HP wants their 17'' LCDs back


Recommended Posts

I have similar experience with Everglide (the mouse pad company).

After I got my product, I was told they made a mistake on the shipping charges and wanted to charge me extra.

The amount I was charged was already quite hefty and they had the guts to want to charge me more.

I basically told this company to fxxk off and I confirmed with my credit card company that they cannot do this.

Just got another email from HP. They have seen the error of their ways. They will honor the reduced price for those who received them. Good for them and us.

Thank you for the recent purchase of your FLAT PANEL MONITOR L1702 for $199.00 from HP.com.  We recently discovered that your monitor was offered at a reduced purchase price in error, and subsequently, you may have received a request to either return the monitor or pay the difference. Please disregard the previous communication and accept our sincere regret for any inconvenience this may have caused. HP values the relationships we have with our customers, and as such, we will honor the reduced price.  We appreciate your business, and hope you will consider HP again for your future technology purchases.  If you have any questions or comments, please contact 1-800-888-0292.

Deborah Goodlette

HP SMB Billing

--

EHANSON

It isn't a Neowin exclusive, but dougkinzinger alerted the Inquirer, I have never received any e-mail from HP about the pricing error. I don't think the Inquirer had major impact on HP. Either ways legally HP couldn't get us to send our monitors back or charge us extra.

Didn't Best Buy try and pull the same stunt.

Just to recycle people's memories: http://slashdot.org/article.pl?sid=02/04/24/1818210 . I wasn't involved. I just have a good memory ;)

AFAIC, if the product was shipped and was billed on your credit card, then the product was paid for in full. Its HP's fault they didn't check the price. And its REALLY bad customer service to try and bully people to cough up the extra dollars after they paid for the product and HP shipped it.

Check for details on the Best Buy story as to where the law stands. There should be some helpful tidbits.

Looks like HP wised up and realized they were just gonna get a bunch of bad press if they continued to pursue that course.

And regarding that LCD on Circuit City and the 14ms response time. As far as I know there is no LCD with a response time lower than 16, I know a Planar 17 incher and maybe a Samsung have the 16ms reponse time. I saw this monitor discussed on another forum and it was found that the 14ms is actually the reponse time rise or fall or whatever, and the other is 16ms. So the REAL response time on that monitor is actually 30ms. (combined rise and fall response times)

Just got another email from HP. They have seen the error of their ways. They will honor the reduced price for those who received them. Good for them and us.
Thank you for the recent purchase of your FLAT PANEL MONITOR L1702 for $199.00 from HP.com.? We recently discovered that your monitor was offered at a reduced purchase price in error, and subsequently, you may have received a request to either return the monitor or pay the difference. Please disregard the previous communication and accept our sincere regret for any inconvenience this may have caused. HP values the relationships we have with our customers, and as such, we will honor the reduced price.? We appreciate your business, and hope you will consider HP again for your future technology purchases.? If you have any questions or comments, please contact 1-800-888-0292.

Deborah Goodlette

HP SMB Billing

--

EHANSON

Yup, I got that e-mail as well...though the colors this "Deborah" used for her e-mail style seemed to be Christmas color:huh:uh:

Kind of like selling your friend a basketball card for $100 when it's really worth $150, then crying to him saying "I want the extra $50"

Except HP is not your friend. In fact, HP is noone's friend. HP has no friends. They tried buying a friend named Compaq, but they were so zealous they swallowed him up (no big loss, compaq SUCKED)

BTW guys, I just read all 10 pages of posts and I totally agree that HP is full of crap on this one and I'm right with you :cool:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Microsoft will finally let you sign in to Edge with a Google account by Usama Jawad As things currently stand, Microsoft Edge only allows you to sign in to the browser with a Microsoft Account (MSA). This allows you to sync your browser settings and other data across other devices, as long as you sign in with the same account. However, Microsoft is now modifying this mechanism in a way that will likely please many users. In an update to its Microsoft 365 Roadmap, Microsoft has indicated that it will soon let users sign into Edge using a Google account from the profile menu and the Edge sign-in screen. This will be in addition to the MSA login option, and it opens up new doors for people who prefer using Edge, but cannot be bothered to configure a Microsoft account. This brings several advantages such as the ability to sync your data across devices using just a Google account. It may even facilitate flexible single sign-on (SSO) experiences where you can quickly login to websites and services through a single Google account that is presented as the preferred sign-in option. Up until now, Microsoft allowed customers to indirectly use a Google account, by configuring a Google account as a Microsoft account, or by setting up a one-way sync option between Edge and Chrome. This is a rather interesting development, especially considering that Google Chrome still limits you to a Google account sign-in, but it will be interesting to see if the company reciprocates Microsoft's gesture in the future. This is not the only recent instance in which Microsoft has extended a handshake to Google via Edge. In April 2026, it began tracking the development of a work search banner for Google Search queries, just like the one present in Edge. However, if we go back almost seven years, to January 2020, Microsoft had emphasized that it had no plans to "integrate Google services into Microsoft Edge by default", in response to people requesting Google sign-in services on Edge. Fast-forward to today, and Microsoft is planning to release this feature in July 2026, with IT admins having the option to control its availability on Windows and macOS through the NonMicrosoftAccountSignInEnabled policy.
    • If they ever come out and say the AI is no longer accessible to the gen pop people aren't going to know how to tie their own shoelaces.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!