Recommended Posts

How was the error our fault? The error occurred at least 5 times yesterday, even after an update and several reboots. For some reason today it decided to magically work.

I can understand that. I have the odd quirk with Windows Update on 7000 where it'll throw off an error for no reason and it eventually fixes itself automagically.

Well, I'm stuck at 77.9% at a whooping 5k/sec most of the time. Seeds(11) Peers(5429) !!! Sometime, it goes down to 0.6k/sec. Terribly slow...!

Yeah, I've been downloading for about 15 hours now, and never been connected to a seed. I'm up to 78.3 now, and figure it should be done by midnight.

Woohoo 200K down, this should last for about 5 seconds lol

Right now, it is not getting any faster than it already is. So I have been just turning on utorrent every hour or so to catch up to the top and then turn it back off when the speeds drop off. It is just pointless to be seeding to all the people that just started the torrent and still at 20% when none of us even have a full copy of it.

I say another three hours before people start hitting 100%

Yeah, I've been downloading for about 15 hours now, and never been connected to a seed. I'm up to 78.3 now, and figure it should be done by midnight.

Woohoo 200K down, this should last for about 5 seconds lol

I'm at 78.6% and my eta is 4hrs and it's currently 4:36pm where I am. I should have it by 8 tonight so I bet you'll have it long before midnight your time.

its not useless,,,its the CAUSE

Maybe "useless" wasn't the right word. But, I just don't want to be uploading endlessly when downloading at near zero speeds. I always do my part in seeding with the upload ratio at 1.5 right now. Most people don't even both doing that in the first place.

I am not an expert at torrents, but I have for years messed with them. For those that don't understand why this is taking so long, and why it shows seeders but none are active, here is a small explanation.

The torrent could show, let's say 0 (12) seeders but your percentage downloaded keeps increasing slowly. This means that 12 have completed 100% but you are NOT connected directly to them. However thousands in the swarm could be connected to the completed connections. You are feeding off those connections. Thus, you are still downloading. Think about it, a few seeders could not service 5000 torrent users alone. Hope this helps.

I am not an expert at torrents, but I have for years messed with them. For those that don't understand why this is taking so long, and why it shows seeders but none are active, here is a small explanation.

The torrent could show, let's say 0 (12) seeders but your percentage downloaded keeps increasing slowly. This means that 12 have completed 100% but you are NOT connected directly to them. However thousands in the swarm could be connected to the completed connections. You are feeding off those connections. Thus, you are still downloading. Think about it, a few seeders could not service 5000 torrent users alone. Hope this helps.

It also could be because the torrent was released 18 hrs ago and that it's almost 3.5GB :)

when will we see 32-bit?

Here's a post from DiamondNRG:

144. Posted by DiamondNRG (torrent uploader) on Mar 03 2009 at 18:45

Soldatbigviv ... This is my torrent. Get the hell out. YOU ARE FAKE and so is your build. I will delete this whole thing if you don't go away.

Everyone else ... someone ban him, whoever has that authority.

And I will get to x86 when I have it, so there is no timeframe, just hold tight.

Torrents are like socialism. If everyone helps out things go fast. If people act like douchebags and just leech things don't do so well. Its not about the number of seeders that will determine how fast you get the download, its the number of connected peers you have. I can see only one seeder but my peers are giving me about 400kb/s download (I haven't even downloaded a byte from the seeder).

I am not an expert at torrents, but I have for years messed with them. For those that don't understand why this is taking so long, and why it shows seeders but none are active, here is a small explanation.

The torrent could show, let's say 0 (12) seeders but your percentage downloaded keeps increasing slowly. This means that 12 have completed 100% but you are NOT connected directly to them. However thousands in the swarm could be connected to the completed connections. You are feeding off those connections. Thus, you are still downloading. Think about it, a few seeders could not service 5000 torrent users alone. Hope this helps.

care to share some spirit? there are always some trackers outa there who only enjoy your bandwith (this movie **** anyone?) but we live in a time (after edonkey go nuked and so and so one) and i really feel ashamed for ur post,,,anyway: pls give me the final 100% account warning and iam being free!

or what evar,,,

uptil now my greatest hero:

20071126-Pittiplatsch1.jpg

I don't think they will. This beta refresh was only for TAP customers since they were all complaining about the lack of builds to test.

We got ours through TAP, both x64 and 32-bit varieties. From what I've heard a select group of early beta testers on connect also received build 7048. Eventually someone will upload the 32-bit version to a torrent site, unfortunately we will not be doing so because it violates our TAP terms of service.

And for those thinking that 7048 was RC1... Myth Busted.

http://www.digitalmeld.com/2009/03/03/micr...048-is-not-rc1/

care to share some spirit? there are always some trackers outa there who only enjoy your bandwith (this movie **** anyone?) but we live in a time (after edonkey go nuked and so and so one) and i really feel ashamed for ur post,,,anyway: pls give me the final 100% account warning and iam being free!

What? I can't understand anything you said. :blink:

We got ours through TAP, both x64 and 32-bit varieties. From what I've heard a select group of early beta testers on connect also received build 7048. Eventually someone will upload the 32-bit version to a torrent site, unfortunately we will not be doing so because it violates our TAP terms of service.

And for those thinking that 7048 was RC1... Myth Busted.

http://www.digitalmeld.com/2009/03/03/micr...048-is-not-rc1/

Really going out on a limb here today, aren't you Digital Meld? Already posted at least 5 articles on 7048 over the past few hours.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Exactly. They won't go 100 because current gen consoles are simply too old for any groundbreaking graphics or gaming experience otherwise. They will go with standard (console) price 70 or go with 80 if they really want to go premium. Of course they will have more expensive options too with some useless cosmetics as always.
    • Doesn’t surprise me at all. God is light & He gave us life so it sounds almost logical that we would therefore emit a certain amount of light.
    • This is what I want. Hey Gemini, how do I remove you from all my google products permanently?
    • I would never install install this build before rtm process. only 3 months to go. never install on your daily devices. just wait 3 months.
    • Motrix Next 3.9.6 by Razvan Serea Motrix Next is a modern, open-source cross-platform download manager built as the official next-generation successor to the original Motrix project. It has been completely rewritten using Tauri 2, Vue 3, TypeScript, and Rust, while still relying on the powerful Aria2 download engine for high-speed multi-protocol transfers. The app supports HTTP, HTTPS, FTP, BitTorrent, ED2K and magnet links, offering advanced features like multi-connection acceleration, task scheduling, bandwidth control, and batch download management. With a significantly reduced install size (around 20MB), it focuses on being lightweight, fast, and resource-efficient compared to traditional Electron-based download tools. Designed for Windows, macOS, and Linux, Motrix Next delivers a clean, modern UI inspired by Material Design 3 principles, with smooth animations and a minimal workflow. It improves usability through better download organization, system tray integration, and enhanced torrent handling including selective file downloads and tracker management. Motrix Next features: Multi-protocol downloads — HTTP, FTP, BitTorrent, Magnet, .torrent, ED2K, and Metalink tasks BitTorrent — Selective file download, DHT, peer exchange, encryption controls, metadata caching, GeoIP peer flags, and tracker probing Browser extension integration — Embedded Extension API with independent authentication, download confirmation, smart auto-submit, filename hints, referer/cookie forwarding, and real-time controls (Chrome Web Store · Edge Add-ons) Safe filename handling — Content-Disposition, RFC 2047, non-UTF-8, percent-encoded, and extensionless URL resolution with path traversal sanitization Download organization — Favorite and recent folders, optional file-type categorization, stale-record cleanup, and completed history backed by SQLite Concurrent downloads — Independent controls for active tasks, HTTP connections per server, segments per file, and BT peer limits Speed control — Global and per-task upload/download limits with day-of-week and time-of-day scheduling System integration — Tray operation, optional tray speed display, macOS Dock badge/progress, protocol handlers for magnet://, thunder://, and motrixnext:// Lightweight mode — Destroys the WebView on minimize-to-tray while Rust keeps the engine, task monitor, notifications, history, and extension routing alive Notifications and power options — Native task start/complete/failure notifications, keep-awake during downloads, and optional shutdown after completion Network controls — Scoped proxy support for downloads, app updates, and tracker updates, plus system proxy detection Auto-update channels — Stable, Beta, and Latest Across Channels policies with separate download and install phases Diagnostics — Structured logs, exportable diagnostic ZIPs, database integrity checks, automatic DB rebuild, and Linux GPU rendering fallback Personalization — Light/dark/system theme, 10 color schemes, 26 languages, and first-launch system language detection Motrix Next 3.9.6 changelog: New Features Clipboard management — App-owned copy actions no longer trigger the Add Task auto-detect popup. aria2 input compatibility — Multi-line aria2-style task input is supported for URLs with per-task options such as out=. BitTorrent IPv6 DHT — Added IPv6 DHT support and related configuration. File category URL patterns — File category rules can match URL patterns with validation and localized hints. Task status tags — Added clearer waiting and sharing states for task cards. Download event bridge — Added an aria2 WebSocket event bridge for faster download notifications. Improvements Improved task list transitions and preserved task state during tab switches. Kept RPC origin access enabled for local integrations. Restored AppImage stripping in release builds after beta validation. Added localized preference guidance across supported languages. Download: Motrix Next 64-bit | ARM64 | macOS ~20.0 MB (Open Source) Links: Website | macOS / Linux | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Conversation Starter
      sumytbe earned a badge
      Conversation Starter
    • One Year In
      B4dM1k3 earned a badge
      One Year In
    • One Year In
      DarkWun earned a badge
      One Year In
    • Dedicated
      Almohandis earned a badge
      Dedicated
    • Dedicated
      JuvenileDelinquent earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      181
    3. 3
      PsYcHoKiLLa
      86
    4. 4
      Michael Scrip
      78
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!