Dell UltraSharp 2005FPW 20" Widescreen LCD


Recommended Posts

New 2005FPW Deal (hopefully this hasn't already been posted):

2005 FPW Link

Use 40% off coupon code: 6WZ30DBFL14P2W

$60 off $500 code: FKPVH8KZFHDJT?

Base Price: $699

40% off code: -$279.60

$60 off code: -$60

=$359.40

http://forums.slickdeals.net/showthread.ph...&postid=0#post0

So i just got it in today. Amazing. I'm not seeing any dead pixels, nor backlight bleed. However, it's day time, and i'm not super anal about a dead pixel that i wont notice 95% of the time.

Question: How do i know what revision and the born on date is? I know it's been posted before, but when it's a 130 page thread, it gets to be a long read (yes, i read it all).

Edit: Nevermind, i'm an idiot. I got a A02, July 05.

Edit 2: I shall post up a review in a little bit, after i've experianced the monitor w/ both day and night ambient conditions. However, after playing UT04 w/ widescreen, and all the visual effects on full, i cannot believe the picture quality on this monitor. The shadows, the reflections on the cannons, etc.

Edited by LBraasch
When I play a widescreen DVD on my 2005FPW, it doesn't fill the width of the screen.  Instead, there's bars on both the sides, and the top/bottom of the movie, as opposed to just the thin bars on the top/bottom.  I've tried w/multiple widescreen DVDs and all yield the same result.  How can I get my DVDs to show up like Finding Nemo did in the first post of this thread?

586250953[/snapback]

Another possible solution/issue. You might be trying to watch a non-anamorphic widescreen movie. Early DVD's had bars matted onto the top and bottom to make them format a 4:3 screen. When played on a 16:9, the DVD software inserts bars at the side to make it fit. The solution is to do a ZOOM on the DVD, or purchase a newer Anamorphic print...

Ok, so i'm having a problem. When playing dvd's, i still get the wide black bars, vs. the thin ones shown in the screen shots. However, when in the dvd menu, it gives me the nice thin ones. Why does it go to the thicker ones when the movie plays? I have the monitor set to "aspect".

I just call dell for a refund and they give me a DPS number with shipping back address... here is my question...

I order the monitor on 7/11/2005 so this 7/31 will be the end of my 21 days... i will ship out the monitor tommorrow which is 7/29 leaving me with 2 more days

till my 21 days end.. but usps don't ship on weekends so even if it reach dell, it have been over 21 days already, will they still give me a refund...

and beside, how does Dell RMA number works? their RMA# will only last 5 days but do they count weekends as those 5 days too? and when does it actually start? does the 5 days begin after the day i call for it or start from the date that they create it...

Edited by lanvo

Hi, I've just bought one of these babies from the US, and I'd like to know something about the powersupply.

You see, I live in Australia, a our voltages are different(ours is around 220v), so I'll need to get some sort of replacement cord or an adaptor.

Now what I need to know it what sort of power supply this monitor uses; an external powersupply, or on that's built into the monitor. If it's a built in one, does it have a 110/220v switch.

I'm hoping I won't have to buy a 220>110 transformer, cause those things are meant ot be expensive. :(

Thanks in advance. :D

Hi, i have some question about Dell RMA procedure...

I order a Dell 2005FPW LCD Monitor on 7/11/2005 and so tommorrow my 21 days policy for a refund will end which is on the 7/31/2005... So if I call Dell today to get me an RMA number for a refund. Do you

think that it is still possible for me to do that? I meant, today and tommorrow is weekends so there is no way that i can send the monitor to them becuase all postal service around

my area is close. So the only way i can ship the package to them is on this Monday, but this monday which is 8/01/2005 is my 22 days of ordering the monitor which means it has passed the

time period for a 21 days return policy...

Can anyone make sure for me that they will still give me a refund for this?

Ok, so i've had this monitor for a little over a day now, so here are some of the impressions thus far...

Opening the box:

People complained about the box. The box is brown, it says dell, it is thick cardboard that doesn't break. It's dell, not apple. Money spent on a fancy box is reflected on the customer spending more on products. I paid for a monitor, not a fancy box that holds a montior. When you open the first flaps of the box, there are instructions printed on the box, showing you how to remove the montior from the box. Nice. There is a large colorful "quick setup" guide, and a paper booklet which appears to be about warrentee information and stuch, but really is just disclaimers in about 5 languages. Disregaurd it.

The monitor and stand attach very easily, and as previously noted, the vga cable is already attached to the monitor, and the usb, dvi, and power cable are bagged. It took me maybe 5 minutes to assemble the monitor to my liking. I hooked everythign up, and the screen came to life. I waited about 2 minutes, and my videocard appeared w/ the new resolution, and i was in widescreen bliss.

Performance:

I hooked my keyboard and mouse via the back of the monitor and they seem to be running just fine, no lag nothing. I also tried out w/ usb external drive w/ no failure. I used the side ports to upload images from my digital camera, worked fine, speeds seemed normal.

Running photoshop and music editing programs are bliss. Althoguh i'm coming from 1400x1050 resolution, i have to say that the extra width is quite nice.

I usually don't play games, but i figured i'd download demos of HL2 and UT2004 just for kicks, as they support widescreen. I set all the settings to the highest level, and went from there. W/ zero lag, and zero ghosting, i can honestly say i want to buy HL2. Widescreen picture makes you feel like you're in the game.

I downloaded some HDWMV's to see how it would look. Again, no dissapointments. As we speak, i've just ordered the T2 "extreme dvd" which has a bonus disc w/ the movie encoded in HDWMV.

I was a little dissapointed w/ the dvd playback quality. The colors are right, but it's a little grainy. When talking with someone about it who also has the montior said it has to do with something in the mechanics of the monitor. Something about overdrive. It went completely over my head, but he seemed pretty sure about it, and said that it only occures on this monitor w/ mpeg2 video. I dunno.

For kicks, i hooked up my vcr into the composite input to try out the pip. Pip is nice if you don't have a tv in the room, and would still like to watch the news or something, however i wouldn't really use it for anything else, at least on the 20". I feel like dell added this feature to use as a selling point, neither picture by picture or picture in picture is super useful. I have a tv in same room, so i doubt the composite and s-video inputs will be getting much use.

Quality/Fit/Finish

I got a A02 made in July 05. Zero dead pixels, and a very VERY minimal amount of backlight bleed, which really only can be seen when the screen is compeltely black, and it's pitch black in the room. If you're so much as watching a movie on the screen, you will not notice it. I've had zero problems w/ the monitor thus far, and have to say dell sure did pick up the pieces on this monitor, and appearingly fixed the quality controll issues. I feel like majority of the problems was in the A00 series, and once upgraded, a lot of the problems went away.

My modded Dell 2005FPW:

To prevent further backlight leakage getting worse and to prevent the heat from getting to hot, i added an 80mm computer case fan to the back

of my Dell 2005FPW!!! :D anyways, its really hot to get the strings though the back of this monitor though hehe :Ds...

picture3662oz.jpg

and this method really works!!! no more heat whatsoever when i touch the back of htis monitor!!!

My modded Dell 2005FPW:

To prevent further backlight leakage getting worse and to prevent the heat from getting to hot, i added an 80mm computer case fan to the back

of my Dell 2005FPW!!! :D anyways, its really hot to get the strings though the back of this monitor though hehe :Ds...

picture3662oz.jpg

and this method really works!!! no more heat whatsoever when i touch the back of htis monitor!!!

586299811[/snapback]

why would you do that to such a pretty monitor? :(

lol, good question.. :D

i push my monitor all the way into the wall so no one would see it, plus my computer desk has to wood stands on the left and right side so it hides the fan very nicely :D

anyways, can someone help me with my question below:

i have some question about Dell RMA procedure...

I order a Dell 2005FPW LCD Monitor on 7/11/2005 and so tommorrow my 21 days policy for a refund will end which is on the 7/31/2005... So if I call Dell today to get me an RMA number for a refund. Do you

think that it is still possible for me to do that? I meant, today and tommorrow is weekends so there is no way that i can send the monitor to them becuase all postal service around

my area is close. So the only way i can ship the package to them is on this Monday, but this monday which is 8/01/2005 is my 22 days of ordering the monitor which means it has passed the

time period for a 21 days return policy...

Can anyone make sure for me that they will still give me a refund for this?

Edited by lanvo

Does anyone think I would be cheeky asking for some compensation from Dell?

I ordered this little under a month ago and have had 2 monitors so far, both with internal exposure issues and the second with a slightly scratched screen.

They have yet to send me my promised 3rd replacement, which was supposed to be here last Monday (Instead, 2 power cables turned up...). I was expecting something yesterday after they said my replacement was on 'high priority', but nothing!

I still have the second faulty unit here, they said I could keep it until I was happy with the replacement. The irony is I can't really (and don't want to) use it due to the scratch damage!

Argh!!! :angry:

So can anyone help me with my voltage question? :(

Hi, I've just bought one of these babies from the US, and I'd like to know something about the powersupply.

You see, I live in Australia, a our voltages are different(ours is around 220v), so I'll need to get some sort of replacement cord or an adaptor.

Now what I need to know it what sort of power supply this monitor uses; an external powersupply, or on that's built into the monitor. If it's a built in one, does it have a 110/220v switch.

I'm hoping I won't have to buy a 220>110 transformer, cause those things are meant ot be expensive. :(

Thanks in advance. :D

586291455[/snapback]

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It's amazing that anyone still uses this bloated trash.
    • @Sayan...I have defended you at various points as I hope you know. This headline however is utter trash...shame on you sir!
    • An actual cosmic "Eye of Sauron" had been looking straight at us all along by Sayan Sen Image by Kovin P. Vasquez via Pexels | Not representative An international team of researchers has solved a long-standing mystery surrounding a distant blazar known as PKS 1424+240, helping explain why it produces some of the brightest high-energy gamma rays and cosmic neutrinos ever observed despite appearing to have a relatively slow-moving jet. The findings were published on June 6 in Astronomy & Astrophysics Letters. The study addresses a broader challenge in astrophysics: understanding how extreme cosmic objects accelerate particles to very high energies and produce very high-energy (VHE) photons and neutrinos. PKS 1424+240 is located billions of light-years from Earth. It has attracted attention for years because it is both a powerful source of VHE gamma rays and the brightest known neutrino-emitting blazar in the sky, according to observations by the IceCube Neutrino Observatory. It is also associated with one of the strongest peaks in IceCube's nine-year neutrino sky map A blazar is a type of active galactic nucleus powered by a supermassive black hole that pulls in surrounding matter and launches jets of plasma moving close to the speed of light. What makes blazars unique is their orientation. One of their jets points almost directly toward Earth, making them appear exceptionally bright across the electromagnetic spectrum and allowing scientists to study some of the most extreme physical processes in the Universe. The scientists exclaimed it's like the 'Eye of Sauron' in deep space. Usually, the brightest gamma-ray-emitting blazars are expected to have jets that appear to move very quickly. However, radio observations of PKS 1424+240 suggested that its jet was moving much more slowly, creating a contradiction that became part of a long-running problem known as the "Doppler factor crisis." To investigate, researchers analyzed 15 years of observations from the Very Long Baseline Array (VLBA), a network of 10 radio antennas spread across the continental United States, Hawaii and St. Croix. Using a technique called Very Long Baseline Interferometry (VLBI), astronomers combine signals from widely separated radio telescopes to create a virtual Earth-sized telescope capable of revealing extremely fine details. The team combined 42 polarization-sensitive radio images collected between 2009 and 2025, creating a much deeper and more detailed view of the jet than had previously been possible. The observations were carried out as part of MOJAVE (Monitoring Of Jets in Active galactic nuclei with VLBA Experiments), a long-running program that studies the brightness, polarization and magnetic field structures of jets produced by active galaxies. The project aims to better understand how activity near supermassive black holes is linked to high-energy radiation and neutrino emission. “When we reconstructed the image, it looked absolutely stunning,” said Yuri Kovalev, lead author of the study and Principal Investigator of the European Research Council-funded MuSES project at the Max Planck Institute for Radio Astronomy. “We have never seen anything quite like it — a near-perfect toroidal magnetic field with a jet, pointing straight at us.” The image revealed an unusual geometry. The researchers found that Earth lies almost directly in line with the jet, with a viewing angle of less than 0.6 degrees. In simple terms, astronomers are looking almost straight down the jet. This turned out to be the key to the mystery. Because the jet is aimed almost directly at Earth, a relativistic effect called Doppler boosting dramatically increases its apparent brightness. The study found that this effect boosts the emission by a factor of about 30 while also making the jet appear slower than it actually is. “This alignment causes a boost in brightness by a factor of 30 or more,” said Jack Livingston, a co-author at the Max Planck Institute for Radio Astronomy. “At the same time, the jet appears to move slowly due to projection effects — a classic optical illusion.” The nearly head-on view also gave scientists a rare look at the jet's magnetic field. Using polarized radio signals, they detected a clear toroidal, or doughnut-shaped, magnetic field component. The observations suggest the jet carries an electric current and that its magnetic field helps launch, shape and stabilize the flow of plasma. Researchers believe this magnetic structure may also play a key role in accelerating particles to energies high enough to produce both gamma rays and neutrinos. “Solving this puzzle confirms that active galactic nuclei with supermassive black holes are not only powerful accelerators of electrons, but also of protons — the origin of the observed high-energy neutrinos,” Kovalev said. The research was conducted under the MuSES (Multi-messenger Studies of Energetic Sources) project, which investigates how active galactic nuclei accelerate particles and generate different cosmic signals, including light and neutrinos. Scientists say understanding how protons are accelerated and linked to neutrino production remains one of the major unanswered questions in astrophysics. The findings help explain why some blazars can appear to have slow jets while still producing extremely bright high-energy emissions. More broadly, the study strengthens the link between relativistic jets, magnetic fields, gamma rays and high-energy neutrinos. Researchers say the results provide new clues about how some of the Universe's most powerful natural particle accelerators work and offer important insights for multimessenger astronomy, which combines different types of cosmic signals to study extreme events in space. Source: European Research Council, EDP Sciences This article was generated with some help from AI and reviewed by an editor. Under Section 107 of the Copyright Act 1976, this material is used for the purpose of news reporting. Fair use is a use permitted by copyright statute that might otherwise be infringing.
    • Gotenks98 is right... Outlook (new) is absolute trash. Doesn't Mozilla have an Enterprise Version of Firebird?
  • Recent Achievements

    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
    • Week One Done
      lamborghiniv10 earned a badge
      Week One Done
    • Reacting Well
      X-No-file earned a badge
      Reacting Well
    • One Month Later
      pestcontrol46 earned a badge
      One Month Later
    • Week One Done
      pestcontrol46 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      PsYcHoKiLLa
      273
    3. 3
      Skyfrog
      75
    4. 4
      +Edouard
      72
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!