Mighty Mouse


Recommended Posts

Let me get this straight;

It's an optical mouse, with a scroll bar that turns in all four directions and it has a right/left click button, plus 1 button on each side.

Right?

PHE4R my Scroll Ball! :D

Essentially, it seems you are correct.

But to the apple community, going from that Apple produced 1 button mouse to an Apple produced multi-button mouse is quite a culture shift, I would think.

It's pretty and all, but I would be happy if a mouse manufacturere would simply produce a multi-button mouse (wired or wireless) with the ergonomics of a Logitech MouseMan, but with the dual sensors under the fingertip section rather than the center of the mouses "belly".

I prefer a mouse to do selecting, editing and so-on in Photoshop, and I have failed to find a modern mouse with the sensors "up front" where they used to be with the "ball" mice. It is sooooo much easier to control minute mouse movements with the sensors under the fingers.

Couldn't tell from the Apple site where the sensors were located underneath.

Edit:

designmouseoptical20050802.jpg

Apparently I need to keep waiting. :huh:

Edited by Fogtripper

Once it becomes BT it will be mine, oh yes...it will be mine...

Meh, only if it was wireless. I just picked up this mouse from Microsoft: http://www.amazon.com/gp/product/images/B0...2&s=electronics

I can't go back to wired now pinch.gif

I had that mouse, it's wayyyyy to small for adult sized hands ( at least mine ), I sold it and bought a logitech v200, a goo amount bigger and prob gets way better battery life...

You click just like a normal mouse. The hardware inside just senses what click to perform, left or right.

586316521[/snapback]

wrong...u dont press down, so technicallty u have to LIFT UP and then press down for a click. where as for a normal mouse ur finger is resting, u just press down.

and since its touch sensitive i bet itll be less accurate to presses than a normal one

I've got mine here and to put this to rest:

You put your finger on whichever side you want to press, LEFT or RIGHT, then CLICK down like current apple mice.

If you rest two fingers on both sides it defaults to a LEFT click. There fore you have to lift the LEFT finger to right click, but not visa-versa.

Has anyone actually tried this thing personally?

586322830[/snapback]

That's what I would like to know. By reading this thread you would think this thing jumps on your lap and...well, be better than sliced bread.

New technology can be cool and all, but the thing just doesn't sound appealing to me. I like a mouse button to have a click, even if it is a small one to let me know it has clicked. I like scroll wheels (at least the one on my Logitech) that move, rather than sliding my finger over top of a surface or tiny ball. I like my mouse to conform to my hand and not feel like a bar of soap.

Like I mentioned above, the only thing that would make me migrate to a different mouse is if a manufacturer created one with the features of a MouseMan, but had the sensors moved forward to the fingertip section.

Is the new Mac Mouse better than the bar'o soap or the "hockey puck"? Has to be. Is it more comfortable to use than what is already out there? I'll wait till we get some impartial reviews of users in here. :yes:

I've got mine here and to put this to rest:

You put your finger on whichever side you want to press, LEFT or RIGHT, then CLICK down like current apple mice.

If you rest two fingers on both sides it defaults to a LEFT click. There fore you have to lift the LEFT finger to right click, but not visa-versa.

586324459[/snapback]

So the whole body clicks down as the stock mouse does?

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

Decaff is your friend. :sleep:

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

That's not true. You should read the posts above you.

you idiots it just senses which side of the mouse button has been clicked. this is to keep the style of a one button mouse, but the ability to just use it exactly like a two button mouse. you dont have to lift your fingers up but merely it detects which side you have pressed down. before you click it detects nothing, because no pressure has been used to click.

586324975[/snapback]

The mouse senses which side your finger is on, thats all. You push down like on current one click mice. To do a right click YOU HAVE TO lift your finger off the left side, otherwise it will register a default LEFT click. I'm sitting here with it...

IT DOES NOT register what side you are asserting pressure on. Those are for the 3rd and 4th buttons only. The top two buttons do not use pressure sensors, but TOUCH sensors.

That's alright about the right-clicking issue. I usually lift my fingers anyway since I don't attempt to click while holding the left finger down - kind of like not keeping the brake pedal down while trying to accelerate? (ok that's not the same thing...).

My Mouse came today but I'm at uni. I couldn't get it yesterday because I was at uni while they tried to deliver it. Hope it arrives when I get home.

That's alright about the right-clicking issue. I usually lift my fingers anyway since I don't attempt to click while holding the left finger down - kind of like not keeping the brake pedal down while trying to accelerate? (ok that's not the same thing...).

My Mouse came today but I'm at uni. I couldn't get it yesterday because I was at uni while they tried to deliver it. Hope it arrives when I get home.

I still think it's cool looking. I hope you enjoy the mouse once you get to use it.

I'm a trackball user, so I guess that little scroll ball thing makes sense to me. I'm looking forward to trying one out just for fun.

yepp exactly. lets be clear.. YOU CANNOT right click if your finger is resting on the left click sensor

586326028[/snapback]

That's not exactly true. An excerpt from the Ars review:

Some readers have brought up the question of whether you are able to right-click while still physically touching the left side of the mouse. The answer to that question is "sort of." As it turns out, the top part of the shell is touch sensitive to a point, which was not immediately obvious to me upon first blush. I tested right-clicking with varying degrees of skin contact on the left side of the mouse and you can't be touching it "too much" on the left side before the right click gives up and you're now left clicking. Of course, the mouse works most predictably when you hover your index finger (if you are right-handed) above the mouse as you right-click with your middle or ring fingers, which is apparently what I do naturally but some other users do not. The line at which the threshold is drawn is rather blurry and it's hard to really know exactly how much touching is too much. The only clear solution I have for this is to recommend going down to an Apple Store in person to try it out and determine whether your subtle mousing habits will make this work for you or not.

It's clear you CAN be touching with both fingers. The weight/amount of touch is the question.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft adds new AI study and teaching tools for free to Microsoft 365 Education by Karthik Mudaliar Microsoft is expanding its footprint into the classroom with a new suite of AI-powered study and teaching tools for Microsoft 365 Education. Rather than pushing these features as premium add-ons, the company is rolling out many core features at no additional cost to existing customers. The update brings new tools such as 'Copilot Notebooks' and 'Study and Learn Agents' into Microsoft's Education suite. Copilot Notebooks is essentially an AI-powered workspace where students can ground answers with their own learning materials, similar to Google's NotebookLM. The study and learning agents would allow students to learn concepts more visually, along with interactive practices and real-time feedback. For the last few years, educational institutions have struggled to implement practical guardrails for the usage of large language models. The new tools from Microsoft are a push towards providing those guardrails natively within the apps that the students and teachers already use every day. For teachers, the new 'Unit Plans' within the dedicated 'Teach' agent would allow them to rapidly generate structured curriculum frameworks grounded in established learning science, cutting down hours of preliminary lesson planning. Microsoft is also introducing 'Learning Groups' in Assignments that would help educators automatically categorize students based on performance data. With 'Learning Zones', teachers can then tailor assignments to different comprehension levels. It should be noted that Microsoft is making Learning Zone accessible for a one-year trial across all Windows 11 devices, while quietly incentivizing school districts to upgrade their legacy hardware and lock further into the Windows ecosystem. Of course, Microsoft is doing this as part of a broader ambition. Just last year, the company made waves when it brought its 365 Copilot to the education sector for $18 a month, introducing premium tiers with standalone conversational agents. However, gating all AI features behind a per-user subscription left a massive gap of students without access to official, school-sanctioned AI tools. Now that the features are inside the base Microsoft 365 Education suite for free, the company is effectively subsidizing the AI training of its next generation of power users. Microsoft’s own data, released alongside these tools in its 2026 AI in Education Report, indicates that while over 90% of students are using AI, nearly 80% lack formal training. Lastly, Microsoft is also expanding its "Elevate for Educators" training program, developed in partnership with organizations like ISTE and ASCD. This ensures that the teachers tasked with policing and guiding this new technology actually understand how to use it themselves.
    • Mexicans do not like their spices to be used in crap. Also their food is quite delicious.
    • Nah. It has/had it's quirks that are either usual for every Windows version or a non-issue, like its easily bypassable requirements, raw launch state, broken updates and inclusion of AI, but past that, it's received tons of improvements especially in the last couple years, and we're now looking forward to 26H2 and the K2 program with a ton of QoL improvements, so it's clearly upwards.
  • Recent Achievements

    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
    • One Month Later
      Tom Schmidt earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      450
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      123
    4. 4
      Michael Scrip
      84
    5. 5
      Xenon
      75
  • Tell a friend

    Love Neowin? Tell a friend!