Recommended Posts

How was the error our fault? The error occurred at least 5 times yesterday, even after an update and several reboots. For some reason today it decided to magically work.

I can understand that. I have the odd quirk with Windows Update on 7000 where it'll throw off an error for no reason and it eventually fixes itself automagically.

Well, I'm stuck at 77.9% at a whooping 5k/sec most of the time. Seeds(11) Peers(5429) !!! Sometime, it goes down to 0.6k/sec. Terribly slow...!

Yeah, I've been downloading for about 15 hours now, and never been connected to a seed. I'm up to 78.3 now, and figure it should be done by midnight.

Woohoo 200K down, this should last for about 5 seconds lol

Right now, it is not getting any faster than it already is. So I have been just turning on utorrent every hour or so to catch up to the top and then turn it back off when the speeds drop off. It is just pointless to be seeding to all the people that just started the torrent and still at 20% when none of us even have a full copy of it.

I say another three hours before people start hitting 100%

Yeah, I've been downloading for about 15 hours now, and never been connected to a seed. I'm up to 78.3 now, and figure it should be done by midnight.

Woohoo 200K down, this should last for about 5 seconds lol

I'm at 78.6% and my eta is 4hrs and it's currently 4:36pm where I am. I should have it by 8 tonight so I bet you'll have it long before midnight your time.

its not useless,,,its the CAUSE

Maybe "useless" wasn't the right word. But, I just don't want to be uploading endlessly when downloading at near zero speeds. I always do my part in seeding with the upload ratio at 1.5 right now. Most people don't even both doing that in the first place.

I am not an expert at torrents, but I have for years messed with them. For those that don't understand why this is taking so long, and why it shows seeders but none are active, here is a small explanation.

The torrent could show, let's say 0 (12) seeders but your percentage downloaded keeps increasing slowly. This means that 12 have completed 100% but you are NOT connected directly to them. However thousands in the swarm could be connected to the completed connections. You are feeding off those connections. Thus, you are still downloading. Think about it, a few seeders could not service 5000 torrent users alone. Hope this helps.

I am not an expert at torrents, but I have for years messed with them. For those that don't understand why this is taking so long, and why it shows seeders but none are active, here is a small explanation.

The torrent could show, let's say 0 (12) seeders but your percentage downloaded keeps increasing slowly. This means that 12 have completed 100% but you are NOT connected directly to them. However thousands in the swarm could be connected to the completed connections. You are feeding off those connections. Thus, you are still downloading. Think about it, a few seeders could not service 5000 torrent users alone. Hope this helps.

It also could be because the torrent was released 18 hrs ago and that it's almost 3.5GB :)

when will we see 32-bit?

Here's a post from DiamondNRG:

144. Posted by DiamondNRG (torrent uploader) on Mar 03 2009 at 18:45

Soldatbigviv ... This is my torrent. Get the hell out. YOU ARE FAKE and so is your build. I will delete this whole thing if you don't go away.

Everyone else ... someone ban him, whoever has that authority.

And I will get to x86 when I have it, so there is no timeframe, just hold tight.

Torrents are like socialism. If everyone helps out things go fast. If people act like douchebags and just leech things don't do so well. Its not about the number of seeders that will determine how fast you get the download, its the number of connected peers you have. I can see only one seeder but my peers are giving me about 400kb/s download (I haven't even downloaded a byte from the seeder).

I am not an expert at torrents, but I have for years messed with them. For those that don't understand why this is taking so long, and why it shows seeders but none are active, here is a small explanation.

The torrent could show, let's say 0 (12) seeders but your percentage downloaded keeps increasing slowly. This means that 12 have completed 100% but you are NOT connected directly to them. However thousands in the swarm could be connected to the completed connections. You are feeding off those connections. Thus, you are still downloading. Think about it, a few seeders could not service 5000 torrent users alone. Hope this helps.

care to share some spirit? there are always some trackers outa there who only enjoy your bandwith (this movie **** anyone?) but we live in a time (after edonkey go nuked and so and so one) and i really feel ashamed for ur post,,,anyway: pls give me the final 100% account warning and iam being free!

or what evar,,,

uptil now my greatest hero:

20071126-Pittiplatsch1.jpg

I don't think they will. This beta refresh was only for TAP customers since they were all complaining about the lack of builds to test.

We got ours through TAP, both x64 and 32-bit varieties. From what I've heard a select group of early beta testers on connect also received build 7048. Eventually someone will upload the 32-bit version to a torrent site, unfortunately we will not be doing so because it violates our TAP terms of service.

And for those thinking that 7048 was RC1... Myth Busted.

http://www.digitalmeld.com/2009/03/03/micr...048-is-not-rc1/

care to share some spirit? there are always some trackers outa there who only enjoy your bandwith (this movie **** anyone?) but we live in a time (after edonkey go nuked and so and so one) and i really feel ashamed for ur post,,,anyway: pls give me the final 100% account warning and iam being free!

What? I can't understand anything you said. :blink:

We got ours through TAP, both x64 and 32-bit varieties. From what I've heard a select group of early beta testers on connect also received build 7048. Eventually someone will upload the 32-bit version to a torrent site, unfortunately we will not be doing so because it violates our TAP terms of service.

And for those thinking that 7048 was RC1... Myth Busted.

http://www.digitalmeld.com/2009/03/03/micr...048-is-not-rc1/

Really going out on a limb here today, aren't you Digital Meld? Already posted at least 5 articles on 7048 over the past few hours.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • GitHub removes manual model selection from Copilot free and student plans by Karthik Mudaliar GitHub is removing the ability to manually select an AI model from its Copilot Free and Student plans, making its automatic routing system the default and only way to choose a model. This means users on these tiers will no longer be able to deliberately select a particular OpenAI, Anthropic, Google, or Microsoft model for a task. In its announcement, GitHub said Copilot Auto will dynamically choose what it considers the best model for each request. Free and Student accounts will retain access to models from multiple families, although the available selection will continue to depend on the restrictions attached to each plan. GitHub did not identify a fixed pool of models that Auto will always use, and its documentation warns that model availability can change over time. GitHub describes Auto as more than a random fallback system. On supported surfaces, its task-optimization technology evaluates the complexity of a request alongside real-time information about model health and availability. Straightforward prompts can be routed to faster and less expensive models, while more demanding coding tasks may be sent to higher-cost reasoning models. The company says this approach should reduce rate limiting, latency, and failed requests. Auto generally selects one model along natural prompt-caching boundaries rather than repeatedly switching models during a session, as GitHub found that mid-session changes increased costs without producing sufficient improvements in output quality. Users can still check which model generated a response. In Copilot Chat, the information appears when hovering over an answer, while Copilot CLI and the Copilot cloud agent display the selected model alongside their output. Auto is available in Copilot Chat, Copilot CLI, and the cloud agent, with the exact implementation and release status varying between supported development environments. The latest restriction follows several months of adjustments to Copilot’s individual plans. GitHub temporarily halted new Pro, Pro+, and Student subscriptions in April as it sought to manage demand and service reliability. It later introduced token-based billing and began gradually reopening individual-plan registrations on June 17. Alongside the picker change, GitHub is retiring the “Preview” label from Microsoft-developed models. It argues that the label is no longer necessary because Auto handles model routing and models are continuously updated behind the scenes.
    • Look up 'inflation' kid. Ask an AI for the numbers between both games.
    • Google reportedly set to lose two key Gemini and DeepMind researchers to Anthropic by Karthik Mudaliar Google is reportedly preparing to lose two more prominent artificial intelligence researchers, with Gemini contributors Jonas Adler and Alexander Pritzel planning to join rival AI developer Anthropic. According to a report from Bloomberg, both researchers are viewed internally as important contributors to Google’s flagship Gemini model family. Adler worked on Google’s AI coding efforts, while Pritzel was involved in the process used to train AI systems. Neither company has publicly confirmed the moves. The report also does not say when the researchers will formally leave Google or what positions they will hold at Anthropic. Training a large AI model requires decisions covering its architecture, data preparation, distributed computing infrastructure, and post-training methods that shape how the finished system behaves. Researchers with experience operating at the scale of Gemini are consequently difficult to replace quickly. Both Adler and Pritzel have previously contributed to Google DeepMind’s scientific research as well. They are listed among the authors of the company’s work on expanding AlphaFold protein-structure predictions across entire proteomes, alongside AlphaFold researchers including John Jumper. The reported departures arrive shortly after another important change within Google’s Gemini organization. Gemini co-lead Noam Shazeer is leaving Google for OpenAI, after returning to the search company in 2024 through its deal with Character.AI. Shazeer is particularly well known as one of the authors of the Transformer paper, whose architecture became the foundation for most modern large language models. Anthropic, meanwhile, has been recruiting recognizable figures from other leading laboratories. OpenAI co-founder and former Tesla AI director Andrej Karpathy joined Anthropic’s pre-training team in May. His move, followed by the reported recruitment of several Google researchers, suggests Anthropic is strengthening the research teams responsible for the core capabilities of future Claude models rather than concentrating solely on product and enterprise sales. The competition is complicated by the companies’ extensive commercial relationships. Anthropic competes directly with Google’s Gemini models, but it also relies on Google as an infrastructure partner. In April, Anthropic announced an expanded agreement with Google and Broadcom covering multiple gigawatts of next-generation Tensor Processing Unit capacity. TPUs are Google-designed accelerators used to train and run large AI models. via Bloomberg
    • This article makes my head hurt. Lots of confusing words
    • Google adds built-in computer control to Gemini 3.5 flash by Karthik Mudaliar Google has added Computer Use as a built-in tool in Gemini 3.5 Flash, giving developers a single model that can reason about a task and operate graphical interfaces across browsers, mobile devices, and desktop environments. The feature is available through the Gemini API and Google’s Gemini Enterprise Agent Platform, although it remains a preview feature for now. Computer Use enables an AI agent to examine screenshots and return actions such as mouse clicks, scrolling, and keyboard input. A developer’s application must execute those actions, capture the resulting screen, and send it back to Gemini, creating a continuous loop until the task is completed. Google says the integration can be used for activities including repetitive form filling, application testing, research across multiple websites, and longer enterprise workflows. Gemini 3.5 Flash can work with browser, mobile, and desktop environments, whereas Google’s earlier standalone Computer Use model was primarily positioned around browser interaction. The main change is consolidation. Computer control was previously offered through the separate Gemini 2.5 Computer Use preview model. As Neowin reported when that model was introduced, it was designed to interpret a visual interface and generate actions without requiring a website-specific API. Google later brought Computer Use to preview versions of Gemini 3 Pro and Gemini 3 Flash in January 2026. The latest release now incorporates the tool into the stable Gemini 3.5 Flash model rather than requiring developers to select a specialized model solely for interface automation. Gemini 3.5 Flash itself was announced in May as Google’s latest fast model for coding and multi-step agent workflows. It supports a one-million-token input context window and up to 65,000 output tokens, along with adjustable thinking levels that let developers trade additional reasoning for lower latency and cost. Google also added that Gemini 3.5 Flash received targeted adversarial training for computer-use scenarios. The company is also offering safeguards that can require user confirmation before sensitive or irreversible actions and automatically stop a workflow when suspected prompt injection is detected. Its developer documentation describes configurable protections for areas such as financial transactions and changes to sensitive records. Google isn't the first to bring Computer Use to its platform. Anthropic has made computer control available through Claude, while OpenAI has continued improving computer-use performance in its recent models. Microsoft has also applied the concept to business workflows, including a Computer Use capability for the Researcher agent in Microsoft 365 Copilot.
  • Recent Achievements

    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      463
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!