Recommended Posts

I predict i shall get:

English: B

English Lit: B (maybe C if i have too much Shakespeare to do.)

Double Science: B & C?

Maths: F ;)

Spanish: B

RE: B

PE: D

and for ICT i will get 4 A*-C's (expect A* in at least one of the unit's and between A-C for the other three)

12 of those ******s should be enough:P

(lots of gcse's to get:P i could push some to B's and some to A's but i messed up in year nine and year ten so i am ****** from now till the end of year 11, so i have to try for these B's and C's mostly. DO NOT take more than you can handle, even if you think you can. DO NOT miss coursework:( DO NOT skip school. both too late for me.)

All i need is what, 6 to get into any college?

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585813290
Share on other sites

I got 6a's and 4b's last year! WIsh i would have worked, need 5a's or a*'s to get into my school's 6th form so i just scraped in!!!

I have AS levels this year - and hope to get 4a's (im predicted this) as im working this year. I hope to do law at uni. so that's why i need high grades. ahhhhh

Good luck all!

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585814461
Share on other sites

Hey All, I did my GCSEs in 2003, did a year of AS levels (Maths Physics and Electronics) (finished 2004) and Im now doing a degree in computing in university........ :D

my message to all GCSE students:

Dont listen to what people say, do what you want.....you just got to jump at the chance and look around instead of having your head in the sand.

ChocIST

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585814489
Share on other sites

Hey All, I did my GCSEs in 2003, did a year of AS levels (Maths Physics and Electronics) (finished 2004) and Im now doing a degree in computing in university........ :D

my message to all GCSE students:

Dont listen to what people say, do what you want.....you just got to jump at the chance and look around instead of having your head in the sand.

ChocIST

585814489[/snapback]

Next year I want to Maths, Physics, Electronics and Computing. Since you did most of them for A-Levels, what did you think?

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585816837
Share on other sites

i have been struggleing in my gcses and need to work my ass off samlearning and bbc bitsize dont teach u enough anybody no good reviosn ideas i need 4 a- c's to get in college. i find revising for scince hard i dont no any good ways or have n e thing good to revise from. i have a home tutor for maths and doing like loads of past gcse papers and half stuff i dont know as my skool is **** and i have had supplys since christmas. English litriture is a ****ing ass. Applied ict easy :) just scince and english need good ways to revise

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585816845
Share on other sites

I found the GSCE Bitesize website quite good, but I didn't do that much revision. I found the actual GSCE's easier than the mocks, so maybe I got lucky.

Don't worry too much about them, and guess rather than leave questions blank. 5 A-C's should be enough for most sixth-forms/colleges. BTW I went to College when I left as I'd had enough of my school, and it was quite awesome :)

I hear they pay you now ?10-?30 a week (plus additionals for coursework) in Sixth-form and College.. lucky bugger:p:p (not sure if this is only in Wales though)

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585816894
Share on other sites

i have been struggleing in my gcses and need to work my ass off samlearning and bbc bitsize dont teach u enough  anybody no good reviosn ideas i need 4 a- c's to get in college. i  find revising for scince hard i dont no any good ways or have n e thing good to revise from. i have a home tutor for maths and doing like loads of past gcse papers and  half stuff i dont know as my skool is **** and i have had supplys since christmas. English litriture is a ****ing ass. Applied ict easy :)  just scince and english need good ways to revise

585816845[/snapback]

the way im doing it is making mind maps for each section of a subject. So for science im braking it down, and doing big A3 mind maps in colour

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585817266
Share on other sites

Next year I want to Maths, Physics, Electronics and Computing. Since you did most of them for A-Levels, what did you think?

585816837[/snapback]

If you're a good student, i.e. think you can get As in Maths & Physics at A levels, realistically, then don't bother doing Computing. It is an utter waste of time - no decent university cares about it, even if you want to study electronics/computing at university. As for going straight into a job after A Levels (if that's what you plan) then Computing A level offers no practical help (you'd have picked up everything it'd teach you by now if you were interested).

My advice is to do some other subject that you might be interested in, e.g. Economics, Geography...etc, something that shows you can deal with numbers but also interpret what they mean argue your points. Trust me on this, in the real job world, those skills count for a lot more.

Parimal

PS. I am MSc Maths & Computer Science student at Bristol University.

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585818559
Share on other sites

ummm well if you thin about it .... Your G.C.S.E results determine the courses you do at A/s or A2 ... Alevels determine your Uni / Course .. And  your degree determines your job . So revision is important :)

585818321[/snapback]

If you think about it, some people are happy being a dustman. You don't need to go to university for a good job... Its all about what you know and who you know.

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585818575
Share on other sites

Don't get to worried about GCSEs, if you're going onto college/uni then they don't really mean much . Sure put in a bit of effort to revision if you need it (will also get you in good habits) but don't get too stressed about them or anything.

I personally did about 1h20min revision for all my subjects combined, I still got decent results (3 A*s, 4 As, 2Bs, 2Cs) but I could have done a lot better.

585809762[/snapback]

Actually, your GCSEs do count toward getting into university. Most (maybe all) universities specify two or three subjects at A-level or equivalent and three-five different subjects at GCSE level. Most also expect you to have Cs at least for GCSE English and Maths.

Also, how you do at GCSE may affect your options at A-level. For example you usually need a good GCSE maths grade to do A-level maths, and to do a language A-level you will probably need the relevant language GCSE.

Back on topic (nearly), it isn't a good idea to compare your revision techniques to other people's too much. Everyone has different strengths and weaknesses, and needs to revise different amounts and in different ways for different subjects. (Though I'm sure it can't hurt to exchange ideas).

However, GCSEs are not hard. As long as you do your coursework and some preparation, there is no need to stress too much. I got A*, A*, A, A, A, A, B, B, C at GCSE, and A, A, B, B at A-level. I could have done alot better at GCSE, a bit more work could have turned two of those As into A*s I think and one of the Bs into an A. Also, if I had put more effort into my A-levels then I could have got straight As.

One other thing, alot of people I know got better GCSEs than me with less effort. However, when they got to sixth form they expected to carry on in the same way (no effort) and fell on their faces, getting lower grades than they expected (I got better A-level grades than all of my friends who'd got better GCSEs). This is because you really have to earn A-levels, they are alot harder.

Link to comment
https://www.neowin.net/forum/topic/311422-gcses/page/2/#findComment-585819437
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Those extra reboots are related to the UEFI Secure Boot certificate update thing.
    • Hands on with the ProtoArc EM25: Affordable ergonomic mouse that focuses on the right things by Taras Buria ProtoArc is known for making all sorts of office products with a big focus on ergonomics and comfort. Its latest product, the EM25, promises a comfortable-to-use, affordable, and customizable mouse. We took one for a spin; here are our impressions. The ProtoArc EM25 is a $49.99 mouse, but right now, during Prime Day 2026, you can get it for just $37.99. Right off the bat, you can see that the EM25 is inspired by Logitech's MX Master lineup and the legendary MX Master 3/3S. Its shape and proportions are very similar, so for a person with large hands (right-handed person, mind you), the EM25 is very comfortable to use. The mouse fills the palm, and the thumb rests on a small extension, giving your wrist a small tilt to reduce strain. The mouse is made of black plastic without any coating, eliminating long-term wear concerns. However, I can see the main buttons and other areas you touch the most getting polished over time. Despite its size and bulk, the mouse is not too heavy. It weighs about 100 grams, which is significantly less than the MX Master 3S and its successor. It is no lightweight gaming mouse by any means, but it is not excessively heavy like the MX Master 4. The EM25 has a built-in storage for its USB dongle. It is a cleverly made magnetic flap that you open by simply pressing on it. Next to the flap, you will find the on/off switch, the 1,000 Hz sensor, and a DPI button (up to 8,000 DPI). I find the DPI button location a bit odd, and I would prefer it somewhere below the main scroll wheel. Still, given that I never change DPI on my mice, I will let it pass. What is more important is that, unlike MX Master 3/3S/4, the device switch button is located below the left-click button, which allows you to switch devices without lifting and flipping the mouse. For a multi-device setup, this is a perfect solution: the button does not require too much effort to use, it does not get in your way, but it is also easily reachable with your thumb. The main scroll wheel has two modes: ratcheted and free-flow. You can only change between them with a bright orange button (I like this little touch of color), which is sprung and requires some effort to press. The wheel is dead-silent in free-flow mode, but ratched is quite loud and stiff, perhaps even too much to my liking. I can hardly call it deal-breaking, but it will certainly take some time to get used to. The side scroll wheel, it is notched, silent, and pleasant to use. Next to it, you can find a piece of glossed plastic with connection indicators: Dongle, Bluetooth 1, Bluetooth 2, and the low battery indicator. By the way, the built-in battery is rechargeable via a USB Type-C cable, which is included. It is sleeved and has an orange velcro strap to keep it tidy. After using the EM25 for a few weeks, I can say that its main buttons are my absolute favorite. They have very pronounced clicks, which feel great with just the right amount of force required to register a press. I would say they feel like something in between regular mouse clicks and silent ones. You can hear and feel the springy switch, but it is not sharp or loud to the point of annoying you. As for back/forward and device switch buttons, they are very clicky and quite noisy. Unfortunately, there are no extra buttons that you can map to specific things like in the MX Master lineup. Besides great primary clicks, another thing I like about the EM25 is its 1,000 Hz sensor. In the world, where Logitech still uses 125 Hz sensors in $100+ mice, seeing a much faster sensor in a mouse that costs three times less is very refreshing. Also, all the settings and customization you make are stored on-device, and you do not need to install any software. Just open the web-based app and change all that you need. Speaking of customization, you can remap what buttons do, adjust the DPI, and the sensor speed. Sadly, gestures are not supported, but you can still map pretty much anything to each button, including shortcuts, media buttons, and more. I also recommend using software like XMouseControl, as it will let you remap the side scroll wheel. At the end of the day, the ProtoArc EM25 is a great mouse. Clearly inspired by the MX Master lineup, it takes the best of it and complements it with a much more wallet-friendly price tag, significantly better sensor, on-device memory, a built-in storage for the dongle, and more (it fixes everything that I complained about the MX Master 4 recently). And for only $37.99 during Prime Day, the EM25 is an easy recommendation. Buy ProtoArc EM25 mouse - $37.99 | 24% off with Prime As an Amazon Associate, we earn from qualifying purchases.
    • Pretty nice tool, thanks
    • Indeed. But note that this has Wifi7, HDMI 2.1, BlueTooth 5.4, and 5G Ethernet, so even in the additional features list this bundle blows the Steam Machine away. And, with the money saved, one could improve this dramatically.
  • Recent Achievements

    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      161
    3. 3
      PsYcHoKiLLa
      107
    4. 4
      Michael Scrip
      83
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!