P4 1.8GHz or AMD Athlon XP And Why?


Recommended Posts

One thing that everyone seems to forget, especially the AMD supporters is that Intel has abandoned the x87 instruction set in lieu of "Netburst.". The AMD is still mired deeply in that x87 set. Trying to benchmark these two CPU's on an even playing field is impossible because of this. Most of the current benchmarks are weighted heavily in favor of x87 and as a result the Intel processors find themseleves at a distinct disadvantage. A 1.5GHz P4 will run x87 at about the same proficiency as a PIII 850.

It's like trying to benchmark an eagle against a barracuda, each will outperform the other in it's defined environment. Unfortunately, there is not enough software written that takes advantage of Intel's new instruction set, so they do in fact run slower on the current software/benchmarks.

I would still take an Intel processor over an AMD simply because Intel has been in the chipset business for quite some time. The 440BX was one of the longest running, fastest and most stable sets ever made. Intel knows how to optimize it's processors with companion chipsets.

Further, heat is an issue. I have been building and servicing PC's for 7 years and I can tell you two things based on my experiences.

1. AMD systems are not as stable.

2. Very few people ask for AMD by name compared to those who only want Intel.

I read here that reviews on sites such as Tom's Hardware prove this or that. Well Tom's Hardware is the least bias site on the Internet when it comes to this issue. For example, not too long ago they did a Celeron/T vs. Duron comparison.

http://www6.tomshardware.com/cpu/02q1/0201...0103/index.html

If you read the set up closely, the mainboard they placed the Celeron on did not have the ability to utilize PC133 memory, yet the Duron's did. The ensuing results were slightly in favor of the Duron, but with a better board I have no doubt the Celeron would have prevailed or at the very least been more competitive.

Last week, I built a Celeron 1.2 Tualatin, on an Abit ST6 board with 256MB of PC133 and a 64MB GeForce 2 GTS Pro Video card. It ran just under 7000 in 3DMark 2000. I thought that was pretty damn fast for a $99 processor on a $100 mainboard with an older Video Card.

In any event, this arguement will never be settled.

I for one choose Intel. And a newbie is the last thing I am.

Krome posted:

       

Most AMD user wants power. Most AMD users are very young and new to computers. In reality, if you want power, you get power but you will loose quality. AMD users does not understand what quality is. To them, power is speed, speed is power. That's all they care. Don't talk quality to them. They'll make you think that power is their quality of their CPU. Yes. But quality and reliability has to be equal out or you else you don't have quality. They are young. It will take times for them to understand everything. The law of the universe is if you want the best of one thing, you have to sacrifice another. That's what AMD chip is all about. They neglect reliability over quality. I am not surprise if AMD user wouldn't understand my wide-spectrum of logical reasoning. Once you are fixed to something, it's hard for you to give it up. What I would be surprise is if there's Intel (Pentium) users that are very young. This is because they are smarter than average.

I have some questions for you;

1.) Why do you think that AMD does not produce quality chipsets? Ever since then K7 series hit the retail shelves AMD chips have been extremly reliable. Yes, there were compatibility problems with some bios, some gpus' and certain installs of Windows. But that was well over a year ago. At the same time AMD was having these compatibility issues, Intel was also going through a wide series of motherboard issues. This became so bad that a large number of retailers dropped their Intel certification (roughly 15%) because compatability issues with Intel chips were costing them too much money. I am responsible for a moderate (20+) number of machines, and as each Intel chip goes down, an AMD takes its place. Over 2 years that's been 10 chips. (Which is nice because that means I stay pretty current on the latest chipset...)

2.) Power doesn't equal quality, but don't you think it has something to do with it? I take from your post that you would disregard a chipsets overall performance in determining quality. This absolutley must be included in determining overall chip quality. The time and cost of fixing any incompatability issues is in direct relation to the money an employeer loses by deploying slow workstations. Render time, save time, network time (computing time) equals hard cash when that time is veiwed over the long term. Dollars a day waiting on a slow processor becomes thousands of dollars when looking at tens/ hundreds of employees over weeks/months. With AMD & Intel having almost zero difference in compatibility, AMD does process faster than Intel, hands down. In cost of deployment and long term production, AMD is the clear winner in the x86 field. (I love/ hate Macs and they run a slightly better dollar value than AMD based PC's in terms of long term production, but that's another discussion.)

3.) What do you think about the current roadmap of Intel vs. AMD? It was announced several months ago that both Intel and AMD are working on new bus systems to replace our outdated standard. The difference being that AMD is establishing these standards in line with a consortium of Mobo manuf., while Intel is going at it alone. AMD's system is supposed to support legacy bus cards, such as PCI, while Intel's won't. Hmmm. See any problems for Intel coming?

Even the quality of the chipset design roadmap comes into question here. Why did Intel revamp the P4 to handle instructions like it does? For the clock speeds alone? Out of all the chipmakers, Intel is still riding high on the misconception (read: taking advantage of public) that clockspeed=power. AMD is expanding the chipsets pipeline bandwidth, is running wild with DDR, and is designing their chips to handle instruction sets more like Motorola does (kinda - this is hard to describe non-technically -> help?), which will be far more efficient. (Although if Intel goes through with hyper-threading they will be so very cool I'll scream, AMD...watch your back)

4.) Please explain exactly what your "wide-spectrum of logical reasoning" is. Even my 4yr. old nephew, who seen Star Trek, knows logic is based upon factual reasoning. Abstract logic, systems logic...all logic references from some factual point. I missed yours. I found a few opinions, none of which were backed by statistics, experience or any technical information.

I am an immature AMD supporter. They won me over with their cool green logo and really insane processing power. Wow. I AM FRAGBAIT ! (with 10 yrs. experience in IT...)

Originally posted by obsoleet  

for not being a newbie you should know that there is no such thing as a celeron tulatin...it's the Pentium III-M or P3 tulatin.

What the heck are you talking about man? All of the new Celerons are Tulatins. They require a FC-PGA2 compatible chipset just like a PIII Tulatin.

DeadZombie:

Legacy? Do you still have an ISA slot in your AMD Athlon 2000? I didn't think so. Legacy is a BOTTLENECK.

Soma:

"Opinions mean nothing to me... It was once an opinion that the sun revolved around the earth, it was once an opinion that the earth was flat, and it was once an opinion that by allowing someone to nearly bleed to death, you could drain them of a certain disease or sickness they had... "

Actually, none of these were based on opinions, but what were considered "fact" at the time. In fact, the opinion that the sun revolved around the earth (Ptolemy's Earth-centered view) was mathematically based and indeed DID work (until new findings arose). This has nothing to do with this conversation, but I thought you might find it interesting.

I'm sorry, if i knew you judged this type of thing on how well it runs without the fan (BTW, the Athlon XP runs as well and shuts down unlike the Athlons before it) i'd say GO PENTIUM!

Sorry. But when a slower AMD Athlon XP beats a much faster Pentium 4 in 9 out of 10 benchmarks, for half the price, I go for the best one -- the Athlon XP.

toms did benchmarks. hard did benchmarks. I did benchmarks. anand did some benchmarks. tweak did some benchmarks.

Take 10 benchmarks comparing both you'll see the XP is equal or BETTER than the Pentium 4.

Just my $.052 (Inflation rates)

I don't know why you guys keep bringing this up.

Both chips use a different clocking scheme.

Simple as that, you can't compare point for point.

If you really compared point for point than consider that an 800 mhz MACINTOSH can kick the living crap out of any AMD invented thus far.

I read about the first 2 1/2 pages of this so if this seems out of place you know

Just my 2 cents, but here are the advantages to the Athlon:

9 stage pipeline (PowerPC G4s have a 7-10 stage, smaller pipeline means more IPC but lower clock speed)

NVIDIA nForce chipset!!

Cheaper

MP capable out of the box

Easily OCed

Intel Disadvantages:

20 stage pipeline (very low IPC so much so that the clock frequency must be around 3.6ghz to make it worth it)

Poor DDR support

RDRAM is highspeed but not very wide being only 16 bit

QDR FSB, thats only 100mhz core, AMD has a 133 to get DDR 266

Go with Athlon because it perfectly balances IPC and MHZ to give you maximum performance at a better price.

And for you Intel guys, its sad that a 1.67ghz part can beat a 2.0ghz and meet a 2.2ghz

Heinrich-X; Right On! Don't forget if the pipeline needs to be flushed the new P4's take about 4 times longer than an Athlon XP.

and oh yeah, AMD chips don't overheat in properly built systems.

That's like saying your HD doesn't work because you use it to hold your refrigerator magnets.

you guys are ****ing stupid. I have an athlon system i built not too long ago and it has endless heat probs and **** . I use a thermaltake Volcano 5 HSF and arctic silver II and the damn thing still hits 50 C! My P4 on the other hand runs at 28C all the time pretty much and whoops my athlon system to hell :evil:

volcano 5 is a **** heat sink and are you sure u applied the artic silver correctly??

too much artic silver and it will raise the temp rather then cool it

i dont have a prob with my XP

u probbably dont know how to build computers or something i dont see any other thing it could be

listen when u put on the artic silver 3 make sure its a paper thin layer not tooo much!!!

also thing about getting yourself a better heatsink

and also some system fans not for your cpu but for peripherals my mates Intel CPU used to be ok temp but his case insides was very very hot

get yourself some fans i went over the top but this is my case for my AMD XP 2000 my mate with the intels case is more or less the same

we wanted it coz it looks cool and also for some serious overclock power

the window mod lights up to neon blue in the dark

Rockin69-2.jpeg

Rockin69-3.jpeg

the inside is very cool had to do a simillar set up to mates Intel

if u dont like noise then get yourself a speed adjuster contoller it switches fans off 1 by one but if u want sheer overclocking power as my mate and i then u need to keep system cool with fans

not as many as mines 1 or 2 will do the job if your not gonna overclock

You know what's funny also.. some of these kids have a so-called "kickin'-Intel's-ass" processor, but then they own something like a 56k connection.. talk about using that PC to get more FPS! ..like it would matter.. but good points put out by Freeza, hats off to him :)

and by the way irdawood, could you heat me up some hotpockets?

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • No, size is not the only selling point. I did not even remotely say that. Your claim was that "building your own will be faster and cheaper". This is false. You cannot build something close to that form factor with off-the-shelf parts. You can build a Mini-ITX PC and pay more, or something larger and pay less. But these are different market segments. It's apples and oranges.
    • There is a default resolution setting in Settings > Display that can be changed with a click. You can also change the settings on a per-game basis. No CLI needed. Also, Steam has countless games that are not "[perpetual] alpha/beta games", so no need for the straw man. Plus you can use other stores as well. And console games (e.g. PS5) cost a fortune, which itself more than negates the price subsidy on the system, unless you plan on exclusively playing 1 or 2 games. It's true that you shouldn't buy a system that doesn't support the game(s) you want to play, but I think that's kinda obvious, and applies to every console as well as PC. I don't game in the living room and have no need of a Steam Machine, but there is a clear market segment that would find it useful.
    • RSS Guard 5.2.0 by Razvan Serea RSS Guard is a simple (yet powerful) feed reader. It is able to fetch the most known feed formats, including RSS/RDF and ATOM. It's free, it's open-source. RSS Guard currently supports Czech, Dutch, English, French, German, Italian. RSS Guard will never depend on other services - this includes online news aggregators like Feedly, The Old Reader and others. RSS Guard is developed on top of the Qt library and it supports these operating systems: Windows GNU/Linux OS/2 (eComStation) Mac OS X xBSD (possibly) Android (possibly) other platforms supported by Qt The core features of RSS Guard are: support for online feed synchronization via plugins, Tiny Tiny RSS (from RSS Guard 3.0.0). multiplatform, support for all feed formats, simplicity, import/export of feeds to/from OPML 2.0, downloader with own tab and support for up to 6 parallel downloads, message filter with regular expressions, feed metadata fetching including icons, simple Adblock functionality, customized popup notifications, Google-based auto-completion for internal web browser location bar, ability to cleanup internal message database with various options, enhanced feed auto-updating with separate time intervals, multiple data backend support, SQLite (in-memory DBs too), MySQL. is able to specify target database by its name (MySQL backend), “portable” mode support with clever auto-detection, feed categorization, drap-n-drop for feed list, automatic checking for updates, ability to discover existing feeds on websites, full support of podcasts (both RSS & ATOM), ability to backup/restore database or settings, fully-featured recycle bin, printing of messages and any web pages, can be fully controlled via keyboard, feed authentication (Digest-MD5, BASIC, NTLM-2), handles tons of messages & feeds, sweet look & feel, fully adjustable toolbars (changeable buttons and style), ability to check for updates on all platforms + self-updating on Windows, hideable main menu, toolbars and list headers, KFeanza-based default icon theme + ability to create your own icon themes, fully skinnable user interface + ability to create your own skins, “newspaper” view, plenty of skins, support for "feed://" URI scheme, ability to hide list of feeds/categories, open-source development model based on GNU GPL license, version 3, tabbed interface, integrated web browser with adjustable behavior + external browser support, internal web browser mouse gestures support, desktop integration via tray icon, localizations to some languages, Qt library is the only dependency, open-source development model and friendly author waiting for your feedback, no ads, no hidden costs. RSS Guard 5.2.0 changelog: Added: Feed auto-fetch can now also be delayed while Feral GameMode is active on Linux and startup auto-fetch is skipped when GameMode is already active. (#2265) WebEngine builds can now use RSS Guard generated proxy auto-config (PAC) rules so article/web browsing follows per-account and per-feed proxy settings more closely. (#2273) Generated PAC rules now also cover related subdomains and use Public Suffix List data, so feeds such as feeds.bbc.co.uk can also proxy resources from images.bbc.co.uk. (#2273) Standard feeds can now define extra proxy domains, useful when article images, stylesheets or other page resources are loaded from a CDN or another domain that should use the same feed proxy. (#2273) RSS Guard now asks for proxy credentials when a WebEngine page needs proxy authentication and can fill credentials from the current feed proxy when available. (#2273) Network settings again include an option to ignore all cookies, which clears stored cookies and prevents new cookies from being accepted. Standard RSS/ATOM feeds can now individually ignore cookies while downloading feed data. Stored cookies can now be deleted from the Tools menu. Custom skin colors can now override the feed list article count color separately from feed titles, including a separate highlighted color. (#2275) Settings dialog can now search across available settings and highlight matching controls. (#1754) Standard RSS/ATOM feeds can now optionally be reported as broken when they are valid but contain no articles. (#2039) Standard RSS/ATOM feeds can now override the application-wide feed connection timeout per feed. (#1023) Tray icon can now use a custom background color and unread-count text color, with an option to reuse the generated icon as the application icon. (#1973) Support for more benevolent parsing of Gemlog entries (#2295). Article list can now show when an article was received by RSS Guard. (#947) Feed deep discovery now actually scrapes all links found in the website and checks if they are feeds or not. This greatly enhances usability of the deep discovery mode and discovers many more feeds than before. (#2306) Search boxes now show a small dot when the feed or article list is hiding some items because of active filtering. (#873) Articles now have a shortcut-assignable action to open the homepage of the feed they belong to. (#2060) Fixed: Parallel feed updates no longer crash when multiple update results are processed at the same time. (64cf521) Links in WebEngine articles opened from feeds such as Kill the Newsletter now open correctly instead of being swallowed by the embedded page. (#2272) Relative article URLs resolution was kinda broken. (#2282) Clicking article URL did not work when the URL had "fragment" set. (#2293) The default proxy setting now uses Qt/system default proxy behavior instead of forcing no proxy. (e0263ad) WebEngine article loading now keeps the current feed context, so feed-specific proxy credentials remain available while the article page loads. (fdd0f00) Download: RSS Guard 5.2.0 (64-bit) | Portable | ~ 130.0 MB (Open Source) Link: RSS Guard Home Page | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This is gonna separate the creeps from the rest of the crowd.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!