Mighty Mouse


Recommended Posts

Let me get this straight;

It's an optical mouse, with a scroll bar that turns in all four directions and it has a right/left click button, plus 1 button on each side.

Right?

PHE4R my Scroll Ball! :D

Essentially, it seems you are correct.

But to the apple community, going from that Apple produced 1 button mouse to an Apple produced multi-button mouse is quite a culture shift, I would think.

It's pretty and all, but I would be happy if a mouse manufacturere would simply produce a multi-button mouse (wired or wireless) with the ergonomics of a Logitech MouseMan, but with the dual sensors under the fingertip section rather than the center of the mouses "belly".

I prefer a mouse to do selecting, editing and so-on in Photoshop, and I have failed to find a modern mouse with the sensors "up front" where they used to be with the "ball" mice. It is sooooo much easier to control minute mouse movements with the sensors under the fingers.

Couldn't tell from the Apple site where the sensors were located underneath.

Edit:

designmouseoptical20050802.jpg

Apparently I need to keep waiting. :huh:

Edited by Fogtripper

Once it becomes BT it will be mine, oh yes...it will be mine...

Meh, only if it was wireless. I just picked up this mouse from Microsoft: http://www.amazon.com/gp/product/images/B0...2&s=electronics

I can't go back to wired now pinch.gif

I had that mouse, it's wayyyyy to small for adult sized hands ( at least mine ), I sold it and bought a logitech v200, a goo amount bigger and prob gets way better battery life...

You click just like a normal mouse. The hardware inside just senses what click to perform, left or right.

586316521[/snapback]

wrong...u dont press down, so technicallty u have to LIFT UP and then press down for a click. where as for a normal mouse ur finger is resting, u just press down.

and since its touch sensitive i bet itll be less accurate to presses than a normal one

I've got mine here and to put this to rest:

You put your finger on whichever side you want to press, LEFT or RIGHT, then CLICK down like current apple mice.

If you rest two fingers on both sides it defaults to a LEFT click. There fore you have to lift the LEFT finger to right click, but not visa-versa.

Has anyone actually tried this thing personally?

586322830[/snapback]

That's what I would like to know. By reading this thread you would think this thing jumps on your lap and...well, be better than sliced bread.

New technology can be cool and all, but the thing just doesn't sound appealing to me. I like a mouse button to have a click, even if it is a small one to let me know it has clicked. I like scroll wheels (at least the one on my Logitech) that move, rather than sliding my finger over top of a surface or tiny ball. I like my mouse to conform to my hand and not feel like a bar of soap.

Like I mentioned above, the only thing that would make me migrate to a different mouse is if a manufacturer created one with the features of a MouseMan, but had the sensors moved forward to the fingertip section.

Is the new Mac Mouse better than the bar'o soap or the "hockey puck"? Has to be. Is it more comfortable to use than what is already out there? I'll wait till we get some impartial reviews of users in here. :yes:

I've got mine here and to put this to rest:

You put your finger on whichever side you want to press, LEFT or RIGHT, then CLICK down like current apple mice.

If you rest two fingers on both sides it defaults to a LEFT click. There fore you have to lift the LEFT finger to right click, but not visa-versa.

586324459[/snapback]

So the whole body clicks down as the stock mouse does?

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

Decaff is your friend. :sleep:

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

That's not true. You should read the posts above you.

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

The mouse senses which side your finger is on, thats all. You push down like on current one click mice. To do a right click YOU HAVE TO lift your finger off the left side, otherwise it will register a default LEFT click. I'm sitting here with it...

IT DOES NOT register what side you are asserting pressure on. Those are for the 3rd and 4th buttons only. The top two buttons do not use pressure sensors, but TOUCH sensors.

That's alright about the right-clicking issue. I usually lift my fingers anyway since I don't attempt to click while holding the left finger down - kind of like not keeping the brake pedal down while trying to accelerate? (ok that's not the same thing...).

My Mouse came today but I'm at uni. I couldn't get it yesterday because I was at uni while they tried to deliver it. Hope it arrives when I get home.

That's alright about the right-clicking issue. I usually lift my fingers anyway since I don't attempt to click while holding the left finger down - kind of like not keeping the brake pedal down while trying to accelerate? (ok that's not the same thing...).

My Mouse came today but I'm at uni. I couldn't get it yesterday because I was at uni while they tried to deliver it. Hope it arrives when I get home.

I still think it's cool looking. I hope you enjoy the mouse once you get to use it.

I'm a trackball user, so I guess that little scroll ball thing makes sense to me. I'm looking forward to trying one out just for fun.

yepp exactly. lets be clear.. YOU CANNOT right click if your finger is resting on the left click sensor

586326028[/snapback]

That's not exactly true. An excerpt from the Ars review:

Some readers have brought up the question of whether you are able to right-click while still physically touching the left side of the mouse. The answer to that question is "sort of." As it turns out, the top part of the shell is touch sensitive to a point, which was not immediately obvious to me upon first blush. I tested right-clicking with varying degrees of skin contact on the left side of the mouse and you can't be touching it "too much" on the left side before the right click gives up and you're now left clicking. Of course, the mouse works most predictably when you hover your index finger (if you are right-handed) above the mouse as you right-click with your middle or ring fingers, which is apparently what I do naturally but some other users do not. The line at which the threshold is drawn is rather blurry and it's hard to really know exactly how much touching is too much. The only clear solution I have for this is to recommend going down to an Apple Store in person to try it out and determine whether your subtle mousing habits will make this work for you or not.

It's clear you CAN be touching with both fingers. The weight/amount of touch is the question.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • UK funds £60M AI labs to challenge US tech dominance with open-source models by Paul Hill The UK government has awarded £60 million to Oxford University and University College London to help keep the country in the AI race by focusing on open-source, low-hardware alternatives. This is in stark contrast to the expensive, closed-source, and high-hardware-requirement models being created in the United States and elsewhere. The money will be shared among two new academic research labs over six years to help them redesign the fundamental mathematics and architectures of AI to help the UK reduce its reliance on a handful of US tech firms. Commenting on the development, AI Minister Kanishka Narayan said: Initially, the government planned to fund just one lab with a £40 million investment, but with this update, two labs will now get access to a larger pool of funds. The labs are expected to invest in the top AI researchers at every career stage, with £2 million per lab being set aside for hiring at least ten doctoral students. The government hopes that this will grow the UK’s talent in the field of AI. The labs are also expected to work closely with the leaders in British AI research, such as the Alan Turing Institute and UKRI’s AI research hubs. This will allow the various teams to collaborate and create new solutions faster than they could alone. This development is pretty interesting for a number of reasons, chiefly that it could create a long-term challenge for US tech firms if these labs successfully scale these open-source architectures that bypass the proprietary ecosystems. It could also give British businesses and public sector organizations access to AI features without paying high licensing fees to foreign providers or needing to invest in specialized server infrastructure.
    • If I were them, I'm gonna hold out until the prices of these semiconductor parts normalize. $1,049 for a ~5 year old hardware is DoA, more so for gamers. On a deeper note, if Steam Machine is priced like this, we are soo effed up for the next gen Xbox console and PS6. With great AAA titles releasing at the end of the year, this just creates more demand...and more tears for me. Lol.
    • I suspect one reason its hard to justify subsidising is that it's not a locked down device like a traditional console is. In this climate sadly if it was a "good deal" you'd get people hoarding them for anything but gaming. The Lenovo Legion Go 2 with the Ryzen Z2 Extreme is £1300 here ($1720) for some context on how other SteamOS like devices are now priced. I got the older Z1 Extreme model for £300 with a dock, just shows how insane prices have got recently.
    • If you have an account with any of Meta's services, you technically have an account with all of their services. You may not use it, but it exists.
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      456
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      94
    4. 4
      Michael Scrip
      87
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!