Recommended Posts

What's the advantage of enabling journaling? Is that a factor in the new super fast searchs? I knew it was available before in one of the 10.2.x releases via a terminal command but that's it :blush:

Yeah i'd like to know that too, is it worth turning on?

What's the advantage of enabling journaling? Is that a factor in the new super fast searchs? I knew it was available before in one of the 10.2.x releases via a terminal command but that's it :blush:

i think its just the difference between it being on a pc like a ntfs partition vs fat32. it makes it easier to search for things and makes it easier to recover things if the OS coughs on you

Yeah i'd like to know that too, is it worth turning on?

I've found a few links regaurding it. Nothing from Panther, but it's been implimented (as Dazzla said) in Jag, you just have to turn it on from the Terminal.

You can look here for it's intro, here to learn how to turn it on, here to see what the register has to say about it, and the Official Apple PDF is here.

n/p

I always like to try and attempt to outdo Wickedkitten.  :laugh:

*Runs away before the ###### reads teh post*

LMAO :laugh:

The Kitten has spy's everywhere....... he WILL find you :doctor:

Oh dear, you should probably edit that post to read "she" before she comes back online :whistle: :D

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc). Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk. The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage. The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong. For systems that don't move I leave it turned off.

Fortunatly, she's having some issues with MSN again and I don't think she's been paying attention. ;)

Back on topic, have you noticed any performance gain after turning on Journaling?

Not as yet no, but I'm not doing anything intense yet... I'll give it a whirl in a min to see if anything has improved,

Although according to the links you gave me, it's more of a safety procedure than a performance enhancement.

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc). Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk. The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage. The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong. For systems that don't move I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argument :D

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc).  Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk.  The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage.  The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong.  For systems that don't move  I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argument :D

Wicked just hates the fact that most of her posts inspire arguments. Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho. Nice and easy to understand. thumbs_up.gif

Wicked just hates the fact that most of her posts inspire arguments.  Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho.  Nice and easy to understand.

You've so just started using SHE a lot since I messed up :cool:

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc).  Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk.  The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage.  The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong.  For systems that don't move  I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argument :D

Wicked just hates the fact that most of her posts inspire arguments. Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho. Nice and easy to understand. https://www.neowin.net/forum/html/emoticons...s/thumbs_up.gif

oi, get back on topic you. Post a screenshot of something.

Is it true that IE doesn't come installed in it at all?

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc).? Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk.? The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage.? The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong.? For systems that don't move? I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argum:Dt :D

Wicked just hates the fact that most of her posts inspire arguments. Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho. Nice and easy to understand. https://www.neowin.net/forum/html/emoticons...s/thumbs_up.gif

oi, get back on topic you. Post a screenshot of something.

Is it true that IE doesn't come installed in it at all?

No, because I didn't have that craptastic program on my system, I installed Panther, and there the bloody thing was. So, in the Dev Preview at least, it has I.E. installed.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Fresh CachyOS install with Niri - I guess it's a little orange, but I'm working on it
    • FastStone Image Viewer 8.5 by Razvan Serea FastStone Image Viewer is a fast, stable, user-friendly image browser, converter and editor. It has a nice array of features that include image viewing, management, comparison, red-eye removal, emailing, resizing, cropping, retouching and color adjustments. Its innovative but intuitive full-screen mode provides quick access to EXIF information, thumbnail browser and major functionalities via hidden toolbars that pop up when your mouse touches the four edges of the screen. Other features include a high quality magnifier and a musical slideshow with 150+ transitional effects, as well as lossless JPEG transitions, drop shadow effects, image annotation, scanner support, histogram and much more. It supports all major graphic formats (BMP, JPEG, JPEG 2000, animated GIF, PNG, PCX, PSD, EPS, TIFF, WMF, ICO and TGA) and popular digital camera RAW formats (CRW, CR2, NEF, PEF, RAF, MRW, ORF, SRF, ARW, SR2, RW2 and DNG). FastStone Image Viewer features: Image browser and viewer with a familiar Windows Explorer-like user interface Support for many popular image formats and PDF viewing True Full Screen viewer with convenient image zoom support and unique fly-out menu panels Crystal-clear and customizable one-click image magnifier Powerful image editing tools: Resize/resample, rotate/flip, crop, sharpen/blur, adjust lighting/colors/curves/levels etc. Eleven re-sampling algorithms to choose from when resizing images Image color effects: gray scale, sepia, negative, Red/Green/Blue adjustment Image special effects: drop shadow, framing, bump map, sketch, oil painting, lens Draw texts, lines, highlights, rectangles, ovals and callout objects on images Clone Stamp and Healing Brush Superior red-eye effect removal/reduction with completely natural looking end result Multi-level Undo/Redo capability Single click to switch between best fit and actual size mode Image management, including file tagging, rating and drag-and-drop to copy/move/re-arrange files Histogram display with color counter feature Compare images side-by-side (up to 4 at a time) to easily cull those forgettable shots Image EXIF metadata support (plus comment editing for JPEGs) Configurable batch processing to convert/rename large or small collections of images Slideshow with 150+ transition effects and music support (MP3, WMA, WAV...) Create efficient image attachments for emailing to family and friends Print images with full page-layout control Create fully configurable contact sheets Create memorable artistic image montages from your family photos for personalized desktop wallpapers (Wallpaper Anywhere) Acquire images from scanners. Support batch scanning to PDF, TIFF, JPEG and PNG Versatile screen capture capability Powerful Save As interface to compare image quality and control generated file size Run favorite external editors with one keystroke from within Image Viewer Offer portable version of the program which can be run from a removable storage device Configurable mouse wheel support Support themes (bright, gray and dark) Support dual-monitor configurations Support touch interface (tap, swipe, pinch) Support dual instances Play video and audio files (Third party codecs may be required for old versions of Windows) And much more... FastStone Image Viewer 8.5 changelog: Added support for SVG format Added Start importing automatically and Handle duplicate file names automatically options to the Import Photos and Videos tool WebP files can now be rotated and saved with a single click Enhanced dark theme support in the PDF viewer Fixed a bug where some links in PDF files were not clickable Other improvements and bug fixes Download: FastStone Image Viewer 8.5 | Portable | ~15.0 MB (Freeware) View: FastStone Image Viewer Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Yup, broke my comp… again. its times like this when I regret AMD. This just never happens on NV.
    • Huh? You're delusional calling the Steam Deck dead. It is so successful that it has sold out multiple times. Even after the price hike this year it sold out again with 24 hours of being back in stock. The demand is real and has not died down even after four years.
  • Recent Achievements

    • Rookie
      DaviKar went up a rank
      Rookie
    • Dedicated
      HidekoYamamoto94 earned a badge
      Dedicated
    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      160
    3. 3
      PsYcHoKiLLa
      110
    4. 4
      Michael Scrip
      85
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!