Neowin.net Minecraft Server (Old Server)

By Timan
in PC Gaming

 Share
Message added by Brandon H,

Come join the new Minecraft server discussion thread :)

 

 

Recommended Posts

Grand Master

Lingwo

Posted
Posted

We could really use some screenshots of some of the builds on any of the worlds. Anyone up for the task?

I did do a load but then looking back at them, the HUD look a bit too much.

So then i read F1 removes the HUD, so i will redo them. They are going to be 1.5MB each. I might have to convert them to jpg, that should make them smaller.

Grand Master

Chasethebase Veteran

Posted
  • Veteran
Posted

The Minecraft Redstone Update is coming on Wednesday, March 13

The change log is as follows?

  • Added Redstone Comparator (used in Redstone logic)
  • Added Hopper (collects items and moves them to containers)
  • Added Dropper (similar to Dispensers, but always drops the item)
  • Added Activator Rail (activates TNT Minecarts)
  • Added Daylight Sensor
  • Added Trapped Chest
  • Added Weighed Pressure Plate
  • Added Block of Redstone
  • Added Nether Brick (item)
  • Added Nether Quartz and ore
  • Added Block of Quartz, with half blocks and chiseled variants
  • New command: /scoreboard
  • New command: /effect
  • Containers and mobs can have custom names
  • Inventory management has been changed, for example you can drag-place items over slots
  • Texture packs now have separate images for each block and item, and can have animations
  • Nether Quartz Ore now spawns in the Nether
  • Smooth lighting now has three settings (none, minimal, maximum)
  • More detailed death messages
  • Some hostile mobs now are harder in Hard difficulty
  • Many, many, bug fixes
  • Removed Herobrine

Rising Star

ShadowMajestic

Posted
Posted

Someone go to the end (ender trap) and knock a few blocks out of that area where its flooding now. Don't knock a hole in the floor though.

I'm being kicked constantly for flying (or retarded

I guess it should've stayed hidden :p

^ which means waiting with the client update until the server and all plugins are updated. Wait for Timan to tell you it's safe to update to 1.5.

Any idea for an ETA after release or? Havent played MC before this, usually it takes days? weeks? months? centuries?

Grand Master

Lingwo

Posted
Posted

Yes it does seem to be down. Usually it comes back in 10-15 minutes.

Is it just me or does the backup go on forever and while it is working it lags the server and prone to crashing.

Yesterday i got kicked twice when the backup started and the server was unreachable for about 20 minutes.

Grand Master

CPressland

Posted
Posted

Yes it does seem to be down. Usually it comes back in 10-15 minutes.

Is it just me or does the backup go on forever and while it is working it lags the server and prone to crashing.

Yesterday i got kicked twice when the backup started and the server was unreachable for about 20 minutes.

Yeah, sometimes the backup handler breaks things; I had a similar issue on my old Server, thankfully I had the interval set to once every 24 hours. But I understand why Neowin needs to backup often.

Grand Master

Lingwo

Posted
Posted

Yeah, sometimes the backup handler breaks things; I had a similar issue on my old Server, thankfully I had the interval set to once every 24 hours. But I understand why Neowin needs to backup often.

Is it a timed interval?

It has always felt random to me. Like when a certain amount of blocks are removed/placed it starts a backup.

Always seems to do it at the worst possible time for me either way. :laugh:

Rising Star

ShadowMajestic

Posted
Posted

Is it a timed interval?

It has always felt random to me. Like when a certain amount of blocks are removed/placed it starts a backup.

Always seems to do it at the worst possible time for me either way. :laugh:

Yeah it was every 10-15min or so before, Timan already slowed it down to once every 30min or so. But even on crashes back when i login i'm where i was (or very close) and not at places when the backup was taken :/ But I have noticed little lag during backups since the resource expansion :)

Working on it

Cool.

While your around, any ETA for 1.5?

Oh and if you get to it, please spawn 2 or 3 ender dragons :D

Oh and it was yesterday i think when anad and bsarmir where online (maybe during the night or evening before) when the map already started having issues, failed to load entirely on IE, and it basically crashed when i tried to zoom in or move around the map. Turned into a black screen.

Maybe somewhat usefull, maybe not :)

Grand Master

Brandon H Supervisor

Posted
  • Supervisor
Posted

Cool.

While your around, any ETA for 1.5?

the eta for 1.5 will depend on when bukkit can get a stable 1.5 server out (or beta depending) and if any plugins being used break with said update

so I'd guess 3 weeks to a month and a half after 1.5 goes final till the neowin server can update

Veteran

Louisifer

Posted
Posted

Great I updated mine to 1.5 by accident and now cannot get onto the server.. anything I can do?

Replace the existing minecraft jar with this one from minecraft.net site :)

http://assets.minecraft.net/1_4_7/minecraft.jar

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • Still using Classic Outlook? Microsoft highlights 15 reasons to switch to New Outlook

      By margrave · Posted

      It STILL has horrid theme support. Hard to look at for me. The white is too bright, and the black too dark. I'm using classic outlook for the Dark Grey theme. It's just right for me.
    • Cuktech 10 Ultra charger review: big display, four ports, 110W total power

      By David Uzondu · Posted

      inb4 someone leaves the usual "what an unfortunate name" comment
    • Cuktech 10 Ultra charger review: big display, four ports, 110W total power

      By TarasBuria · Posted

      Cuktech 10 Ultra charger review: big display, four ports, 110W total power by Taras Buria Cuktech recently announced a couple of Ultra-branded chargers, including a desktop 300W charger, which I reviewed a few weeks ago. For those who do need that much (or who do not want to spend that much on a charger), Cuktech also offers the 10 Ultra, a traditional wall charger with similar features. Four ports, a big display, and up to 110W of power output. After using it for a few weeks, here are my impressions. Disclaimer: Cuktech provided the review unit without any editorial input or pre-approval. Like the 30 Ultra, the 10 Ultra arrived in a box made of nice cardboard with quality print all over it. Inside, besides the charger, you will find a 240W 6A charger, which, this time, is fully braided. While Cuktech always bundles high-power cables with its chargers and power banks, they are usually regular and unassuming. This time, the cable is much nicer, matching the charger's $59.99 price tag. The charger itself measures 67 x 76 x 33 mm or 2.6 x 3.0 x 1.3 inches and weighs about 250 grams. Considering the charger has four ports and a big display, I would say the compact size is quite impressive, albeit a little hefty. The overall design is similar to other chargers from the manufacturer, minus the chrome Cuktech logo next to the four ports. The Cuktech 10 Ultra has retractable prongs for better portability. Its front side is covered with piano black plastic housing two elements: a capacitive button with backlight and a quite large display for various charging stats. Ports are downward-facing, and I have mixed feelings about such a design. It is not the most convenient when you frequently connect and disconnect cables. It makes you bend over to find the right port to connect, and it is a no-go with outlets mounted closer to the floor. On the bright side, design like this eliminates clutter and sagging, especially when using four cables at once. Plus, you get plenty of space for a big display. Ports include two high-speed USB Type-C ports, one Type-C for less demanding devices, and one classic USB Type-A. The first two ports deliver full 100W, while the third is capped at 45W. As for the Type-A port, its maximum output is 18W. In total, the charger delivers 110W of power, but in my testing, I managed to squeeze 117W when charging two power banks and a tablet. Quite impressive. Type-C1 Type-C2 Type-C3 Type-A Single-port 100W 100W 45W 18W Two ports 80W 20W - - Three ports 65W 20W 20W - Four ports 65W 20W 10W 10W The charger can detect handshake protocols and balance power across all four ports according to each device's needs. As such, power is not limited to the values in the table above. You can have two ports charging at 55W, three ports at 45W + 20W, and more. For some reason, Cuktech is not listing the supported protocols, but a quick test showed that it is compatible with PD3.0, PPS, QC5, DCP, and UFCS. When you connect a compatible device, the charger automatically detects its charging standard and displays it on the screen, for example, Apple 6A or Samsung 3A. Speaking of the screen. The main highlight of the 10 Ultra is its 1.57-inch display with a maximum brightness of 700 nits and 160-degree viewing angles. The display takes up most of the front, and it shows various charging-related information, including total output power, current temperature, power distribution across ports with watts, volts, and amps, a screensaver, and more. You can toggle between the different views by tapping the button, and holding it changes the screen orientation (portrait or horizontal, plus flipped) according to your socket position. The screen is very nice. It is sharp, vivid, and the fonts are easy to read. As for settings, you can change the following: Keep the screen on or off Lock the screen orientation (hold the button to change the screen orientation) Keep the USB Type-A port on Toggle power modes The charger has three power modes: AI: standard mode that automatically allocates power to each connected device. Power Priority: prioritizes power for high-demand devices, such as laptops or power banks. Balanced: splits power evenly across connected devices according to their needs I was skeptical at first, but after testing a few devices in different modes, I can see the benefit of these three modes. The most useful is power priority, which gives the first Type-C port more power. When I was charging a 100W power bank (port 1) alongside a 140W power bank (port 2), Power Priority split the total output about 75-30. Balanced mode, as the name suggests, splits the total output between the two ports more or less equally. As for AI mode, the charger uses its brain to detect which device needs more power. In my testing, it figured out that the 140W power needs a bit more juice. As I said, I expected this to be more of a gimmick, but the three built-in modes turned out quite useful. For example, you can prioritize your laptop while giving other ports a little less power, but still enough to charge at acceptable speeds. Unfortunately, unlike the 30 Ultra, this charger cannot display the battery level of the device being charged. This small feature turned out to be very useful when I was testing the 30 Ultra, as it allowed me to see my phone's battery level without picking it up. Like other Cuktech chargers I tested, the 10 Ultra one proved itself reliable and well-made. It uses Gallium nitride semiconductor technology to reduce the charger's size and improve efficiency. It is also better at dissipating heat, but I have to say that when charging two power banks at 117W total, the charger got hotter than what I would call comfortable (hold it for a few seconds, and you start feeling a burning sensation at your fingertips). However, the built-in thermal indicator remained below the temperature threshold, with the screen reassuring that the device operated at "High performance" (I tested it in a 21 °C / 69 °F room). Overall, the Cuktech 10 Ultra is a solid choice. If you need four ports and you like to nerd out on various stats, it is a very easy recommendation. It will take care of your laptop, phone, tablet, and power bank without breaking a sweat, plus the build, material, and cable quality are top-notch. The mode switcher is handy when charging different devices with different power needs, too. I cannot say a display is a must-have in a charger, especially when it makes you more conscious about where to plug it, but it is a neat addition if you have a socket at your table or bed level, so that you can actually use the display and its features. The more important fact is that despite its size and quality, the display does not make the charger that much more expensive than similarly powerful chargers from competitors. Plus, you can save 10% on the 10 Ultra with a promo code on Amazon. Buy Cuktech 10 Ultra charger - $53.99 on Amazon with a promo code As an Amazon Associate, we earn from qualifying purchases.
    • Still using Classic Outlook? Microsoft highlights 15 reasons to switch to New Outlook

      By SystemX2 · Posted

      Last week I was investigating an issue with contacts and tried using the new Outlook. In the real (Classic) Outlook, you can easily go to any Outlook folder and present it in a Table View, then customize the columns to show/sort any field, which was exactly what I needed. But of course, the new Outlook doesn't have this feature at all. I gave up. Oh, and can we possibly stop claiming the new Outlook has PST support? What it really has is the ability to use the real Outlook in the background to pretend to have PST support. There is no PST support without the real Outlook installed.
    • Here is the new Surface Laptop Ultra wallpaper in high resolution

      By AltecXP · Posted

      Honestly just before Panos left it started to feel like MS just wasnt interested in them so they were being less innovative with them, and then when he DID leave for Amazon its kind of clear the direction is gone. It felt like Panos had both goals and drive, and a vision, but it felt like no matter what his title/department was the Surface devices never had the full interest of the rest of management and he was just pushing a bolder up a hill that MS was adding dirt to as he went.

  • Recent Achievements

    • Conversation Starter
      mobandz earned a badge
      Conversation Starter
    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In

  • Popular Contributors

    1. 1
      +primortal
      477
    2. 2
      PsYcHoKiLLa
      247
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      76
    5. 5
      Michael Scrip
      60
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!