radio buttons) as live controls. Fill them in directly and save — field values are written back into the PDF. PDF outline (bookmark) navigation. A new OUTLINES tab in the sidebar displays the document's bookmark tree. Click any entry to jump to that page. The sidebar auto-fits its width to the longest entry on open and can be dragged wider; switching back to PAGES snaps to the pages-mode width. Fixed Page rotation no longer reverts after saving. Rotations applied via the sidebar context menu now persist correctly through the save pipeline. Copied text words were out of order on PDFs where glyphs are stored in non-reading order (Issue #66). Text extraction now sorts words by position and uses a dynamic line-grouping threshold so both drag-select and Select All produce correctly ordered output. PDFs with malformed or non-standard XRef tables now open in read-only mode instead of showing "Invalid entry in XRef table" and failing entirely. Download: KillerPDF 1.4.2 | 6.1 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "...a low price of just $340..." I don't think it means what you think it means.
    • This Corsair Vengeance DDR5-6000 32GB RAM with RGB is a great deal for limited time by Sayan Sen Memory prices have been through the roof for a while, though it seems like things might finally be getting better. If you are in the market for one, then grab this Corsair Vengeance DDR5 32GB (2x16GB) DDR5 6000 CL36 kit with RGB for a low price of just $340 (purchase link under the specs table down below). The kit is compatible with both AMD and Intel systems as it supports both EXPO and XMP overclocking profiles, respectively. 6000 MT/s is often the sweet spot for many systems as it provides ample data transfer speed while still being on Gear 1 mode. This Vengeance variant has RGB so if you love bright setups with such lighting, this is a win-win for you. The technical specifications of the Corsair Vengeance memory kit are given in the table below: Specification Value Memory Type DDR5 Memory Size (Total) 32GB Kit Configuration 2 × 16GB Form Factor UDIMM (Desktop) Pin Count 288-pin Speed (Data Rate) 6000 MT/s Speed Rating PC5-48000 Tested CAS Latency 38-44-44-96 Voltage (Tested) 1.35V Performance Profile AMD EXPO & Intel XMP Heat Spreader Aluminum heatspreader Cooling Type Passive (Heatsink) Lighting Ten Zone RGB Software Support Corsair iCUE Get it at the link below: CORSAIR Vengeance RGB DDR5 32GB (2 x 16GB) 6000 CL38 – Gray (CMH32GX5M1E6000Z38): $339.99 (Sold and Shipped by Woot US, Fulfilled by Amazon US) This Woot deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      66
    5. 5
      Skyfrog
      65
  • Tell a friend

    Love Neowin? Tell a friend!