Would You Like To See Windows Se7en Have a Boot Scree  

470 members have voted

  1. 1. Select Your Choice

    • Yes Make it Welcoming
      147
    • Yes, Anything But The Black Screen
      63
    • Yes, It Would be Nice To See While I Wait For It To Load
      53
    • No, It's Pointless As It Loads Quick
      97
    • Who Cares
      110


Recommended Posts

It says 'Microsoft ? Corporation' below the progress bar on boot up, I would call that branding. It displays the Windows pearl logo during a portion of the boot sequence, it displays the 'Windows Vista SKU' on the Welcome Screen along with the Windows Logo. So, I don't see how you can say that Microsoft is not signifying their brand. Again, the boot screen is minimal for a reason, it does not need this over emphasis you expect, its just there to hide the boot processes and services. Something which most Linux distributions does not do.

Microsoft ? Corporation is nice and fine, but how about actually having the NAME OF THE PRODUCT there? I'm not saying there should be a dramatically photoshopped, shiny, bling image. Just a SIMPLE bootscreen like what Windows XP did. A Windows Logo, the name of the product and the loading bar. That's it. Do you really call that over emphasis? Please.

Windows XP had the ideal bootscreen that they should carry forward. Period.

Although having a boot screen may or may not be a good idea, there is a devide amongst the users who have responded to this poll.

But what i also want to know is, should the 3 part boot after the Bios logo be cut down i.e Black Screen with Scrolling Bar, Windows Orb, Welcome Screen.

How do you think the boot experience should be?

Edited by Windows Tester
Microsoft ? Corporation is nice and fine, but how about actually having the NAME OF THE PRODUCT there? I'm not saying there should be a dramatically photoshopped, shiny, bling image. Just a SIMPLE bootscreen like what Windows XP did. A Windows Logo, the name of the product and the loading bar. That's it. Do you really call that over emphasis? Please.

Windows XP had the ideal bootscreen that they should carry forward. Period.

microsoft doesn't want windows branding to appear on the low res, low colour boot screen. they want the windows experience to begin after windows has booted that's what the windows orb is for, to tell you windows has started.

i've already explained this before in the thread tbh

yes i know, but what about instead of having the black screen with the scrolling bar, how about having the Windows Orb with the nessesary branding as the replacement and then the Welcome screen, or incorporate the Windows Orb into the Welcome Screen with the nessesary branding, letting Windows boot quicker.

yes i know, but what about instead of having the black screen with the scrolling bar, how about having the Windows Orb with the nessesary branding as the replacement and then the Welcome screen, or incorporate the Windows Orb into the Welcome Screen with the nessesary branding, letting Windows boot quicker.

i'm sure windows is still loading when the windows orb is being shown. i don't know what will happen but i doubt they will put branding onto any boot screen because it won't look like it should. once the drivers are loaded the windows experience can begin because the branding can be displayed as it should be.

i'm sure windows is still loading when the windows orb is being shown. i don't know what will happen but i doubt they will put branding onto any boot screen because it won't look like it should. once the drivers are loaded the windows experience can begin because the branding can be displayed as it should be.

surely Microsoft could speed up this process, thus by making Windows boot quicker, Microsoft has already sped up Windows Vista possibly by making background services load quicker.

so maybe it's an idea they could look into.

Found This:-

Boot Performance

For Windows 7, we have a dedicated team focused on startup performance, but in reality the effort extends across the entire Windows division and beyond. Our many hardware and software partners are working closely with us and can rightly be considered an extension to the team.

Startup can be one of three experiences; boot, resume from sleep, or resume from hibernate. Although resume from sleep is the default, and often 2 to 5 seconds based on common hardware and standard software loads, this post is primarily about boot as that experience has been commented on frequently. For Windows 7, a top goal is to significantly increase the number of systems that experience very good boot times. In the lab, a very good system is one that boots in under 15 seconds.

For a PC to boot fast a number of tasks need to be performed efficiently and with a high degree of parallelism.

Files must be read into memory.

System services need to be initialized.

Devices need to be identified and started.

The user?s credentials need to be authenticated for login.

The desktop needs to be constructed and displayed.

Startup applications need to be launched.

Engineering Windows 7: Boot Performance

Microsoft ? Corporation is nice and fine, but how about actually having the NAME OF THE PRODUCT there? I'm not saying there should be a dramatically photoshopped, shiny, bling image. Just a SIMPLE bootscreen like what Windows XP did. A Windows Logo, the name of the product and the loading bar. That's it. Do you really call that over emphasis? Please.

Windows XP had the ideal bootscreen that they should carry forward. Period.

There is a key reason for the new Boot screen in Vista, Paul Thurrott explains why:New boot screen

During the Windows Vista beta, testers often complained that Microsoft was purposefully not revealing the "real" Windows Vista boot screen and was instead taunting them with a plain boot screen that displayed only a simple progress bar and a copyright message (Figure). Well, here's the real surprise: That Spartan boot screen is in fact the final boot screen and it looks like that by design. Here's the story.

Over the past few years, an alarming number of companies have released products that slow down the Windows boot process. BIOS makers, PC makers, and video card makers are among the companies that have begun adding superfluous advertisement screens at system boot, trumpeting their products, curiously, to the people who had already bought them. Working with the industry, Microsoft asked these companies to cut down on their pre-boot screens. And to do its part, Microsoft has created this simple new boot screen for Windows Vista.

Microsoft tells me that the new boot screen reduces Vista's boot time by an average of 6 seconds compared to the graphical screen they were originally planning to use. 6 seconds may not sound like a lot of time, but in the context of a PC booting, it's the difference between a near-appliance and an aging 286 that last wheezed its way along with Windows 3.1.

As a result, Windows Vista should boot much more quickly on the same hardware than does Windows XP. And in my own experience this is quite definitely the case. (There are other Vista technologies that help this system boot more quickly as well, of course.)>

His Windows Vista review here

Although having a boot screen may or may not be a good idea, there is a devide amongst the users who have responded to this poll.

But what i also want to know is, should the 3 part boot after the Bios logo be cut down i.e Black Screen with Scrolling Bar, Windows Orb, Welcome Screen.

How do you think the boot experience should be?

The Welcome screen is the most important part of the boot sequence, it display account information and provides a way for the user to authenticate themselves and load their personal settings.

The Welcome screen is the most important part of the boot sequence, it display account information and provides a way for the user to authenticate themselves and load their personal settings.

I know what the Welcome Screen is for, my suggestion was, why not incorporate the Boot Screen into the Welcome Screen

I know what the Welcome Screen is for, my suggestion was, why not incorporate the Boot Screen into the Welcome Screen

Huh? That would be distracting and unnecessary. Remember, at the Welcome screen, the user begins to authenticate them self to the OS. You don't want any distractions during this process. I just can't picture a progress bar with the user typing in his account information.

Perhaps i better elaborate what i mean by incorporating the Boot Screen into the Welcome Screen.

Your switch on you computer and after the Bios Screen, The Windows Orb appears with the standard jingle and underneath is the progress bar that indicates that Windows is loading.

Both the Windows Orb and Progress bar fades out and the Welcome Screen fades in, then the desktop is displayed.

Do you understand now?

Perhaps i better elaborate what i mean by incorporating the Boot Screen into the Welcome Screen.

Your switch on you computer and after the Bios Screen, The Windows Orb appears with the standard jingle and underneath is the progress bar that indicates that Windows is loading.

Both the Windows Orb and Progress bar fades out and the Welcome Screen fades in, then the desktop is displayed.

Do you understand now?

I thought that MS was going to use Instant on. That would make a boot screen obsolete. :)

Perhaps i better elaborate what i mean by incorporating the Boot Screen into the Welcome Screen.

Your switch on you computer and after the Bios Screen, The Windows Orb appears with the standard jingle and underneath is the progress bar that indicates that Windows is loading.

Both the Windows Orb and Progress bar fades out and the Welcome Screen fades in, then the desktop is displayed.

Do you understand now?

by the time the orb animation plays, most drivers are already loaded. Thus negating the need for a bootscreen at that point.

Does it even matter, you see it for like 10 seconds at boot, shouldn't you be spending more time griping about the actual GUI improvements? Maybe they could give us a mood orb that changes colors to reflect however my PC is feeling that day.

Some older systems aren't fast enough for a 10 - 40 seconds boot sequence thus the reason for a boot screen to be implemented in the OS.

Some system services from 3rd party applications and drivers increasing the startup time of the Windows OS thus the reason for boot screen.

Until Microsoft decides to implement the Instant On feature in Windows Seven and 3rd Party developers change the way their system services from applications and drivers effect the Windows OS, the boot sequence time will be affected.

Some older systems aren't fast enough for a 10 - 40 seconds boot sequence thus the reason for a boot screen to be implemented in the OS.

Ok, but not literally, just figuratively, 10 seconds. I don't see the need for anything more than the classic Windows 2000 loading bar, or a verbose boot log.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Creative Sound Blaster AE-X PCIe review: your headphones will love it by Steven Parker If you have been reading Neowin for any length of time, you may remember that I reviewed the Sound Blaster Audigy FX Pro back in April. I found it to be an excellent budget sound card, even though it lacked support for formats such as DTS over the included SPDIF port. Anyway, Creative reached out to me again asking if I was interested in reviewing the Sound Blaster AE-X. It is a card mainly targeted at headphone wearers, which I'll get into a bit later. Before we get underway, here is a disclaimer: Creative Labs provided a free sample without any review pre-approval. Here are the full specs of it: Creative Sound Blaster AE-X Dimensions: 179 x 126 x 18 mm Weight: 263g / 9.28 oz Platform: PCI-e DAC: ESS ES9039Q2M Connectivity Options Side: Rear: 1 x HD Audio Front Panel Connector, 1 x ⅛“ Headphone port, 1 x RCA Line-out (Left) port, 1 x RCA Line-out (Right) port, 1 x Coaxial SPDIF-out port, 1 x ⅛“ Mic in/Line-in port, 1 x TOSLINK SPDIF-in port Surround: No DNR / SNR: THD+N: 0.0001% Dynamic Range 130 dB Recording Resolution: PCM up to 32-bit / 192kHz (Stereo) Direct Mode: Line Out (Stereo): PCM up to 32-bit  384 kHz Coaxial SPDIF Out: PCM up to 24-bit 192.0 kHz Headphone Amp: PCM up to 32-bit / 384kHz (Stereo) Native DSD: DSD64, DSD128, DSD256 Output Impedance: 1Ω, Supported Headphone Impedance: 8–600Ω, IEM: 0.5Vrms, Low: 1.5Vrms, Mid: 3Vrms, High: 6Vrms, Maximum output power: 350mW @ 32Ω (High), Maximum output voltage: 6Vrms (High) Front Panel Headphone Amp: PCM up to 32-bit / 192kHz (Stereo) Native DSD: DSD64, DSD128 Output Impedance: 10Ω, Supported Headphone Impedance: 32–300Ω, Maximum output power: 40mW @ 32Ω, Maximum output voltage: 1.9Vrms ASIO: ASIO 2.3 Total Harmonic Distortion: THD+N: 0.0006% Dynamic Range: 114 dB Scout Mode: Yes EMI shielding: No (but it passed all the FCC emission tests) Operating temperature: 0–45°C Input Power: 12V⎓0.5A Warranty: 1 Year (MSRP) Price: $179.99 / £169.99 The Sound Blaster AE-X was announced at the end of May, and it becomes clear that it is mainly for headphone wearers. I should also note that the card does not support DDL/DTS encoding technology, but it is said to support decoding through the coaxial SPDIF port. I was able to test this working with the classic Windows Sound properties, but I could not get a DTS (decode) signal through my Logitech Z906, it defaulted to 3D sound whenever I played DTS content through Plex or Emby. In addition, this card only supports two channels (stereo) over the speakers. The surround support is limited to the Headphone Amp, so before I get underway, what we have here is a card mostly intended for headphone use, especially with its SPDIF In (Toslink) port where you could connect another device like a console. So what about the highlights of this card? The AE-X is powered by the ESS SABRE DAC (ES9039Q2M), which is capable of a 130 dB dynamic range. In addition, it supports 32-bit/384 kHz playback for deeper detail and clarity. The headphone amplifier delivers up to 350 mW @ 32Ω, which admittedly far surpasses standard onboard audio, offering support for studio-grade headphones. DSD256 and ASIO 2.3 are also supported. What doesn't it have? No support for What-U-Hear, Super X-Fi, or the SmartComms Kit No EMI shielding, but it passed all the FCC emission tests (from the FAQ) I also want to make it clear that I am no audiophile. For me, it's purely subjective and it should just "work" out of the box. First impressions As I said in the introduction, I was a bit sad to see that the AE-X only supports stereo output, meaning it would not be on par with my ALC1220 over my speakers, as I mentioned it seems like this card is marketed toward headphone users. Since I am not an avid gamer that would rule me out as a potential customer, but I can still test its capabilities! The card arrived in a nice-looking box, as shown above. It's quite a bit larger than the Audify FX Pro that I reviewed back in April, and at first I thought the covering meant that it was EMI shielded, but it isn't as mentioned above in the highlights section. What's in the box: 1 x Sound Blaster AE-X PCIe card 1 x 3.5 mm CTIA TRRS to Dual TRS Headset Splitter Cable 1 x Quick Start Guide Aside from the Quick Start Guide, which someone at my age (I guess) needs a magnifying glass to read thanks to the tiny fonts, Creative Labs also has the manual online, which first requires you to prove that you're human in order to access it (so I can't direct link it). Anyway, the box is mostly made up of cardboard, and the only plastic in it is the anti-static bag for the card itself. Design Top Bottom The card itself looks pretty cool and actually wouldn't look out of place in an all-white build. There's only one connector, and for some reason it is awkwardly placed on the side (front-facing) that is for the front panel audio connector, which will let you use the headphones through the front PC audio jack. Since the front panel Headphone Amp has fewer capabilities than the rear headphone port, I decided not to use it. Rear of card PCI-e interface The rear of the card is completely open and is normally where you would find the front panel connector. The PCIe interface side is completely covered, which initially made me think it was EMI shielded. I/O panel Side (front-facing) with Front panel connector On the outer rear bracket side we have the TOSLINK SPDIF in, Coaxial SPDIF out, RCA line out (Right), RCA line out (Left), Headphone out, and Mic/Line in ports. On the front facing portion of the card itself is the F-panel connector. Usage Test System Our test system consists of the following: AMD Ryzen 9 9950X3D Gigabyte X870E AORUS MASTER (BIOS F12) Corsair RM1000x (2024) Thermal Grizzly Kyronaut (33x33x0,2mm) 2x 32GB Kingston Fury Beast RGB DDR5 6000MT/s CL36-38-38-80 T-Force Z540 2TB (PCIe Gen5) NVIDIA GeForce RTX 5090 Founders Edition (NVIDIA) Creative Sound Blaster AE-X Windows 11 25H2 Pro I installed the card into the Gigabyte X870E AORUS MASTER which includes the RealTek ALC1220 onboard audio. For our subjective listening tests, I used the Coaxial SPDIF port to my Logitech Z906 speakers. For headphone tests I used the OneOdio Studio Max 2 Wireless DJ Headphones that I reviewed last month. After installing the audio driver, I installed Creative Nexus, which is a relatively new app designed for the latest Sound Blaster cards. Then I discovered the AE-X needed both a driver update from 1.00.15.0001 to 1.01.09.000 and a firmware update from 1.00.06.0000 to 1.00.06.0002, then I was set to go. It should be noted that the card did not work without the driver (not Plug and Play). As you can see above, you can manage the firmware, driver, and inputs via Advanced Settings on the Device tab. By default Nexus enabled "Direct Mode". Upon clicking on Acoustic Engine, the Equalizer can be enabled and set to four different presets, which are: Gaming Music Movies Footsteps Enhancer There's also a dedicated Scout Mode for gamers. I mainly used Tidal and Spotify in the past week to listen to some of my Liked Songs (which now total over 700) in Shuffle mode; there were no pops or interference that I could hear. I also found a 5.1 Surround Music playlist on Tidal that sounded really great over Studio Max 2 headphones. When I reviewed the Audigy FX Pro, I went out and purchased a Logitech Z906 set second-hand for €100 specifically to use with the card, but in this instance all I could get on the AE-X was the 3D output of surround sound through Coaxial SPDIF and although it still sounded great, it isn't quite as good as DTS Interactive via my onboard Realtek ALC1220. Conclusion So what have I learned? The AE-X lacks multi-channel support for 5.1/7.1 setups and drops support for modern surround technologies like Dolby or DTS, functioning strictly as a stereo output device. So to really benefit, you will need Studio-grade headphones to "hear" the benefits of this card. With that being said, I can imagine it will appeal to gamers who are switching between console and PC. By utilizing the SPDIF in port, you could just plug your headphones into the AE-X (front or rear port) and then switch between PC and Console without having to move the headphones to a different port. As I said in the Sound Blaster Audigy review, the EQ in the Creative Nexus app offers safe presets, which allows a user to further tweak the lows, mids, and highs for a personal listening experience. Of course it all depends on the headphones you hook up to it. Speaking of headphones, I kind of wish I had higher-quality Studio-grade headphones to really test this card with; I'm not usually wearing headphones in my day to day duties. The only time I will wear them is if I want to listen to music very late at night and I don't want to disturb my neighbors, so my rating (verdict) is based on this fact. Someone with a PC/Console setup and wears headphone religiously to game, and consume media will benefit much more than I from the high-quality Headphone Amps that are included in the AE-X. Once again, I do feel like Creative could have gone the extra mile to support the S/PDIF port a bit more. Why include it if you're not supporting the main popular digital formats? It seems like the decision was more of a legacy-based one, offering uncompressed 2-channel PCM audio, for users with high-fidelity audio systems and external DACs. Maybe I will be lucky enough to review a card that truly includes all these features in the future. I am sure readers with far more knowledge on audio systems than me will correct me in the comments below. I'll just say I am happy to learn what I don't know! Where to buy The Sound Blaster AE-X is available to purchase now in preorder for $179.99 on the U.S. Creative website, or for £169.99 on the Creative UK website and will start shipping to customers from June 25.
    • $80 or 90%, anything else would be financial suicide one way or another.
    • Or... just use Bitwarden. Free, and has on-prem option as well. Works both on desktop and mobile, wherever you are. The age of local password files is over.
    • Thanks
    • I actually got to use one of those so called "backup codes" once. It was for a customer, I choose the backup code option, and by the grace of god, they actually hade them printed out. Imagine my surprise, when after using the backup code, Google then told use we had to enter a code they just sent to the gmail address we currently did not have access to. I was not amused, Google backup codes should be the end all get out of jail free card, because you had to have access to the account to even get them.
  • Recent Achievements

    • Week One Done
      Supreme Spray LV earned a badge
      Week One Done
    • One Month Later
      Genuinetonerink- Dubai earned a badge
      One Month Later
    • Week One Done
      Genuinetonerink- Dubai earned a badge
      Week One Done
    • One Year In
      hhgygy earned a badge
      One Year In
    • Week One Done
      AMV earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      164
    3. 3
      PsYcHoKiLLa
      88
    4. 4
      Steven P.
      74
    5. 5
      Michael Scrip
      73
  • Tell a friend

    Love Neowin? Tell a friend!