Recommended Posts

What's the advantage of enabling journaling? Is that a factor in the new super fast searchs? I knew it was available before in one of the 10.2.x releases via a terminal command but that's it :blush:

Yeah i'd like to know that too, is it worth turning on?

What's the advantage of enabling journaling? Is that a factor in the new super fast searchs? I knew it was available before in one of the 10.2.x releases via a terminal command but that's it :blush:

i think its just the difference between it being on a pc like a ntfs partition vs fat32. it makes it easier to search for things and makes it easier to recover things if the OS coughs on you

Yeah i'd like to know that too, is it worth turning on?

I've found a few links regaurding it. Nothing from Panther, but it's been implimented (as Dazzla said) in Jag, you just have to turn it on from the Terminal.

You can look here for it's intro, here to learn how to turn it on, here to see what the register has to say about it, and the Official Apple PDF is here.

n/p

I always like to try and attempt to outdo Wickedkitten.  :laugh:

*Runs away before the ###### reads teh post*

LMAO :laugh:

The Kitten has spy's everywhere....... he WILL find you :doctor:

Oh dear, you should probably edit that post to read "she" before she comes back online :whistle: :D

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc). Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk. The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage. The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong. For systems that don't move I leave it turned off.

Fortunatly, she's having some issues with MSN again and I don't think she's been paying attention. ;)

Back on topic, have you noticed any performance gain after turning on Journaling?

Not as yet no, but I'm not doing anything intense yet... I'll give it a whirl in a min to see if anything has improved,

Although according to the links you gave me, it's more of a safety procedure than a performance enhancement.

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc). Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk. The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage. The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong. For systems that don't move I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argument :D

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc).  Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk.  The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage.  The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong.  For systems that don't move  I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argument :D

Wicked just hates the fact that most of her posts inspire arguments. Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho. Nice and easy to understand. thumbs_up.gif

Wicked just hates the fact that most of her posts inspire arguments.  Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho.  Nice and easy to understand.

You've so just started using SHE a lot since I messed up :cool:

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc).  Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk.  The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage.  The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong.  For systems that don't move  I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argument :D

Wicked just hates the fact that most of her posts inspire arguments. Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho. Nice and easy to understand. https://www.neowin.net/forum/html/emoticons...s/thumbs_up.gif

oi, get back on topic you. Post a screenshot of something.

Is it true that IE doesn't come installed in it at all?

Journaling moves harddisk disk writes to a transaction based method.

On a normal file system (fat32, hfs) when you say "write this to the disk" the harddrive will start writting the data to the platter - overwritting files as it goes (i am intentionally ignoring caching etc).? Imagine you were writting an update to a critical part of the system and your system went down: you could lose everything on a disk or damage much data so you have to go and check the entire disk to make sure everything is okay.

On a trasaction based system (ntfs, reiserfs, hfs+) every write is first written as a transaction to a journal and then to the disk.? The advantage is that if a disk goes down down while writting the system can reboot and not have to worry about losing everything:it can playback the journal and bring the system to a known state.

It won't stop you from loosing data but it will make the recovery from a disk write failure faster.

It's basicly a way of making your disk more reliable in the event of power outage.? The performance hit is typically less than 10% for writting though no penalty for reads should be detectable (some say it makes it faster because the data is stored better on the disk - I don't believe them, but what do I know?)

I have journaling turned on for systems that spend most of their time unplugged because you never know what could go wrong.? For systems that don't move? I leave it turned off.

have i mentioned lately I absolutely love your posts. I like the way you are always concise and articulate in your giving of information and leave little room for argum:Dt :D

Wicked just hates the fact that most of her posts inspire arguments. Actually, she probably likes that because she would argue with a wall if it would have it.

That's very informative tho. Nice and easy to understand. https://www.neowin.net/forum/html/emoticons...s/thumbs_up.gif

oi, get back on topic you. Post a screenshot of something.

Is it true that IE doesn't come installed in it at all?

No, because I didn't have that craptastic program on my system, I installed Panther, and there the bloody thing was. So, in the Dev Preview at least, it has I.E. installed.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The Trump administration doesn't want you to use OpenAI's GPT-5.6 without its approval by David Uzondu Image via @realDonalTrump (X) As OpenAI prepares the release of its next model, GPT 5.6, the White House has instructed the company to limit the distribution of the software to a small group of government-approved partners instead of the general public, as it has done with previous releases. According to The Information, OpenAI Chief Executive Officer Sam Altman sent an internal memo to staff on Thursday explaining that the federal government will approve access "customer by customer" during an initial preview phase. Altman noted in the communication that this restrictive rollout is "not [their] long-term model" for software deployment, and the company plans to work toward a "more sustainable" distribution method later. CNN said that both OpenAI and the Trump administration view the capabilities of GPT 5.6 on the same level as Anthropic's Mythos and that government officials intend to "collaborate with frontier AI labs to develop shared approaches for addressing the challenges of scaling this technology." The latest restriction comes just weeks after the US Commerce Department decided to restrict Fable, a version of Mythos with extra safety "guardrails" to prevent users from exploiting software vulnerabilities. Not long after the release, though, researchers at Amazon found a way to bypass these restrictions, prompting an aggressive response from federal authorities. The government ordered Anthropic to cut off access for non-US citizens located outside the US, non-US citizens living inside the US, and incredibly, even Anthropic's own foreign-born employees. Anthropic now appears to be building a workaround to resolve this compliance block with an update to its Privacy Policy that introduces a category called "Verification Data" to handle KYC and Digital IDs. This setup could mandate digital identity checks to filter users by nationality, requiring a government-issued ID and facial biometric data. Who knows? Maybe in the future, you would have to scan your US Passport or State ID to prove your citizenship before you are allowed to chat with Fable 5 (or any other model).
    • When Windows 7 was released I created an AutoHotkey script that uses Alt+` as a keyboard shortcut to move a window across monitors. I have been using that script for over 15 years and this is the first time I have come across another app that uses the same shortcut!
    • I called it last year that they wouldn't end support when they said there would. There are too many people still on Windows 10 waiting for something better to upgrade to and 11 ain't it! The recent promises of fixing Windows 11's many problems is nice, but unless they deliver on those promises in a big way then I expect customers will still want to stick with 10.
    • Full ACK. I went too far adressing your post specifically. And as you said, it up to us customers as participant of the market dynamic as it happens to decide whether we spend our money on a product or not. The responsibility is to the company. In case of this price hike one could assume that MS is expecting or even starting to see a new interest in XBox hardware so they want to avoid losses per unit sold. I find it fair enough that they granted a period in which everyone interested could grab a unit for the current price (Amazon.de has a reliable stock of XBox Series X digital, which I bought last December after having sold my day one Series X a year ago). It is not that they cash up their customers starting on Monday. Cheers and let's cling to our perfectly fine hardware as long as we deem it worthy in relation to purchasing something new!
  • Recent Achievements

    • Week One Done
      xvvxcvv earned a badge
      Week One Done
    • One Month Later
      xvvxcvv earned a badge
      One Month Later
    • Enthusiast
      Xonos went up a rank
      Enthusiast
    • Conversation Starter
      Admir earned a badge
      Conversation Starter
    • First Post
      The_Focal_Point earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      412
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      129
    4. 4
      neufuse
      69
    5. 5
      Xenon
      68
  • Tell a friend

    Love Neowin? Tell a friend!