[Official] Forza Motorsports 2 Discussion


Recommended Posts

i found a nice little tutorial for those of you wanting to make designs for your cars. i think i'll try it out when i get home. it covers the basics, and it should help a lot of you get started.

http://forums.forzamotorsport.net/forums/thread/213264.aspx

i found a nice little tutorial for those of you wanting to make designs for your cars. i think i'll try it out when i get home. it covers the basics, and it should help a lot of you get started.

http://forums.forzamotorsport.net/forums/thread/213264.aspx

That is some insane skill. Props to that guy!

racing with american cars anyone? any tips on handling?

Look for front wheel drive or all wheel drive cars. You lose a bit of power, but gain some handling. I just built a Subaru with my first decent paint job (pictures turned out too dark, so I have to retake them later) and it took a few hours to tweak it just right. I still don't have it as good as Larry's boy, Martin, claims to have it (6.2 accel, 4.7 handling), but I'm just hoping he misquoted his specs, because keeping it in class B, the best I was able to do was 6.1 and 4.4 respectively. However, getting back on point, I only have a top speed rating of 5.8, but top speed should be the last thing you worry about. Think about it. How many times do you even break 150mph? Not that often. You want to be quick out of the turns and the rest can be dedicated to improving your handling.

Look for front wheel drive or all wheel drive cars. You lose a bit of power, but gain some handling. I just built a Subaru with my first decent paint job (pictures turned out too dark, so I have to retake them later) and it took a few hours to tweak it just right. I still don't have it as good as Larry's boy, Martin, claims to have it (6.2 accel, 4.7 handling), but I'm just hoping he misquoted his specs, because keeping it in class B, the best I was able to do was 6.1 and 4.4 respectively. However, getting back on point, I only have a top speed rating of 5.8, but top speed should be the last thing you worry about. Think about it. How many times do you even break 150mph? Not that often. You want to be quick out of the turns and the rest can be dedicated to improving your handling.

Like I said, he has the guide, and like he said, he has way to much time to play. Way to much. LOL

He is supposed to come over either tomorrow night and or Saturday, and show me all of the tricks to tuning.

That does not mean I will get it, but he is going to show me, so I will pass along whatever I learn if I do learn anything.

He did mention to me the big key is the upgrades that a person buys, so I believe his specs 100%.

He is seriously the type of person that once he gets it in his head to master a game or an aspect of a game, he does not stop until he does it.

For example the first two months of Gears of War, he was unemployed, and dedicated way, way to many hours to playing it and maintained a rank that kept him in the Top 100 out of everyone playing Ranked Games, Top 50 for the first month. He was getting recruited by pro gaming leagues and the whole nine. He is just one of those people that when he puts his mind to it, he learns everything about a game possible. Then he will not play any games for months at a time, Just really odd. :wacko:

The point is I do think whatever specs he gave you were 100% legit. He is right now obsessed with the game.

Also got the game. It's brilliant!!

One thing I can't figure out is: How do I clone vinyl's from one side of a car to the other side? I am pretty sure I saw this option some where but I can't, for life of me, find it.

Go to the other side of the car and hit A on an empty box. On the menu that pops up, towards the bottom, is the option to copy the vinyls over.

ummm.. so how do I export this to the net? I don't get it.. what do I do?

Take a photo and save it. After you save it, it will ask if you wish to upload to the official forza website. Then you just go to the website and grab the image file.

Take a photo and save it. After you save it, it will ask if you wish to upload to the official forza website. Then you just go to the website and grab the image file.

hmmm.. well ok, here's the thing, I don't think I uploaded it, is there a way so I can upload my saved pics?

Look for front wheel drive or all wheel drive cars. You lose a bit of power, but gain some handling. I just built a Subaru with my first decent paint job (pictures turned out too dark, so I have to retake them later) and it took a few hours to tweak it just right. I still don't have it as good as Larry's boy, Martin, claims to have it (6.2 accel, 4.7 handling), but I'm just hoping he misquoted his specs, because keeping it in class B, the best I was able to do was 6.1 and 4.4 respectively. However, getting back on point, I only have a top speed rating of 5.8, but top speed should be the last thing you worry about. Think about it. How many times do you even break 150mph? Not that often. You want to be quick out of the turns and the rest can be dedicated to improving your handling.

right, but i'm really keen on racing with the RWD V8's, and those are a pain on the track in this game. not that i'm a pro or anything, but my Caprice used to handle herself much better while road racing back in the day. i'm thinking they kinda exaggerated the characteristics here?

Im just addicted to the paint shop mode. Update :blush:

Really, really nice no doubt. (Y)

Great job on the whole thing. Simple yet extremely well done. That 8 Ball is really sweet.

Damn, now I am going to waste hours upon hours in this vinyl editor this weekend.

I have drawn myself way to many times just using simple shapes, so my DL character (which my main "simple" version I do is in my Avatar that I made using simple shapes in Adobe Illustrator) is going to be somewhere on my car this weekend!

Does anyone else have a problem with entering the code you get with the LCE to get the free cars? My code has a "-" after the first two numbers and when I enter the code it doesn't put the "-" where it should be and thus the code is invalid :/

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Opinion. All you did was blame Democrats for everything. You offered nothing but a hit piece to support your pro Trump, anti union right wing ideology.
    • Excuse me for having an opinion, fella'... (Why am I not surprised?...) Congrats on your very informative post however...
    • By the sounds of that wall of Fox News propaganda gibberish attacking the Democratic Party you've already had plenty of "juices" flowing this morning. You've ruined what could have been a productive comment thread.
    • (Topic to get the juices flowing this Sunday morning!...) Actually, the situation has almost nothing to do with "lack of skills", especially since assembly-line skills can be taught to anyone, including Americans, certainly. Rather, the inadequacy-to-impossibility of large-scale tech manufacturing in America today, and the reasons why America finds tech manufacturing completely onerous in the 21st century, has to do with politically driven laws amid a plethora of non-scientific, utterly politicized "science-fact" that is patently false, punitive business taxation at every turn, an array of judicial fines of unimaginable scope and complexity, and, last but not least, American unionization strictures that serve to actually slay job creation and hobble all such manufacturing endeavors in America before they can get off the ground. Globalism emerged, they tell us, as the needed answer to American hubris and an unholy American drive to excel. Unless one is buried under mounds of political propaganda, it's easy to see the absurdity of labeling the employees of SpaceX, for instance, as "unskilled labor"... Etc. ad infinitum. At one time in the recent past, American manufacturing prowess was the envy of the world in a wide variety of technical fields! The current federal and state government roadblocks against America becoming competitive globally in tech manufacturing are considerable, it's true, as anyone with a working brain knows. But remarkably, that is only half the story! The other half of the story is, of course, the corporations themselves... Chinese tech manufacturing is simply unassailable in terms of profits, because the Chinese government wants to see its tech manufacturing second-to-none globally so that no companies/nations can compete in terms of ROI, and China has completely succeeded in that goal. Let's tic-off a few things: *Chinese tariff policies are set according to what is considered best for Chinese business, Chinese employees, and the Chinese people. Huge difference with how things are done with tariffs in the US--as the US government (SCOTUS in this case, Congress in others) plainly feels that tariffs are "unfair" for the limited number of citizens who may pay them, whereas nothing is "unfair" when Congress considers the Personal Income Tax rates to be infinitely hike-able, along with infinitely enlarging annual budget deficits. *The Chinese government boldly subsidizes Chinese companies to artificially amplify their profits. *The Chinese government deliberately refuses to avidly demonize Chinese businesses and does not consider Chinese businesses "the enemy", so very unlike American (D)s these days. *Chinese labor laws and businesses are allowed to set their own labor policies according to what Chinese companies consider is best for companies and their employees... Simply put, American workers in tech manufacturing are not allowed to set their own labor policies! * One additional problem corporations have that I also do not sympathize with is they don't want to pay to train their American employees. They could easily do so, but would rather not have to pay for it. I find that pathetic, actually. It is the height of hypocrisy for Americans to decry working conditions in China while simultaneously ensuring that American products are manufactured in China, not in the US, simply to maximize profits. There is nothing wrong with making a profit, of course, absolutely nothing. But there is plenty wrong with attempts to normalize hypocrisy of this kind! But rank hypocrisy and the (D) party in the US are longtime bedfellows... The current government in Washington is working overtime to see if it can toss out the horribly poor, failed economic policies of the past, while the (D)s still in Washington work very hard to bring back the stupidity whenever possible. With the right policies in place, America can be an infinitely competitive manufacturer.
  • Recent Achievements

    • Conversation Starter
      jessse3334 earned a badge
      Conversation Starter
    • Reacting Well
      JuvenileDelinquent earned a badge
      Reacting Well
    • One Month Later
      Excellence2025 earned a badge
      One Month Later
    • Week One Done
      Excellence2025 earned a badge
      Week One Done
    • Week One Done
      flexorcist earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      73
    5. 5
      FloatingFatMan
      62
  • Tell a friend

    Love Neowin? Tell a friend!