Recommended Posts

Don't use this anymore since putting a Netgear ReadyNAS on the network. Although it doesn't transcode MKV files I try and avoid those and if I end up with them I just watch in the bedroom via my Acer Revo and XBMC.

Hey all, lately a few mkv's have been giving me issues while trying to stream them through media server. Specifically they say "Data is Corrupt" and I cannot play them at all. HIt has only been recently, and only a certain few. So does anyone know what is up? A new kind of codec perhaps? Do I have to use mkvmerge or some similar app and do something to get them to work? Up until this point in time never had any real issues with mkv files at all, so the few that did not work in the past I just did not watch. So any help here is appreciated. Is there a newer version of media server perhaps? TIA, DL

Is there an updated guide on how to stream mkv's to a PS3? Or is the OP up to date? I'm sick and tired to trying to get my 360 to play them. They're always skippy and laggy.

PS3 Media Server, and yes i know its PS3 but PS3 and xbox use the DLNA protocol for streaming so it works

Hey all, lately a few mkv's have been giving me issues while trying to stream them through media server. Specifically they say "Data is Corrupt" and I cannot play them at all. HIt has only been recently, and only a certain few. So does anyone know what is up? A new kind of codec perhaps? Do I have to use mkvmerge or some similar app and do something to get them to work? Up until this point in time never had any real issues with mkv files at all, so the few that did not work in the past I just did not watch. So any help here is appreciated. Is there a newer version of media server perhaps? TIA, DL

Install the build from here - http://ps3mediaserver.org/forum/viewtopic.php?f=14&t=8883

Install the build from here - http://ps3mediaserve...php?f=14&t=8883

Thanks AB, gonna give that a whirl today.

' timestamp='1293697852' post='593539912']

Actually I have the same problem with SOME mkv files and I am using the above build from day one!

Interesting, i will post back once I use it a few days and see, I just wish I could remember what mkv's it was, I know I deleted them. wacko.gif

Sometimes the program/computer may need to be restarted. I had a issue with Salt earlier, but a restart somehow solved it.

Hmmm, considering I leave my comp on 24/7 and have not restarted it in weeks, this could be the case. Gonna restart once I install the new build.

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

' timestamp='1293998996' post='593549926']

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

Thanks for the heads up (Y)

' timestamp='1293998996' post='593549926']

PMS SubJunk Build (Updated 02/01/2011)

:woot:

1.20.412-SB9:

* Applied tsp's bugfixes 2, 3, 4 and 6 from here.

* Fixed a lot of typos and improved descriptions

* Added option on the MEncoder settings page to customise DVD/VOBsub subtitle quality by offering high-quality anti-aliasing

* Removed multicore option confirmation popup

* Customised installer executable icon

* CPU cores message pluralises/singularises properly

* Changed some default settings (engines, extensions, etc. are now hidden while browsing on PS3 by default to make it nicer for most users who don't care about that stuff)

* Customised installation window image

* WEB.conf is now saved in AppData instead of Program Files

* Updated MPlayer to build 32735

* Updated FFmpeg to build 26112

* Added a Linux build

Thanks for the heads up (Y)

Another new build though

1.20.412-SB10:
  • Added PMSEncoder 1.3.0
  • PMSEncoder engine is applied by default and doesn't need to keep being added to PMS.conf after saves
  • Removed tsp's bugfixes since they were causing playback problems for Bravia users
  • Mac build now supports update.jar/plugins (issue 766) (if anyone wants to build it)
  • Allow pluggable engines (issue 686)
  • Fixed some code indentation
  • Language changes
  • Updated NSIS from 2.42 to 2.46

1.20.412-SB11:

  • Processes killed cleanly on non-Windows operating system (issue 680)
  • Allow custom MEncoder options at renderer level (from here)
  • English language updates
  • Added full changelog (CHANGELOG-SB.txt in the program folder)
  • Removed the iTunes navigation patch from issue 921 since it broke iTunes support for some users
  • Synchronised with the official build, which adds Android support and preliminary virtual folders support
  • Removed patch from issue 595 which allowed an extra file sorting option because it conflicts with the official build synchronisation
  • 2 weeks later...

1.20.441-SB12:

  • Synchronised with official r441 from r414 (Click here for changelog)
  • Support VOBsub subtitles inside MKV files with MEncoder (from here)
  • Bravia 5500 uses MediaInfo now which fixes codec support (feedback is appreciated on this, please)

Any of you guys run into this new Cinavia BS?

The euro release of Salt is protected with it. I tried to play a backup of mine and it ran fine with a DTS soundtrack. Am I missing something ?

Having tried to watch 1080p over the (wired) network it always has the stop and start thing happen would upgrading my router to one with Gbit ports help or is the 10/100 ports enough?

The router should be fine, as my Linksys 10/100 is just fine... unless your router is somehow slower. Is your computer fast enough for 1080p streaming? Mine is, but if there are subtitles, then it isn't.

I kept having issues playing certain movies that PMS would encode them. It added either "Subtitles" or "encoded" to the title and it would start to play and then PMS would crash. Got sick and tired of it so I went back to TVersity... that's a pain too to get it to connect to the PS3.. .ugh.

This topic is now closed to further replies.
  • Posts

    • JetBrains is working to cut false positives in RustRover 2026.2 by David Uzondu Recently, JetBrains released the fifth EAP build of its dedicated IDE, RustRover 2026.2, bringing improvements like a Run gutter icon for criterion_main! macro benchmarking and a feature that alerts you when there are unused traits in your current scope. Now, the company is out with a blog post addressing one of the "most common" complaints from users: false positives. In RustRover, a false positive occurs when the editor incorrectly highlights something as an error even though the project compiles and runs successfully. This mismatch flags a gap between the IDE's internal intelligence and the actual compiler. When the editor flashes red warnings over perfectly valid code, developers lose trust in the tool, which stalls momentum. Traditionally, RustRover runs cargo check to detect compiler errors and warnings, but it also relies on its own code analysis engine to power real-time features. To provide quick feedback, this engine parses your source code into a syntax tree while inferring types and resolving names as you type. Because this engine must work on broken, half-written code and react instantly, its logic sometimes diverges from the compiler's, producing false positives that do not exist in the compiler's eyes. JetBrains said that it has a "dedicated task force" focused specifically on identifying and fixing false positives by analyzing user reports and examining large-scale open-source projects. To speed up this process, the team built an internal system modeled after Crater, the famous Rust project that compiles and runs tests for every single crate published on crates.io. This automated pipeline compares the diagnostics from RustRover's analysis with actual compiler output to catch discrepancies before they reach users, ensuring smoother workflows. RustRover, for those who're unaware, is a dedicated IDE designed specifically for Rust developers. It's been around for a couple of years now, providing features like built-in debugging via LLDB, seamless cargo integration, advanced macro expansion, and HTML support. JetBrains distributes the app under two licensing models: a paid commercial subscription and a free option for non-commercial use.
    • Last year I bought the 2TB variant for $114 on Amazon. That's crazy that the 1TB is now 67% more expensive for half the storage, even with the newer T9 already on the market. And that's considered a good deal.
    • You can disable all non needed features from Brave. There is also Brave Origin which removes them entirely and it is free for Linux.
    • I wish I could use Brave but the tab suspension feature is horrible. It doesn't suspend them like Edge does. Even after 2h open with 70+ tabs (same as Edge), it has 2GB more consumption than Edge for no reason.
    • TeamViewer 15.78.4.0 by Razvan Serea TeamViewer is the fast, simple and friendly solution for remote access over the Internet - all applications in one single, very affordable module. Remote control of computers over the Internet, Instantly take control over a computer anywhere on the Internet, even through firewalls. No installation required, just use it fast and secure. Training, sales and teamwork, TeamViewer can also be used to present your desktop to a partner on the Internet. Show and share your software, PowerPoint presentations etc. File transfer, chat and more, Share your files, chat, switch the direction during a teamwork session, and a lot more is included in TeamViewer. TeamViewer key features: Cross-platform remote access (Windows, macOS, Linux, Android, iOS, IoT) Attended and unattended remote control Secure file transfer between devices Remote printing to local printers Multi-monitor support with easy switching Wake-on-LAN for sleeping devices Session links for quick connections (no password sharing) Web client access (no installation needed) End-to-end encryption (AES-256) Two-factor authentication and access controls AI-powered session insights and reporting Mass deployment and device management tools Customizable allow/block lists for security Command line and script execution remotely Performance monitoring and analytics dashboards TeamViewer 15.78.4.0 changelog: Improvements Permissions inheritance has been improved, increasing reliability when permissions are assigned to user group managers. Bugfixes Fixed a bug where 'Show details' button was not showing up on command bar upon selection of a device group. Fixed a bug which was causing the legacy groups to disappear when applying hide offline filter in basic view. Fixed a bug where devices were loading infinitely after login. Fixed a bug which was causing crash in application. Download: TeamViewer 15.78.4.0 | 32-bit | Portable | Mac | ~70.0 MB (Free for personal use) View: TeamViewer Home Page | Release Notes | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      521
    2. 2
      PsYcHoKiLLa
      230
    3. 3
      Edouard
      135
    4. 4
      ATLien_0
      88
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!