OMG, I got a warning! Now what?


Recommended Posts

I thought calling people a "fanboy" was against rules. I got warnings for doing so years ago but I see people do it all the time. Their posts are not removed and nothing is done about it. One of my biggest gripes with Neowin is the inconsistency with warnings and how certain things are handled.

I thought it was as well, but with the rate a lot of people keep throwing that around, I would have to suspect it isn't. There is a inconsistency problem, but I think the bigger problem is that each sub forum has it's own rules. In the news sub forum, you can't rag on any channel with silly names, but it seems that in the gamers forum you can. You can't personally attack anyone with insults, unless its in a religious thread, then it is done all the time.

I've learned from my mistakes in each different sub forum, but honestly, it is a little hard to remember what is acceptable, especially some of the silly, yet well meant rules, like the media one and not calling the channels by silly names. ( though I have that one memorized as I learned from my mistake :p )

I thought calling people a "fanboy" was against rules. I got warnings for doing so years ago but I see people do it all the time. Their posts are not removed and nothing is done about it. One of my biggest gripes with Neowin is the inconsistency with warnings and how certain things are handled.

Just using your particular example over the word "fanboy", I could quite easily understand why you feel as if the moderation is inconsistent. The problem really stems from a lack of understanding of what we're trying to achieve. To give an example, calling a specific individual a fanboy is not something we'd want to say happening (e.g. Oh my god, I can't believe you, you're such a fan boy). Equally, we wouldn't want veiled use of the word toward an individual either (e.g. responding to a comment with: "I see the fanboys are out in force again.... *roll eyes*"). Where we WOULD consider it acceptable use is in a very generalised manner that isn't directed at a particular neowin member (e.g. My friend really doesn't like my XBox, he's such a fanboy).

It's swings and roundabouts, and I can see why you feel as if the moderation is inconsistent, but all we're really trying to do is stop people from slinging insults at each other, or trying to do so with a thinly guarded veil.

  • 3 weeks later...

I thought calling people a "fanboy" was against rules. I got warnings for doing so years ago but I see people do it all the time. Their posts are not removed and nothing is done about it. One of my biggest gripes with Neowin is the inconsistency with warnings and how certain things are handled.

The staff cannot read every post in every thread. We often rely on threads being reported by our members.

  • 8 months later...

Yeah, contact a moderator to have them review your account.

Since this thread has been temporarily revived, does anyone know how we check our warning level? It used to be that there was a bar on our user profiles - even when at 0% - but that has disappeared now. Is that just because I have a 0% warning level, or is it because they've changed the way to check your warning level?

I don't think I have anything to be worried about, but it's always good to know. :)

If you never get a 'Warning', you are doing something wrong. ;)

Haha, yeah, I've gotten a warning 2 or 3 times in the past. Sometimes it's worth it to call someone out for being a moron, haha.

  • Like 1

Since this thread has been temporarily revived, does anyone know how we check our warning level? It used to be that there was a bar on our user profiles - even when at 0% - but that has disappeared now. Is that just because I have a 0% warning level, or is it because they've changed the way to check your warning level?

I don't think I have anything to be worried about, but it's always good to know. :)

Seems they have disabled the system, else there would be a warn bar on your own posts and profile.

I can't manually access it through URL either (gives an error).

I've never had a warning as far as I know, but i sort of wish I had. I'd much rather a warning and explanation than my post just being deleted with no clue as to why.

To the OP: as others have suggested, it's best to contact a mod anytime something goes awry and you didn't intend it. (Y)

Yeah, contact a moderator to have them review your account.

Since this thread has been temporarily revived, does anyone know how we check our warning level? It used to be that there was a bar on our user profiles - even when at 0% - but that has disappeared now. Is that just because I have a 0% warning level, or is it because they've changed the way to check your warning level?

I don't think I have anything to be worried about, but it's always good to know. :)

I am pretty sure, I am above 0%, but I don't see it either

Could those who think they have warnings check their profiles to see if it's listed somewhere? If memory serves me correctly, some time ago it was removed from being shown on all your posts to yourself.

edit: it is in your profile: https://www.neowin.net/forum/topic/865100-poll-move-post-count-to-profiles-only/

Could those who think they have warnings check their profiles to see if it's listed somewhere? If memory serves me correctly, some time ago it was removed from being shown on all your posts to yourself.

edit: it is in your profile: http://www.neowin.ne...-profiles-only/

Not showing up.

Could those who think they have warnings check their profiles to see if it's listed somewhere? If memory serves me correctly, some time ago it was removed from being shown on all your posts to yourself.

edit: it is in your profile: http://www.neowin.ne...-profiles-only/

Where does it show warnings?

I'm sure I've had one before, do they expire?

where does it show if you have gotten a warning?

Not showing up.

Where does it show warnings?

I'm sure I've had one before, do they expire?

Is your warning level displayed in your profile? It used to be. It also used to be displayed underneath your member details in your posts, but I think that was removed during the 2010 upgrade.

I can't access my warn log by direct URL, so they have probably disabled this setting:

Allow all other non-protected groups to see their own warn level and reasons

(Under System->System Settings->Members->Warning and Moderation)

As long as that's in effect it won't show anywhere.

Heck,

I don't even know what my level is anymore. Didn't it used to show up all the time to the user? I WAS up to 80% at one time. I DO remember getting 2 reductions a LONG time ago, so should be at 40% or lower.

Edit:

No warning is showing up for me. Am I at 0% now then, and if so.............. :woot: :jump:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Funny, but I didn't had the issue. All PC's at work are Dell and we had the culprit version of Support Assist for about 2 weeks until we got the new one. No problem at all. And for checking you can also use Dell Command Update, no need to search in windows settings. Just check the Upgrade History.
    • YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    • Apple are scared of their customers! They have built a brand over the years of "it just works out of the box", but that slows innovation. Samsung's master stroke was the Galaxy Ultra: "Let's cram everything into one handset, make it so stupid only real nerds will love it, some of the features will work, some won't, but the audience will have such a high tolerance they won't care". Apple has no such device and so they are constantly worrying these days about the fallout of creating a new experience that customers might not like. I know it is often cited the reason they don't build a touchscreen Mac Book is they don't want to cannibalise the the iPad market, but I think it's equally cold feet after the criticism Microsoft receive trying to make a touch compatible desktop OS
    • HandBrake 1.11.2 by Razvan Serea HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows. Handbrake can process most common multimedia files and any DVD or BluRay sources that do not contain any kind of copy protection. Here is a detailed breakdown of HandBrake’s features: Built-in Device Presets—Get started with HandBrake in seconds by choosing a profile optimized for your device, or choose a universal profile for standard or high quality conversions. Simple, easy, fast. For those that want more choice, tweak many basic and advanced options to improve your encodes. Supported Input Sources—Handbrake can process most common multimedia files and any DVD or Blu-ray sources that do not contain any kind of copy protection. Outputs: File Containers: .MP4(.M4V) and .MKV Video Encoders: H.265 (x265 and QuickSync), H.264(x264 and QuickSync), H.265 MPEG-4 and MPEG-2, VP8 and Theora Audio Encoders: AAC / HE-AAC, MP3, Flac, AC3, or Vorbis Audio Pass-thru: AC-3, E-AC3, DTS, DTS-HD, TrueHD, AAC and MP3 tracks Additional features: Title/ Chapter Selection Queue up Multiple Encodes Chapter Markers Subtitles (VobSub, Closed Captions CEA-608, SSA, SRT) Constant Quality or Average BitRate Video Encoding Support for VFR, CFR and VFR Video Filters—Deinterlacing, Decomb, Detelecine, Deblock, Grayscale, Cropping and Scaling Live Video Preview HandBrake 1.11.2 changelog: All platforms Video Fixed a crash that happened when doing a 2-pass lossless x265 encode Fixed a memory leak that happened when doing a 2-pass MPEG-4/MPEG-2/VP9/FFV1 encode Audio Updated the list of supported dithers and encoders combinations Fixed the Core Audio AAC encoder 7.1 channel layout Subtitles Fixed the VobSub palette creation in the MP4 container Build system Improved build system compatibility with older build tools Third-party libraries FFmpeg 8.0.2 (decoding and filters) SVT-AV1 4.1.0 (AV1 video encoding) Linux Added WebM MIME type to the list of the supported formats Mac Improved handling of unsupported presets Updated Sparkle automatic update library Windows Improved handling of unsupported presets Improved queue low space pause behaviour Fixed the automatic audio track name generation Fixed the summary description of HDR video Download: HandBrake 64-bit | Portable 64-bit | ~30.0 (Open Source) Download: HandBrake ARM64 | Portable Links: HandBrake Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • So, an article that has nothing to do with Windows 11, still gets Windows 11 in the title and a build number as the picture? Dell have a buggy build of Support Assist HP have UEFI settings that need unlocking for the secureboot cert upgrade to take place.
  • Recent Achievements

    • One Month Later
      DJC50PLUS earned a badge
      One Month Later
    • Week One Done
      DJC50PLUS earned a badge
      Week One Done
    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      493
    2. 2
      PsYcHoKiLLa
      243
    3. 3
      Steven P.
      72
    4. 4
      neufuse
      67
    5. 5
      ATLien_0
      67
  • Tell a friend

    Love Neowin? Tell a friend!