Recommended Posts

Hiya,

I have tried it on a x64 machine: it does not work.

I got the message: The application has failed to start because the application configuration is incorrect. Reinstalling the application may fix the problem.

585836358[/snapback]

I get the same exact error.

WinXP x64

AMD64 2800+

thank you guys for testing the 64bit version. I know what is causing that error..but there is more to it than I thought. So I need to install 64bit windows to debug lclock. But I can't do that until hp release the 64bit driver for my printer. :(

585845866[/snapback]

depending on how old that printer is... it may never happen. blech...

how about dual-booting??? ;)

thank you guys for testing the 64bit version. I know what is causing that error..but there is more to it than I thought. So I need to install 64bit windows to debug lclock. But I can't do that until hp release the 64bit driver for my printer. :(

585845866[/snapback]

What is your printer? We can always check if XP 64 has built-in drivers.

Ok, I have installed win xp x64 and the printer is in the trash can for now. :p

This will run..but I haven't tested it much. So let me know if you find bugs.

http://www.sfu.ca/~yhana/lclock/LC64.rar

Oh read the readme.txt for installation instructions

rj2k: sorry, been playing too much and working on porting the code to 64bit.

This will run..but I haven't tested it much. So let me know if you find bugs.

http://www.sfu.ca/~yhana/lclock/LC64.rar

Oh read the readme.txt for installation instructions

585854458[/snapback]

So far, very good, it's working like a charm on Windows x64.

Thank you for your hard work

  • 2 weeks later...
I would like sourcee code from this program.

since the orignal author of TClock Light released source code.

I think you should do too.

585980233[/snapback]

message me and I'll talk to you about getting the source.

Last update was 1.62 from September 2004. Any plans for a new release, or is this it?

In any case, this is a great application that I don't want to live without with!

THANKS!!!! :D

585994423[/snapback]

sorry guys.. I been busy with school and slacking off in my free times. :(

Can't say when I'll get back to LClock again...but if I do anything I'll let you guys know..

Hey RCube,

I found a bug. When I created a reminder for "June 29, 2005" (Message: Blah, Time: 00:00, Type: Single) and pressed OK, a new reminder window opened with the Title/Date "June 31, 2005" (Message: no message, Time: whatever the current time is on the PC, Type: Single). I am using the latest version 1.62b(Win32).

  • 2 weeks later...

I have placed very many reminders and the Event.ini file is over 10kb large.

It seems i cant add any more reminders to the program! They just wont show up when i double click!

Ive added my event.ini so that you can check for bugs and update the program!

Otherwise i love it!

Events.zip

I have placed very many reminders and the Event.ini file is over 10kb large.

It seems i cant add any more reminders to the program! They just wont show up when i double click!

Ive added my event.ini so that you can check for bugs and update the program!

Otherwise i love it!

586058836[/snapback]

I have tested lclock with your event.ini file. And I can add more events to it. "wont show up when double click", do you mean the event editor window doesn't popup anymore?

I can't figure out how to set reminders to begin with, I don't see anything about them in the properties.

586059047[/snapback]

click on the clock so the calendar opens. Then double click on any of the date to open the event editor for that day.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, From looking at the screen shots in your motherboard's manual at https://endownload.colorful.cn/EnDownload/MotherBroard/2022/Intel 600/Manual/Intel 600 Series BIOS English/Intel 600 Series BIOS User Guide.pdf, you go to the ADVANCED option at the top of the BIOS (UEFI) menu, then select SECURITY in the list of options on the left.  From there  you can enable and set the Secure Boot mode. Regards, Aryeh Goretsky  
    • Final Fantasy VII Remake Part 3 is getting a simultaneous release across PC and all consoles by Pulasthi Ariyasinghe Square Enix showed up to the Summer Game Fest presentation today with multiple trailers showing off its next chapter in the Final Fantasy VII Remake saga. The final chapter of this trilogy now has an official name too, with it being dubbed Final Fantasy VII Revelation, following up Final Fantasy VII Remake and Final Fantasy VII Rebirth from recent years. Vincent Valentine, Cid, Cloud, Barret, Tifa, and more showed up in the trailers as they battle against enemies, or 'Weapons,' from the final chapter. "As the world teeters on the brink of annihilation, the final battle against Sephiroth begins," says the trailer description. "A meteor mars the sky, monstrous planetary guardians wreak havoc across the globe, and the fires of war rage. Now, Cloud and his companions must stand against this chaos to not only decide the planet's fate, but bring a legendary conflict to its conclusion." Following the reveal trailer, the show also dropped some gameplay footage that shows off a new way to travel across the open world using the Highwind airship. Players will be able to swap characters on during battles, use tactical mode to synchronize with allies, and summon their entities. Cid Highwind and Vincent Valentine are joining the party this time too. “FINAL FANTASY VII, first released in 1997, has been beloved by fans for many years and has since become a “legend” in its own right," added producer Yoshinori Kitase. "The FINAL FANTASY VII Remake Series that began in 2020 with everyone’s passionate support is finally reaching its climactic finale with FINAL FANTASY VII REVELATION. The story’s final destination represents my emotions spanning thirty years working on this title" One of the biggest revelations of this announcement, however, was the multiplatform release confirmation from the get-go. Square Enix will be releasing Final Fantasy VII Revelation across PC, Xbox Series X|S, Nintendo Switch 2, and PlayStation 5 in Spring 2027 without any timed exclusivity programs.
    • Hello, Having a simple utility to allow Microsoft's customers to configure the context menu, with a few options like showing the current menu, showing a proposed menu/alternate configurations, loading and saving the settings, and a "reset to default" option would have solved this. Let Microsoft provide a recommended default look-and-feel, maybe a couple alternative configurations, like a basic/simplified version of that, and a more advanced version for that, and that would have been very well-received, I think. Microsoft could even had offered a library of different configurations, similar to what they have done in the past for Windows Media Player skins, Themes, and desktop wallpaper. Regards, Aryeh Goretsky
    • No Steam release. It's gonna fail on PC. Even an Epic Online engineer said that people go there for the free stuff and then immediately go back to Steam.
    • Nice. Admittedly, his other games never interested me, but this seems pretty cool.
  • Recent Achievements

    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      482
    2. 2
      PsYcHoKiLLa
      269
    3. 3
      Skyfrog
      78
    4. 4
      Steven P.
      68
    5. 5
      +Edouard
      61
  • Tell a friend

    Love Neowin? Tell a friend!