Vista Game Explorer Editor  

274 members have voted

  1. 1. How would you rate VGEE out of 10?

    • Excellent (9-10 out of 10)
      52
    • Very Good (8 out of 10)
      47
    • Good (7 out of 10)
      61
    • Not Good Enough (6 and below)
      71
    • I don't have Vista
      43


Recommended Posts

As far as I know - it's an MS bug, since the upgrade to the VGE components doesn't take into account that some people have used VGEE. E-Explorer will be much better in this regard since it will do things properly, whereas VGEE was just a front-end to speed up the process that other people on this forum worked out.

Your choices are to reformat or to create a new profile

As far as I know - it's an MS bug, since the upgrade to the VGE components doesn't take into account that some people have used VGEE. E-Explorer will be much better in this regard since it will do things properly, whereas VGEE was just a front-end to speed up the process that other people on this forum worked out.

Your choices are to reformat or to create a new profile

Thanks for the response I guess I'll just wait for E-Explorer is there one I can test?

  • 2 weeks later...

Hey guys I just installed Crysis again but this time I realized that it didn't show up in the Games Explorer... if I add it in myself, it only uses the small icon and never retrieve any info from the web. So I tried VGEE but it said it can't find any games with boxart. So how can I create a boxart for my game? And after that how can I use VGEE to change the icon, and also retrieve info of Crysis from the web if possible? Thx.

Ugh, goodness... got the same error as the last person did. I even backed up all of my games before moving to SP1 just to be safe, and now VGE isn't even letting me import those back in for some reason. I tried removing all the games from the registry manually after VGE's repair didn't work, but that only let me add one game (and it worked fine, no errors or anything). Then it said it couldn't re-add the game back for some reason, so I did it manually... and then it never worked again.

Is there any way to fix this? I've cleared everything out of the registry, as I said. I'm not going to reformat for this or go through the hassle of doing the whole account swap thing, if it doesn't work I simply won't use the Vista Games Explorer again... I was just wondering if it's possible to fix.

I'm not incredibally sure since I'm not looking at the screen to fiddle with things. I do have some good news however - my Virtual Vista PC which I'm currently coding on is refusing to show BoxArt for legacy games that I've added in this account - but E-Explorer does show the Boxart with no action from me required. So it's definately a MS problem, but one that EE won't suffer from.

  • 2 weeks later...

Didn't get any email notifs again for the last 2 posts:

@ryoran109:

Thanks to Julius, EE will go one better. When you go to enter info in for a new game, as soon as you enter in the Game Title in the first box, EE will try and search for all the other remain info online and will let you import it all and let you make any needed adjustments. Well, that's what I'm aiming for anyway. The search function already works successfully, it's just adapting it to work in the way mentioned.

@medo_sd:

EE will replace the standard Vista Game Explorer plus my currently release editor (v2.14a). It will show you all your games, allow you to launch games and other programs, sites, folders, etc and will let you edit games all within the one spot. There are also plans to allow you to add/remove/edit games in Vista's Media Centre (in case you've already noticed one or two games in there already, now you should be able to put them all there). In a later version I might try and get EE to show other things as well, like Movies, Music Albums, etc, which is why I went for the name E-Explorer (Entertainment Explorer) rather than just limiting it to a Game Explorer (plus MS already has that title). The only thing I don't really like about the name E-Explorer is that if you google it there happens to be another process similarly-named out there that is some sort of trojan. I will make sure that my executable is named differently for everyone's benefit.

My PC is not far away from being fixed - just a few weeks and my CPU (which was the faulty part all along) will be fixed, then I'll reformat the PC and build it up again and resume programming in a lot more of my spare time. (I enjoy playing games too) :)

Hey all . Thanks Ryan , the idea sounds sweet and just what i was looking for ( vgee ) to bad i can't get it to work . It installs fine , but when i go to lunch vgee i get the first time use popup , and then another that says something bout no games in the list box . I did what it sugested and still no luck . I had hell gate installed and all the info showed up fine so i know that vgm is grabbing the info online and after coming across the problem with vgmm i installed wall-e as suggested , also got the info no problem . Sure hope you can help me out with this or of corse ill have to wait for e-explorer. I also cant find any game folder ( C\program files \Games , from what i read online ) that relates to vgm if thats important . Should add i have sp1 as well as .net 3.5

capture2uu5.jpg

2 possibilities:

1 - the game has the boxart, etc included on the installation CD and isn't downloaded - so it's a 'Game for Windows' and not a legacy game (I don't know which it is).

2 - You have a bad Windows account - try make a new one to test it in

  • 3 weeks later...

Progress is very slow atm unfortunately.

I haven't heard from Julius in a while - who I believe is still settling into a new job, I'm not 100% convinced I have the latest version of the program myself, although the newer bits of code are floating around in my email inbox, but I'm slowly coding away at a few things related to the main functions of the app to make it useful. I around 2 weeks time I should get my fixed CPU back and I'll format the PC again and set everything up on it properly and get back into the coding of VGEE. Sorry about not having it finished sooner.

There's nothing around that supports editing icons (as opposed to boxart) in the VGE currently, but E-Explorer will do this (Julius assures me of that anyway). In the meantime you could always do a screen capture of the large icon and save it as a jpg and use it as BoxArt.

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

I just read through this entire thread and tried the VGEE program for myself on Vista 64. The program worked as intended and I'm happy with the results, however I have a couple questions.

1) How can I change the box art for "Games for Windows" games that do not appear in the VGEE "Load Game Information" list (e.g. Crysis, Rainbow Six Vegas 2, Call of Juarez). Vista automatically gave these games square icons instead of the traditional box art icons and I would like to change that. I've seen screenshots of the Crysis icon changed to its box art so I'm sure it is possible I'm just not sure how to do it.

2) Steam games (e.g. Half-Life 2, Counter-Strike, etc.). These games require Steam to run and so it is not possible to create a shortcut directly to the game's .exe. Instead, to launch one of these games you have to create a shortcut to Steam with a command like this: "C:\Program Files (x86)\Steam\Steam.exe" -applaunch 80 which would launch Condition Zero. Attempting to place this into VGEE's App Path textbox will result in the program crashing. I'm assuming it does not like the quotation marks, but those are necessary for the shortcut to function correctly. As a workaround, I just set the App Path in VGEE for all the Steam Games to the steam.exe, and then used the Customize option from within VGE to change the shortcut to what it should be (i.e. I added the -applaunch ## commands). This works just fine, but when I load the game's information into VGEE, it still shows the old shortcut. So any time I make a change to the game in VGEE, I will have to update the shortcut link using VGE's Customize menu. I have no problem doing that, but I'm just curious if there is a better way to do this.

3) This relates to question 2. Because games like Counter-Strike, Half-Life, and Half-Life 2 require Steam to run, the icon that shows up in the VGE when its View is set to something smaller than "Large Icons" is the Steam icon instead of the actual game's icon. Is there some way to change this? When running VGEE, the icon textbox at the very bottom is always disabled thus not allowing me to change it.

Even with these shortcomings I absolutely love this program and I am looking forward to news of E-Explorer's release

GOOD NEWS! (No I'm not going to talk about the Dacia Sandero) :)

I'm 90% sure I've pinpointed my system troubles down to a faulty HDD or Sata cable/port. With the drive disconnected the system is very stable. I now have it reconnected with a different cable and port to see if it will freeze or not. Don't ask me how a bad HDD causes a complete system freeze - I have no idea myself, but within a few weeks I'll be right back into coding with my #1 priority being to release a beta of EE this year (to think I once said it could be finished by Feb/March 08).

Thanks for holding on guys, if you can think of any cool suggestions/novelty features for the program then please post them below.

Ryan R

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • expected when they force you by having to use TPM and secure boot for anti cheat crap, and lazy developers only test on windows 11.
    • The fact I need to use "Show more" like 99% of the time is so annoying. Or why I have 7-zip under 3 submenus when it could be in top. And Microslop keeps saying how they'll improve Start and I've not seen ANY improvement yet. In MONTHS. WTF?! I'll believe any of it when they actually deliver anything.
    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      488
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!