Mighty Mouse


Recommended Posts

Let me get this straight;

It's an optical mouse, with a scroll bar that turns in all four directions and it has a right/left click button, plus 1 button on each side.

Right?

PHE4R my Scroll Ball! :D

Essentially, it seems you are correct.

But to the apple community, going from that Apple produced 1 button mouse to an Apple produced multi-button mouse is quite a culture shift, I would think.

It's pretty and all, but I would be happy if a mouse manufacturere would simply produce a multi-button mouse (wired or wireless) with the ergonomics of a Logitech MouseMan, but with the dual sensors under the fingertip section rather than the center of the mouses "belly".

I prefer a mouse to do selecting, editing and so-on in Photoshop, and I have failed to find a modern mouse with the sensors "up front" where they used to be with the "ball" mice. It is sooooo much easier to control minute mouse movements with the sensors under the fingers.

Couldn't tell from the Apple site where the sensors were located underneath.

Edit:

designmouseoptical20050802.jpg

Apparently I need to keep waiting. :huh:

Edited by Fogtripper

Once it becomes BT it will be mine, oh yes...it will be mine...

Meh, only if it was wireless. I just picked up this mouse from Microsoft: http://www.amazon.com/gp/product/images/B0...2&s=electronics

I can't go back to wired now pinch.gif

I had that mouse, it's wayyyyy to small for adult sized hands ( at least mine ), I sold it and bought a logitech v200, a goo amount bigger and prob gets way better battery life...

You click just like a normal mouse. The hardware inside just senses what click to perform, left or right.

586316521[/snapback]

wrong...u dont press down, so technicallty u have to LIFT UP and then press down for a click. where as for a normal mouse ur finger is resting, u just press down.

and since its touch sensitive i bet itll be less accurate to presses than a normal one

I've got mine here and to put this to rest:

You put your finger on whichever side you want to press, LEFT or RIGHT, then CLICK down like current apple mice.

If you rest two fingers on both sides it defaults to a LEFT click. There fore you have to lift the LEFT finger to right click, but not visa-versa.

Has anyone actually tried this thing personally?

586322830[/snapback]

That's what I would like to know. By reading this thread you would think this thing jumps on your lap and...well, be better than sliced bread.

New technology can be cool and all, but the thing just doesn't sound appealing to me. I like a mouse button to have a click, even if it is a small one to let me know it has clicked. I like scroll wheels (at least the one on my Logitech) that move, rather than sliding my finger over top of a surface or tiny ball. I like my mouse to conform to my hand and not feel like a bar of soap.

Like I mentioned above, the only thing that would make me migrate to a different mouse is if a manufacturer created one with the features of a MouseMan, but had the sensors moved forward to the fingertip section.

Is the new Mac Mouse better than the bar'o soap or the "hockey puck"? Has to be. Is it more comfortable to use than what is already out there? I'll wait till we get some impartial reviews of users in here. :yes:

I've got mine here and to put this to rest:

You put your finger on whichever side you want to press, LEFT or RIGHT, then CLICK down like current apple mice.

If you rest two fingers on both sides it defaults to a LEFT click. There fore you have to lift the LEFT finger to right click, but not visa-versa.

586324459[/snapback]

So the whole body clicks down as the stock mouse does?

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

Decaff is your friend. :sleep:

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

That's not true. You should read the posts above you.

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

The mouse senses which side your finger is on, thats all. You push down like on current one click mice. To do a right click YOU HAVE TO lift your finger off the left side, otherwise it will register a default LEFT click. I'm sitting here with it...

IT DOES NOT register what side you are asserting pressure on. Those are for the 3rd and 4th buttons only. The top two buttons do not use pressure sensors, but TOUCH sensors.

That's alright about the right-clicking issue. I usually lift my fingers anyway since I don't attempt to click while holding the left finger down - kind of like not keeping the brake pedal down while trying to accelerate? (ok that's not the same thing...).

My Mouse came today but I'm at uni. I couldn't get it yesterday because I was at uni while they tried to deliver it. Hope it arrives when I get home.

That's alright about the right-clicking issue. I usually lift my fingers anyway since I don't attempt to click while holding the left finger down - kind of like not keeping the brake pedal down while trying to accelerate? (ok that's not the same thing...).

My Mouse came today but I'm at uni. I couldn't get it yesterday because I was at uni while they tried to deliver it. Hope it arrives when I get home.

I still think it's cool looking. I hope you enjoy the mouse once you get to use it.

I'm a trackball user, so I guess that little scroll ball thing makes sense to me. I'm looking forward to trying one out just for fun.

yepp exactly. lets be clear.. YOU CANNOT right click if your finger is resting on the left click sensor

586326028[/snapback]

That's not exactly true. An excerpt from the Ars review:

Some readers have brought up the question of whether you are able to right-click while still physically touching the left side of the mouse. The answer to that question is "sort of." As it turns out, the top part of the shell is touch sensitive to a point, which was not immediately obvious to me upon first blush. I tested right-clicking with varying degrees of skin contact on the left side of the mouse and you can't be touching it "too much" on the left side before the right click gives up and you're now left clicking. Of course, the mouse works most predictably when you hover your index finger (if you are right-handed) above the mouse as you right-click with your middle or ring fingers, which is apparently what I do naturally but some other users do not. The line at which the threshold is drawn is rather blurry and it's hard to really know exactly how much touching is too much. The only clear solution I have for this is to recommend going down to an Apple Store in person to try it out and determine whether your subtle mousing habits will make this work for you or not.

It's clear you CAN be touching with both fingers. The weight/amount of touch is the question.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I agree, especially if it is cloud sourced, like this one is.. but I wouldn't say no to a local AI assistant similar to the Zettlab one which would be really helpful with my large Photos library, but also to perform tasks like installing Docker apps rather than me having to do it via Docker Compose, but I don't think we're quite there yet. Synology Photos is somewhat AI, you can ask it to search for certain people (if you have tagged them and it will attempt to match similar photos to the person) and if you put a search term in for "cars" for example, it will show you all photos with a car.
    • I doubt that Google will keep the same price... it may go up from that list published.
    • Sennheiser's audiophile grade HD 600 hits lowest ever price on Amazon Prime Day 2026 by Sayan Sen If you are in the market for high-quality audiophile-grade over-ear headphones then Sennheiser's HD 600 are a great choice for sure, especially today on Prime Day 2026 as the product has hit its lowest ever price (purchase link under the specs table down below). The Sennheiser HD 600 has long been regarded as a reference headphone for listeners seeking a detailed and natural listening experience. It is an open-back design that is built around the idea of acoustic transparency which is essentially said to allow sound waves to move freely for a more spacious and accurate presentation by reducing turbulence and the type of distortion that can result from it. At the heart of the product is Sennheiser’s proprietary driver system featuring a 42 mm driver paired with a lightweight diaphragm and aluminum voice coils. The company says this design helps deliver fast response times and better articulate sound across the audible frequency range. Comfort and durability are also key aspects of the HD 600 as the headphones feature soft velour ear pads designed for extended listening sessions. The HD 600 comes with a detachable 3-meter cable, a 6.3 mm stereo connector, and a 3.5 mm adapter for compatibility with a wide range of audio equipment. The technical specs of the Sennheiser HD 600 are given in the table below: Specification Value Transducer Principle Dynamic, Open-Back Ear Coupling Circumaural (Over-Ear) Frequency Response 12 Hz – 40,500 Hz Sound Pressure Level (SPL) 97 dB (1 V) Impedance 300 Ω Total Harmonic Distortion (THD) < 0.1% (1 kHz, 1 V) Cable Length 3 m (9.8 ft) Connector 3.5 mm Stereo Jack Plug Included Adapter 6.3 mm (1/4") Stereo Jack Adapter Weight 260 g Magnetic Field Strength 1.8 mT Driver Size 42 mm Dynamic Driver Diaphragm Size 38 mm Get it at the link below: Sennheiser HD 600: $237.00 (Sold by Electronics Expo, Shipped by Amazon US) (Was: $449.95) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases
    • So the card is targeted at headphone users - so the review should be from someone that uses this - maybe I can review a card next time.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      88
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!