[Review] Logitech z-5500


Recommended Posts

These speakers are awsome.  I have them set up as my home theater.  They match my 51" Toshiba widescreen perfectly (silver and black).  I have listened to many movies and lots of music.  For anyone who has them...  number one recommendation is................. watch "TOP GUN" on dvd.  You will be grinning from ear to ear from the first scene.

584947625[/snapback]

I dont have topgun dvd :(

im not totally feeling these speakers

they dont seem like much of an improvement over my old ones which were cheap $100 speakers

so what am i doing wrong

i have an audigy 2 and im using 6 channel direct

i mean it sounds good but i was expecting better

584989179[/snapback]

first off, the bottom line is sound is personal and its always about what *you* preffer...i have found alot of people who dont like the woofer on this set as much for eg, as it doesn't hit as hard as the 680's one... but like i say to them, you can always turn it up :p

there are many reasons why it may not feel like an improvment, but heres a few...

1) volume... these speakers with there power come into there own if you crank em, if you dont like it loud or are unable to crank it (any kind of noise restrictions) well it then comes down to the quality of your source, for eg ...

2) music... esp mp3's... anything around 128/192kbit is considered "cd quality" for low-end systems, but for these you can certainly hear a difference at 256kbit+ over 128/192kbit (again tho, you'll notice it more when you crank it up a lil)

3) games... this is generally a good test, but alot of games dont have high quality sound, i found doom3 for eg with surround sound turned up to be very nice indeed

4) DVDs... this is the BEST test i think you can perform to check out the real difference these speakers can offer you, find a nice DTS supported dvd and play it through the speakers and i think then you might feel the difference

there are lots of other things you can do... but long as all the speakers are outputting sound (and you havn't mixed up say the woofer/center... that sounds pretty bad) and connected right, what you are hearing is what you get :)

and if you still dont like them, i can only suggest returning or onselling them...

also, what were the $100 set that you had before?

thanks for the input

i think its gona take some time to get into these

i havent gone beyond the third full volume block yet so i havent tried putting them loud, so i guess thats where its all at

so far i think it depends on the music i listen to

i usually listen to hard rock but i tried some techno and i think the sytem really shines in that

unfortunately i dont have a dvd player or a dvd rom drive so i dont think i can listen to dvd audio

i wouldnt return them cause im still happy with them but i think i was expecting too much

the control center looks so sweet

i havent tried them with any sound powerful game (like call of duty) yet so....

so tomorow il try it really loud

these are my old speakers

http://www.altecmm.com/product_details.asp?pID=251

they sounded pretty good

thanks for the input

i think its gona take some time to get into these

i havent gone beyond the third full volume block yet so i havent tried putting them loud, so i guess thats where its all at

so far i think it depends on the music i listen to

i usually listen to hard rock but i tried some techno and i think the sytem really shines in that

unfortunately i dont have a dvd player or a dvd rom drive so i dont think i can listen to dvd audio

i wouldnt return them cause im still happy with them but i think i was expecting too much

the control center looks so sweet

i havent tried them with any sound powerful game (like call of duty) yet so....

so tomorow il try it really loud

these are my old speakers

http://www.altecmm.com/product_details.asp?pID=251

they sounded pretty good

584990028[/snapback]

Well personally i have always like the altec sets :)

far as specs go:

Total Power:

60watts RMS vs 500watts RMS

System Response Frequency:

35hz to 18khz vs 33hz to 20khz

and of course woofer, dual driver, decoding etc

so you know at least that specs wise its a "bigger better system"

but as i mentioned before it does come down to each user personally and there sources... i listen to alot of diff types of music KoRn to eminem to any old popular pop crap that catches my fancy heh, but as long as you rip your mp3s in at least 256 (or just play the CD itself) you should get some nice sound out of it. Just Lose It from Eminem's new cd cranks very well in 320kbit for eg hehe

so yea i guess good luck :)

I just got my Z-5500 and the first thing I checked for was the hiss. I was weary about it before making my purchase, but after reading about some peoples experiences, I decided a hissing audible only 2-3 inches from the speakers is not a bad trade off for what you get. So I plug it in and what do I notice? There is absolutely no hiss. I can't hear any hissing when I put my ear up right against it. As far as testing the speakers I've only put it through my PS2 via Optical cable playing Need for Speed Underground 2 and Metal Gear Solid 3. I must say that was one kind of experience. In the next few days, I am planning to make my own Digital Coax cable so it will fit my Audigy 2 ZS. Overall so far after the first day I am very pleased with them. The soundstage is just incredible! Pictures are available if anyone cares to see my setup lol

Oh I see. What kind of screws are you guys using to put this on your wall? Just wondering, should I ever want to move my speakers to a new location, how do I fill up the hole that I created?

585026873[/snapback]

drywall putty of course :blink:

Hey question for owners or anyone who knows.

When the speakers are mounted on the wall using the stands twisted around like shown above can you swivel or angle the speaker at all or are they limited to pointing in the one direction?

585032005[/snapback]

There fixed, but you do have options if you want to get the angle perfect for a dolby digital setup, for eg:

buy some floor stands and screw the speakers onto them... this way you'll eaisly be able to manage the speakers direction and distance (providing the room allows of course :) )

you can also have it on the wall like my pic shows at the correct angle if you use a board and cut its edges so it fits snugly into the corner with the speaker attached to it. bit hard to picture without screens i know, but this way works nicely and keeps the speakers out of the way and also allows you to choose the angle

there is places that can handle these projects for a price, and there is even special rotating stands you could modify to give a swiviling wall mount

it comes down to what you "really" want and how much you wish to spend to get it heh

Still have no answers about the screws. What kind of screws are you guys using to install the speakers? Thanks.

585032852[/snapback]

we found some screws in the garage... drilled holes in the wall and screwed em in. typical 1 inch threaded screws, nothing special

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Nearly half of American adults now use AI, but concerns are also growing by Hamid Ganji Since the launch of ChatGPT in 2022, the way people research, get their news, and perform routine tasks has changed dramatically. Now, almost everything around us has a touch of AI, and companies are trying to embed it into nearly every product and service they offer. With that in mind, new research shows how Americans are actually adopting this change and using AI in their everyday lives. According to new research conducted by the Pew Research Center, 49% of American adults now use AI chatbots like ChatGPT or Gemini. This marks a significant increase over last year, when only 33% of American adults reported using AI. Additionally, four in ten U.S. adults (42%) said they use AI tools to research information, while 38% said they use these tools to handle tasks at work. Entertainment, image and video editing, and getting medical advice are among the other ways Americans are using AI. Moreover, ChatGPT dominates the U.S. AI market, with 44% of respondents saying they use OpenAI's chatbot. Gemini follows at 24%, while Copilot and Meta AI account for 17% and 14%, respectively. Respondents also said that AI chatbots generally have a positive impact on their productivity and how informed they are. But when it comes to AI’s impact on society, Americans remain largely skeptical. About 40% of American adults believe AI will be more harmful than beneficial to society over the next 20 years. Additionally, 31% expect AI to have a negative effect on them personally. Another 31% of respondents say AI could be equally positive and negative. As for data security, pessimism remains high: 71% of respondents say AI will make their personal information less secure, while only 3% believe it will make their data more secure. American adults also largely lack confidence in both the government and AI companies when it comes to regulating and developing AI. About 67% of Americans have little to no confidence in the U.S. government’s ability to regulate AI effectively. Six in ten adults are also not confident that U.S. companies will develop and use these tools responsibly.
    • MultiOS-USB 0.11.1 by Razvan Serea MultiOS-USB is a versatile, open-source utility designed to create multiboot USB drives capable of hosting multiple operating systems on a single portable device. The project simplifies the process of building a bootable USB by automating the configuration of various boot loaders and file systems, enabling users to install and run diverse operating systems, including Windows, Linux distributions, and diagnostic tools, directly from one drive. It supports ISO booting and persistence, which allows changes made during live sessions to be retained, making it ideal for testing, troubleshooting, or system recovery. Features: BIOS and UEFI support Secure Boot support (boot, manage uefi keys) Load UEFI drivers Launch .efi executables and other boot loaders Boot Linux from .iso images Boot WinPE from bootable .wim images Boot Windows 10/11 installer from ISO (currently, SB must be disabled during installation) Boot Linux installer from network (experimental) Boot locally installed systems: Linux, Windows Automatically update configuration files Without background services exFAT file system support Automatic detection of compatible ISO images (GRUB loopback) Support for systems without loopback support Allows customisation of ISO boot menu (for example: custom kernel options) Support for USB, SSD, nvme, mmcblk, loop, nbd and virtual disks Support for x86, x86_64 A list of tested ISO images can be found here MultiOS-USB 0.11.1 changelog: 68122b7: Fixed-release AUR package #63 fba0283: Update shim to 16.1 8c2ae95: Update grub to v2.14-1 ea15c1d: Update Memtest86+ to v8.10 162f4e6: Add secureblue (#71) b2da8ae: Add AerynOS (#74) ac6640e: Bump config.version 34e9ca6: Add Bluefin (#72) 7a10edd: Add Aurora (#66) cab701b: Update wimboot to v2.9.0-1 90da7f7: Fix Windows error: 0x80070001 - 0x4002F (#52) 2dea73d: Add Microsoft certificates 01f479e: Remove old efi_uga module Download: MultiOS-USB 0.11.1 | 5.3 MB (Open Source) View: MultiOS-USB Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Latest Rufus update improves new Windows 11 install method by Taras Buria Pete Batard, the maker of Rufus, a very popular app for creating bootable Windows (and other OS) media, has released a new beta version of its app. Rufus 4.15 beta is now out, and while it offers no new features, there are all sorts of improvements and fixes, including for the new Windows 11 installation method that was introduced in version 4.14 in early May. The "Silent Windows 11 installation" is a new feature whose goal is to automate operating system installation. All you have to do is boot from the drive, and then Rufus takes over, doing all things for you, such as setting up a new account, skipping ads and prompts, and more. It is a very handy tool, but initially, it had some bugs and issues that required addressing. With version 4.15 beta, Rufus is fixing that, particularly a bug with installation failing at 75%, crashes on Snapdragon X-based PCs, and more. Here is the changelog: Rufus 4.15 beta is now available for download from its GitHub repository. If you have never used Rufus before, you can check out our guide here. It is a very useful utility to have, as it allows you to deal with plenty of Windows 11's annoyances, which are still there, despite Microsoft's ongoing efforts to fix them.
    • Microsoft fixes one of Excel Copilot's most frustrating limitations by Usama Jawad Microsoft began integrating Copilot into Excel a couple of years ago and has been upgrading it with new functionalities since then. While some changes have been controversial, Microsoft is hoping to win over users by allowing them to be more productive via Copilot. To that end, it has now announced a Copilot improvement that may actually be appreciated by people who use it regularly. Excel customers often use the Copilot prompt box to issue instructions to format and customize their data, but it can become quite tiring to keep repeating the same instructions again and again. Microsoft now allows you to define Copilot personalization rules for formatting, naming conventions, formulas, and report styles. These can be accessed via Settings > Personalization, where you can explain your rules in natural language like "Always format currency in USD with no decimals", and just let Copilot take care of the rest. Microsoft is going a step further in this direction by allowing you to set workbook rules too. These rules are stored as a .Rules sheet, and are preserved while the workbook is shared. This fosters collaboration while making sure that standard rules govern the Copilot editing experience across the organization. Other advantages of this capability include pointing it to specific examples, defining dynamic formulas, and referencing an entire sheet and asking Copilot to infer rules based on that. You can leverage this feature by opening Copilot in Excel, clicking on "+", and selecting Create workbook rules. If you have an existing .Rules sheet, you can simply start listing the rules in column A as well. Personalization features are available to all Copilot in Excel users across the web, Mac, and Windows. Meanwhile, workbook rules are currently being previewed for Windows and Mac customers on the Insiders channel. General availability is scheduled after a few weeks, but a concrete date is currently unknown. Overall, the Excel capability is quite similar to ChatGPT's memory features, which allow you to permanently store items in the AI model's context window.
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      68
  • Tell a friend

    Love Neowin? Tell a friend!