[Official] Fallout New Vegas


Recommended Posts

Yeah I'm running it on my xbox with the dlc I received from game stop. The only thing is that I didn't install the content till I got through a few missions. (Internet issues)

Hmmm, you are lucky then if you completed the quest and it didnt corrupt your games. I am skipping that quest for now until they fix the issue and I will go back to it later on.

On the 360, if you complete the quest "Come Fly Away With Me" every saved game after becomes corrupted. You try to continue and the load freezes the XBOX. You try and LOAD, and you get an error about the DLC content being missing and you cannot load the game.

This does not happen to everyone so this quest is not the exact problem to the corrupt save issue that they are addressing in the next update coming to the 360.

The best advice for anyone playing this game and obviously wanting to avoid corrupt saves or experiencing them every so often, is to save around every 10 minutes or crucial points (before and after) and make sure to save outside in the world of Fallout. Do not rely on the auto save feature, keep it enabled as it could end up saving you one time in case the game does freeze and it does not corrupt your save (it does not always--50/50 chance it will).

I say to make sure to save outside, because you could come to a point in the game where you cannot exit the location you are at because all it does is give you a black screen of death (freeze) when you exit the building. This is an issue going on too, my brothers Hardcore save nearly near the end of the game has this issue in the Gomorrah Casino (not saying this would happen to everyone either--just a warning to make sure to save outside a location). We've tried everything too to get out of the building without it freezing from getting rid of the 2 companions to dropping absolutely everything being carried to disabling auto save since we are exiting the casino to god knows what else. Who knows if Bethesda will be able to fix this problem for saved games already, be it this particular problem for me brothers or just someone else having a similar issue.

I was at the NCR Outpost and inside the building where you can get supplies and get your weapons mended (if they are broken) if you walk through the offices there are soldiers standing around or sitting down at desks. Well I came across this one sitting at the desk and you can clearly here the keyboard clicking away but somebody forgot to add a computer and the solider is typing on the desk...?

I found out something within Vegas which I do believe was the same as in Fallout 3, did you know you can drink out of the toilets if you are short of water, Quite revolting to say the least but you can.???:x

?

Now this crazy chick at hoover dam wants me to kill everyone at the brotherhood after i have befriended them (which sucks)

I thought the same thing when I got there, however if you're on "liked" terms with the Brotherhood you can convince them to join the NCR at Hoover Dam as support. I didn't overthrow the elder so I'm not sure if they'll still join the NCR if you left the other guy in charge.

I had a fairly high speech skill, but I don't recall it being a [speech] option, so I'm not sure if that matters or not.

I thought the same thing when I got there, however if you're on "liked" terms with the Brotherhood you can convince them to join the NCR at Hoover Dam as support. I didn't overthrow the elder so I'm not sure if they'll still join the NCR if you left the other guy in charge.

I had a fairly high speech skill, but I don't recall it being a [speech] option, so I'm not sure if that matters or not.

I'm liked by both of them The Brotherhood and the NCR, but i got the elder overthrown for Hardin, i will try to plead to these two to join forces if i can (Hopefully) cause i have 100 Speech and if i can't well Me, Boon, & Rex my (RoboDog) are going tear up The Brotherhood bunker so i can just finish the game.

Crashing and save game corruption lol.

I'm so waiting for the GOTY edition with DLC/patches. That being said currently hooked on Fallout 3, and every now and then it still screws up after a legion of patches.

D'oh, I managed to get the Platinum Chip before Mr House told me where to find it. Damn my exploration skillz! Still, I need to get some sort of outfit to cut back that radiation I'm getting from the weather station bit.

I don't want to get to the end of the MQ so soon, I'm assuming there's much more going on after all this. xD

This does not happen to everyone so this quest is not the exact problem to the corrupt save issue that they are addressing in the next update coming to the 360.

Happens to a lot of people including me with that one quest. annoying as hell because I tested it. All I have to do is go to the control tower to finish the quest. So I saved the game, finished it, and then tried to load the saved game...it would not load.

I have pretty much done everything I can do and need to finish this quest to continue the game.

As for the Come Fly With Me Quest, I did every part of it without a single glitch or issue. My save corrupted much earlier on, just after I first spoke to Boone in the dinosaur mouth. Crashed as I turned and re-entered the Gift Shop. :[

Ah well, all is well now.

As for the Come Fly With Me Quest, I did every part of it without a single glitch or issue. My save corrupted much earlier on, just after I first spoke to Boone in the dinosaur mouth. Crashed as I turned and re-entered the Gift Shop. :[

Ah well, all is well now.

Lucky, I wish i could complete the Come Fly With Me quest. I keep trying and nothing. Keeps saying I am missing the DLC when I try to load the game.

Lucky, I wish i could complete the Come Fly With Me quest. I keep trying and nothing. Keeps saying I am missing the DLC when I try to load the game.

Has anyone tried selling the armor and gun you get with the DLC and then try the quest? Maybe if the DLC info is not in your inventory, it will find what it needs.

^ About the "Come Fly With Me" quest: Had no problems with it either. I even quick saved just before the launch, to try all the options (crash or not to crash the rockets) to see what happens.

Just got a showstopper bug where I can't finish the mission where you have to raise the b-29 plane, the detonator is doing nothing :(

Did that mission. You need to make sure you use the detonator at the shore, on the specified spot marked by the quest marker.

In other locations it doesn't do anything. The marked location also gives you a nice viewing spot, on the plane rising from underneath the water.

Just got a showstopper bug where I can't finish the mission where you have to raise the b-29 plane, the detonator is doing nothing :(

Are you standing in the right place?

I wasn't sure, but I got out of the water by the dock where the arrow was and it started beeping, so I don't know if there is a place you have to be to do it.

Are you standing in the right place?

I wasn't sure, but I got out of the water by the dock where the arrow was and it started beeping, so I don't know if there is a place you have to be to do it.

Yeah I am, I'm standing beside the wrench and it's beeping, but once I use the detonator nothing happens, no matter where I do it :(

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I can answer about the Linux bit. I only used AMD GPUs. I currently have a 9060XT (8GB) that fits my needs, I'm not a gamer, so I don't need that much GDDR. But lately, NVIDIA has grown a lot in the recent years. Oh, the horrors of NVIDIA drivers not working. But they have been getting better. I know a lot of members onm here that are running cachyOS and other distros, and are fine with a 4090/5090 variants. Really, though, I would stick with AMD variants.
    • Everything they say you can already do yourself on the registry by changing some things.
    • Artist's renderings are so much nicer to view than the real thing, don't you think?
    • WildBit Viewer 6.20 released; no further updates planned by Razvan Serea WildBit Viewer is a popular, fast, and extensive image viewer offering a comprehensive suite of tools for photographers, designers, and image enthusiasts. It includes a powerful Viewer, Slide Show, Editor, Search, Profile Switcher, and Multi-Screen Viewer. The Viewer provides blazing-fast folder, file list, and thumbnail navigation with customizable headers, full-screen view, and a shell toolbar to organize favorite folders. It supports all major graphic formats (over 70), including JPEG, TIFF, PNG, BMP, GIF, PCX, TGA, and RAW formats. Detailed Image Info shows EXIF, IPTC, and XMP metadata, with rotation based on EXIF orientation, wallpaper setting, image comparison, geo-tag viewing, color labels, and CMS-aware color management. The Slide Show module offers 176 transition effects, multi-monitor support, custom shows with per-image settings, image marking, zoom, rotate, and desktop hiding for a professional viewing experience. The Editor supports advanced image manipulation, including crop, resize, color adjustments, curves, edge detection, effects, batch processing, retouching, layer support, and printing. Users can apply mass renaming, update or clear metadata, and work with multi-page TIFFs and animated GIFs. Search allows filtering by name, location, date, size, attributes, and metadata, while the Profile Switcher saves and loads custom layouts for all modules. The Multi-Screen Viewer opens multiple windows on available monitors, allowing simultaneous image viewing with independent zoom, pan, and rotation. WildBit Viewer also supports portable operation, 32- and 64-bit versions, Unicode, high-DPI displays, and multiple Windows styling options. With its combination of speed, versatility, and rich feature set, WildBit Viewer is an indispensable tool for managing, editing, and showcasing images efficiently. WildBit Viewer key features: Blazing-fast folder, file list, and thumbnail browsing Supports 70+ image formats including JPEG, TIFF, PNG, BMP, GIF, and RAW Full-screen view with multi-monitor support Explorer-style file handling with customizable headers Thumbnail Browser with sorting, view change, and fast size adjustment EXIF, IPTC, and XMP metadata viewing and editing Automatic rotation based on EXIF orientation Shell toolbar for organizing favorite folders Image Compare to calculate similarity between images Mass renaming and batch metadata updates File List Generator (HTML, CSV, RTF, TXT, Unicode) Rating and color labels, CMS-aware color management Video playback (AVI, MPG, MPEG, WMV) Animated GIF, multipage TIFF, Camera RAW support Slide Show with 176 transition effects and custom settings Editor: crop, resize, rotate, flip, canvas resize, and retouching tools Batch processing and image format conversion Multi-Screen Viewer: multiple windows with independent zoom, pan, and rotate Profile Switcher: save, load, reset, delete module profiles Portable operation, 32-/64-bit support, Unicode, and high-DPI ready WildBit Viewer 6.20 changelog: Viewer, Slide Show, Editor, Search, Profile Switcher & Multi Screen Viewer. Updated ImageEn to 15.0.0 version. Viewer, Slide Show, Editor, Search, Profile Switcher & Multi Screen Viewer. Updated Jedi JCL&JVCL. Viewer - Image Geo Info, OpenStreetMap removed. Slide Show Remote Mode removed. Note! This means that WildBit Slide Show Remote is now officially EOL. Editor - Shortcut keys for Capture removed. Optimized code. Note! This version includes help what supersedes all previous releases. plus Lots of bug fixes and changes, check Readme files for details. WildBit Viewer End‑of‑Life WildBit Viewer has reached its final release with version 6.20. As development comes to a close, no further feature updates are planned. WildBit Slide Show Remote reached End-of-Life on 06 June 2026, while WildBit Viewer will reach End-of-Life on 30 June 2026. Downloads will remain available until the end of July 2026 (possibly extending into early August). After End-of-Life, the software will no longer receive updates, security fixes, or technical support. Download: WildBit Viewer 64-bit | Portable 64-bit | ~70.0 MB (Freeware) Download: WildBit Viewer 32-bit | Portable 32-bit Links: WildBit Viewer Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Thanks for liking it! 😊 That's Arch Linux with Gnome.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      252
    3. 3
      Steven P.
      71
    4. 4
      +Edouard
      69
    5. 5
      FloatingFatMan
      68
  • Tell a friend

    Love Neowin? Tell a friend!