Recommended Posts

Don't use this anymore since putting a Netgear ReadyNAS on the network. Although it doesn't transcode MKV files I try and avoid those and if I end up with them I just watch in the bedroom via my Acer Revo and XBMC.

Hey all, lately a few mkv's have been giving me issues while trying to stream them through media server. Specifically they say "Data is Corrupt" and I cannot play them at all. HIt has only been recently, and only a certain few. So does anyone know what is up? A new kind of codec perhaps? Do I have to use mkvmerge or some similar app and do something to get them to work? Up until this point in time never had any real issues with mkv files at all, so the few that did not work in the past I just did not watch. So any help here is appreciated. Is there a newer version of media server perhaps? TIA, DL

Is there an updated guide on how to stream mkv's to a PS3? Or is the OP up to date? I'm sick and tired to trying to get my 360 to play them. They're always skippy and laggy.

PS3 Media Server, and yes i know its PS3 but PS3 and xbox use the DLNA protocol for streaming so it works

Hey all, lately a few mkv's have been giving me issues while trying to stream them through media server. Specifically they say "Data is Corrupt" and I cannot play them at all. HIt has only been recently, and only a certain few. So does anyone know what is up? A new kind of codec perhaps? Do I have to use mkvmerge or some similar app and do something to get them to work? Up until this point in time never had any real issues with mkv files at all, so the few that did not work in the past I just did not watch. So any help here is appreciated. Is there a newer version of media server perhaps? TIA, DL

Install the build from here - http://ps3mediaserver.org/forum/viewtopic.php?f=14&t=8883

Install the build from here - http://ps3mediaserve...php?f=14&t=8883

Thanks AB, gonna give that a whirl today.

' timestamp='1293697852' post='593539912']

Actually I have the same problem with SOME mkv files and I am using the above build from day one!

Interesting, i will post back once I use it a few days and see, I just wish I could remember what mkv's it was, I know I deleted them. wacko.gif

Sometimes the program/computer may need to be restarted. I had a issue with Salt earlier, but a restart somehow solved it.

Hmmm, considering I leave my comp on 24/7 and have not restarted it in weeks, this could be the case. Gonna restart once I install the new build.

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

' timestamp='1293998996' post='593549926']

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

Thanks for the heads up (Y)

' timestamp='1293998996' post='593549926']

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

Thanks for the heads up (Y)

Another new build though

1.20.412-SB10:
  • Added PMSEncoder 1.3.0
  • PMSEncoder engine is applied by default and doesn't need to keep being added to PMS.conf after saves
  • Removed tsp's bugfixes since they were causing playback problems for Bravia users
  • Mac build now supports update.jar/plugins (issue 766) (if anyone wants to build it)
  • Allow pluggable engines (issue 686)
  • Fixed some code indentation
  • Language changes
  • Updated NSIS from 2.42 to 2.46

1.20.412-SB11:

  • Processes killed cleanly on non-Windows operating system (issue 680)
  • Allow custom MEncoder options at renderer level (from here)
  • English language updates
  • Added full changelog (CHANGELOG-SB.txt in the program folder)
  • Removed the iTunes navigation patch from issue 921 since it broke iTunes support for some users
  • Synchronised with the official build, which adds Android support and preliminary virtual folders support
  • Removed patch from issue 595 which allowed an extra file sorting option because it conflicts with the official build synchronisation
  • 2 weeks later...

1.20.441-SB12:

  • Synchronised with official r441 from r414 (Click here for changelog)
  • Support VOBsub subtitles inside MKV files with MEncoder (from here)
  • Bravia 5500 uses MediaInfo now which fixes codec support (feedback is appreciated on this, please)

Any of you guys run into this new Cinavia BS?

The euro release of Salt is protected with it. I tried to play a backup of mine and it ran fine with a DTS soundtrack. Am I missing something ?

Having tried to watch 1080p over the (wired) network it always has the stop and start thing happen would upgrading my router to one with Gbit ports help or is the 10/100 ports enough?

The router should be fine, as my Linksys 10/100 is just fine... unless your router is somehow slower. Is your computer fast enough for 1080p streaming? Mine is, but if there are subtitles, then it isn't.

I kept having issues playing certain movies that PMS would encode them. It added either "Subtitles" or "encoded" to the title and it would start to play and then PMS would crash. Got sick and tired of it so I went back to TVersity... that's a pain too to get it to connect to the PS3.. .ugh.

This topic is now closed to further replies.
  • Posts

    • Neowin shudders at the many, many posts from users that block their ads
    • I'm from Australia. This posts reeks of a Nigerian scammer.
    • It's funny that iPhone users think they are getting feature, where in fact they are getting cosmetics that just do iteration circles of "improvement" of the said cosmetics. Apple just doesn't know what to do with this product anymore. There is no innovation on this areas anymore.
    • You can disable the bloat on every browser. That's not the point. I will never use a browser of a shady company. I don't trust them at all. I can still find adblocking solutions than having to rely on a browser from a shady company. Every year they try something shady lol 2016: Brave Ad Replacement https://archive.is/W0k4j#selection-203.7-203.28 2016: pay-to-win Wikipedia clone into the default search engine list https://github.com/brave/browser-laptop/issues/5475 2018: Tom Scott and other creators noticed Brave was soliciting donations in their names without their knowledge or consent. https://www.reddit.com/r/brave...aims_that_brave_is_falsely/ 2020: Brave got caught injecting URLs with affiliate codes https://www.theverge.com/2020/...-crypto-privacy-ceo-apology 2021: Brave's TOR window was found leaking DNS queries https://www.zdnet.com/article/...n-addresses-in-dns-traffic/ 2022: Brave floated the idea of further discouraging users from disabling sponsored messages. https://github.com/brave/brave-browser/issues/22066 2023: Brave got caught installing a paid VPN service on users' computers without their consent. https://www.xda-developers.com...owser-installs-vpn-windows/ 2023: Brave got caught scraping and reselling people's data with their custom web crawler, which was designed specifically not to announce itself to website owners. https://stackdiary.com/brave-s...ghted-data-for-ai-training/ 2024: Brave gave up on providing advanced fingerprint protection, citing flawed statistics https://www.bleepingcomputer.c...tion-as-it-breaks-websites/ 2025: Brave staff publish an article endorsing PrivacyTests and say they "work with legitimate testing sites" like them. This article fails to disclose PrivacyTests is run by a Brave Senior Architect! https://brave.com/blog/adblock...esting-websites-harm-users/
    • Alpine Linux 3.24 released with support for COSMIC Desktop and other improvements by David Uzondu Alpine Linux 3.24 has been released with updated system packages, including Linux kernel 6.18 and Rust 1.96. The team also added IPv6 support to the system installer, and they introduced automatic serial console configuration for headless setups. System76's COSMIC desktop environment is now available in the community repo. System76 originally started building this DE because its developers found GNOME to be pretty limited. Plus, it did not help that with virtually every GNOME update, the changes broke System76's custom desktop extensions. As for system packages, the Alpine team moved GTK+ 3.0 from the main repository to the community repository due to its legacy status. py3-setuptools has been upgraded to version 82.0.0, while the old pkg_resources module has been completely dropped. The team also removed outdated packages that still relied on py3-six and GTK+ 2.0. In addition to that, libsoup 2 has been removed because the library was affected by multiple security vulnerabilities. If you're a GRUB user, the Alpine Team said that you must manually run the grub-install command with your specific device or EFI options right after upgrading your system, otherwise, your computer may fail to boot properly with the newly updated GRUB 2.14 bootloader. New installations of Alpine Linux now offer an optional path to a /usr-merged directory layout if you set the BOOTSTRAP_USR_MERGED environment variable to 1 before you execute the setup-disk command. If you already run an older installation, you can migrate manually by installing the merge-usr package and executing its binary as the root user. The team recommends this layout to align Alpine with modern Linux standards, though you should verify your custom scripts before making the switch. Alpine Linux is a pretty tiny (~5MB) Linux distro built around musl libc, BusyBox, and OpenRC. It's been around since 2005, comes with its own package manager called Alpine Package Keeper (APK), and is widely used in modern cloud computing and software deployment.
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      229
    3. 3
      Edouard
      134
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!