Recommended Posts

Can't say that I have but it looks sweet, very clean!

The rest of the addons also sound like something I'd use in the old days, I do remember a few of them. Also, thank you for the Carbonite reminder - Beside the lower resource use, how does it differ from QH, harder to use? Thanks for the excellent suggestions (Y)

Re: Carbonite:

Yes and no, it does take some getting used to, but it does work in a very similar way, giving way points to the nearest quest objective and whatnot, as well as a arrow you can setup and move to show you where to go (much like questhelper). I suggest trying it, if you don't like it, you can always uninstall it and reinstall questhelper.

Also FYI, right clicking WoW.exe and running it in Vista compatibility mode with sp2 seems to greatly increase performance under Win 7x64... At least for me. Of course you will get crappy fps (i get around 20) in dalaran, but other places, its always a constant 60fps.

Carbonite - dont use questhelper, its a memory and resource hog, use this instead.

Omen - Threat meter for raids/instances

Qbar - adds a dynamic button bar with quest items only, so u dont need to go searching your bags for items.

Recount - DPS meter

SexyMap - replace the minimap that Caith uses, its crap compared to this one

Xloot - better loot frames.

- Carbonite is just a big of a resource hog. If you're looking for a quest guide download tekkubs' tourguide. It's small and all it gives you is a way point system to the next quest you need to do, it's objective and where to hand in.

- Drop Omen & Recount then grab Skada it'll use 1/5 of the memory and do a better job than omen in tracking your threat too!

- You can drop Qbar and use Cargbags it has a filter for quest items, failing that use just the in game quest tracker it has a button next to the quests which require you to use items.

- SexyMap? Slap yourself for using the default skin! Grab pminimap instead. It'll go better with caith and it doesn't look so ****ing grody.

- Xloot is a resource hog. Use sGroupLoot and Butsu.

If you're looking for minimalistic, practical and clean try:

ALZAUI

TukUi

LUI for something caith-esq

Edit: I'll put my money where my mouth is -

No Targets, Targets, Combat with Cooldowns and my XP bar which flashes after an XP gain.

Edited by Spookie

I've recently switched to Carbonite myself from Quest Helper. For two reasons:

1. It includes an alert whenever it detects the opposite faction within your vicinity.

2. Includes Node data for all Ore and can make a route on your Map for you to follow (Really excellent!)

I personally think that the Interface on Carbonite is poor. That is to say it is very difficult to understand and it uses highly nested menus for the things you want access to and makes things you are unlikely to want to use right up in your face. A poor UI but it is quite advanced with its feature set. I think Quest Helper and Carbonite are pretty much on-par when it comes to the actual process of helping you complete quests although Quest Helper does look nicer.

I'm curious, I haven't played since Wrath came out basically.

Did they ever change it so you can make more than one Death Knight per server, or change it so you can make a Death Knight if you didn't have a level 55 toon or higher?

Just asking because on my friends server I have quite a few toons, but all are under level 25 or so. I rather enjoyed my DK when I played him :D

You can still only have 1 DK per server, but they did change it so you only need one level 55 on the account and then you can make a DK on another server (before, the DK had to be on the same server as the 55). So have a level 55 on server A and you can now make DKs on server B, C, D etc...

Oh for the love of god. I tested out the game after my Vista re-install on my druid and everything was back to normal. I load up my Death-Knight alt which is standing around Dalaran. FPS is averaging 15 or so ... I'm thinking that's Dalaran's fault. I Death Gate back and still 15 ... I fly back to SW and it MAXES out at 20fps :blink:

So I'm able to hit 400+ on my druid in Outlands yet I can't even get past 20 on my DK.

Standing up against a wall in SW, UI hidden and I can't even hit 16FPS ...

Unavngivet.png

What is wrong?!

I don't often post here, despite being an avid WoW player (since EU release), but I thought you may be interested in this write-up I did of the Cataclysm starting zones. I was fortunate enough to go as a representative of WoWWiki, and have to say: it all looks awesome.

http://www.wowwiki.com/WoWWiki:Kirkburn%27...Con_2009_Report

Something is definately wrong there Sethos. You SHOULD be getting 60+ fps from that pose against the wall. Can you make a list of addons installed? Also, dont forget your drivers for Catalyst.

Well it wasn't an addon issue or anything like that. I did some troubleshooting and checked the official forums, it's apparently an issue with ATi cards and shadows. Pre-3.x ( Can't remember the exact number ) most ATi users would experience shadow flickering. That was "resolved" by turning off Shadowinstancing through the console. Now Blizzard decided to include this 'fix' in a patch, so when it detects an ATi card it's applied.

Problem is, with this fix disabled, having shadows enabled or having them at high settings with kill your FPS. I can't even turn it shadowinstancing on any more? So now I have to run around with shadows disabled until Blizzard or ATi comes up with a solution.

On a different note, was walking around Stormwind and noticed a lot of dead level 1's, I was like "Huh", then I noticed they actually spelled out a website - Looks like a gold site, they are really getting creative now :laugh:

GoldSellers.png

They do that all day long on my server (Stormscale-EU) both in Orgrimmar in-front of the Auction House and in Stormwind where Sethos showed his Screenshot.

It's really neat to be able to create both Horde and Alliance characters on PVP Realms :) I've finally got that Gnome Rogue I always wanted :wub:

Hopefully this isn't a complete newbie question!

I started another Death Knight on a different server as Horde instead, I just have one problem. Whenever I press any 'build links' to for an example Wowhead, the numbers are all messed up. Like James' DK Leveling Guide those build-links he has, like "Talent Spec at level 80: 16/0/55" just transfers me to a page with a (16/0/33) build. Actually seems like there's a 33 limit everywhere now, how come, what did I miss?

Hopefully this isn't a complete newbie question!

I started another Death Knight on a different server as Horde instead, I just have one problem. Whenever I press any 'build links' to for an example Wowhead, the numbers are all messed up. Like James' DK Leveling Guide those build-links he has, like "Talent Spec at level 80: 16/0/55" just transfers me to a page with a (16/0/33) build. Actually seems like there's a 33 limit everywhere now, how come, what did I miss?

In his guide he says "Talent Build - Updated for 3.0.8". I believe the DK trees got changed in 3.1 or 3.2 (or both). So previous links to talent builds would no longer work. Do a google search for "3.2 death knight build" it'll give links to updated trees.

I'm leveling a DK as well.. I'm no expert or a theorycrafter so I can't say that you must heed my advice or suck, but.. try it ^^

http://www.wowhead.com/?talent#jZGZfM0IxfdM0ux0hco

As Blood you actually have no down time at all, unless you try to AoE your way through.. it just doesn't work as well as Unholy/Frost - so that might be a good idea as a leveling build.

But if you do go Unholy make sure that you have set your talents to get a pernament Ghoul pet, it's very helpful.

Oh yeah.. don't forget that you are leveling a new character, not raiding or doing Arena.. so part of your learning is to try out your talents, don't look for pre-made talent builds just yet, try to experiment.

Just don't take PVP talents if you're not planning on PVP'ing..

This is kinda hard ... stuck at level 17 atm ... trying to do the Spinal Dust quest ... PITA!

Ignore that one, it's just a repeatable without any follow-ups. All other quests in Ghostlands are a lot easier and you can just do them all and still get exalted with Tranquillien (which I recommend).

Ignore that one, it's just a repeatable without any follow-ups. All other quests in Ghostlands are a lot easier and you can just do them all and still get exalted with Tranquillien (which I recommend).

Yup you can, it's designed in such a way that you will get your final piece of gear from the rep vendor just as your leaving the area.

I love the Blood elf zone, it's by far the best in the game and runs rings around the Dranei zone they added in the same expansion. My favourite quest is the one that sends you to Undercity and ends with Sylvanas breaking into song :blush:

Do you guys have any tips for getting Wealth from my Horde Characters to my new Alliance Characters on the same Realm?

I have a few friends with Alliance characters but none of them have their characters on the same Realm as me so I can't do any sort of transfers with them. I've begun collecting some wealth with the Rogue I created by making him Mining/Skinning and sending the Ore and Hides to a dedicated Bank character at the Auction House but it would be nice if I could transfer a few thousand gold.

I've read that some people use the Neutral AH to transfer items with a low sell price but that seems kinda risky if someone else intercepts the item before you can.

Put up a rubbish item on the Neutral AH with the character you want to receive the gold for a high amount (or whatever you want to transfer) and have the character you want to transfer money from buy it.

However, remember that the Neutral AH takes a 15% cut.

As for items you want to transfer, you'll have to risk putting up at a low price or have that item be the one you use to send gold over with.

If you go the low price item route, do it at stupid o'clock in the morning to minimise the risk.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • OpenAI's new GPT-5.5-Cyber tops Claude Mythos 5 in vulnerability benchmark by Pradeep Viswanathan OpenAI today announced a major expansion of Daybreak, a cybersecurity initiative designed to help defenders find, validate, and fix software vulnerabilities earlier in the development process. The availability of powerful AI models has definitely changed the cybersecurity landscape by making vulnerability discovery much faster. However, the bigger bottleneck for the industry is now patching those vulnerabilities. Impacted software teams need to validate the discovered issues, understand their impact, develop fixes, test them, and deploy patches. Back in March, OpenAI launched a preview of Codex Security, which uses agentic reasoning with automated validation to discover high-impact issues and actionable fixes specific to the codebase. Since then, it has scanned more than 30 million commits across over 30,000 codebases; more than 70,000 findings were marked as fixed by human reviewers, while over 500,000 findings were automatically determined to be fixed. Now, OpenAI is releasing an updated Codex Security plugin that can run deep scans, review recent code changes, generate security reports, trace attack paths, validate findings, and create codebase-specific patches for human review. It can also triage findings from existing scanners, advisories, bug bounty reports, and ticketing systems. OpenAI says the plugin can export results to vulnerability management systems and integrate with workflows using SARIF files, CodeQL queries, the Codex CLI, and the Codex app. Back in May, OpenAI announced the preview of GPT-5.5-Cyber, a new model built on top of the recently released GPT-5.5, designed for specialized cybersecurity work. Today, OpenAI launched the full version of GPT-5.5-Cyber through a limited release for verified defenders. On CyberGym, GPT-5.5-Cyber scored 85.6%, compared with 81.8% for GPT-5.5 and 83.8% for Claude Mythos 5. It also scored 39.5% on ExploitGym, compared with 25.95% for GPT-5.5, and 69.8% on SEC-bench Pro, compared with 63.1%. OpenAI also announced the new Daybreak Cyber Partner Program, which will allow security vendors and service providers to use GPT-5.5 with Trusted Access for Cyber in their products and services. Accenture, Akamai, Cisco, Cloudflare, CrowdStrike, IBM, Palo Alto Networks, Proofpoint, SentinelOne, Wiz, Zscaler, and others were listed as initial partners for this program. OpenAI is also launching Patch the Planet with Trail of Bits, HackerOne, Calif, researchers, and maintainers. More than 30 open-source projects have committed to participate, including cURL, Go, Python, Sigstore, and pyca/cryptography.
    • AMD confirms 26.6.2 FSR driver breaks on many Windows PCs by Sayan Sen Earlier today AMD released a major graphics driver update as it brings support for FSR 4.1 to Radeon RX 7000 series GPUs. The new update, version 26.6.2, also brings support for Assassin's Creed Black Flag Resynced and more. And while the driver technically supports Windows 10 version 21H2 and newer, the tech giant has confirmed that there is a major issue with the new driver on non-Windows 11 PCs as it fails to launch properly on such systems. The error message says, "The version of AMD Software that you have launched is not compatible with your currently installed AMD graphics driver." Therefore on the surface it looks like a compatibility problem. AMD has also confirmed that the device manager will display the yellow bang or yellow exclamation sign alongside your GPU under the Display adapters dropdown. Here is what the Radeon team's official advisory recommends to affected users: "Users Running Windows 10 and AMD Software: Adrenalin Edition 26.6.2 May Encounter Yellow Bang in Device Manager Affecting AMD Radeon RX Series Graphics ... Our Engineers are currently investigating this issue and will provide a fix once it is available. Affected users may revert to AMD Software: Adrenalin Edition 26.6.1 as a temporary workaround." As such you should revert back to the previous 26.6.1 driver which was released earlier this month. In case you were looking to play Assassin's Creed Black Flag Resynced and DOOM: The Dark Ages | Revelations you will probably have to wait a while if you want the driver to support those games officially. You can find the support article here on Microsoft's website.
    • https://uupdump.net/selectlang...7829-4524-978d-7b5fe79263e3
    • A McDonald's restaurant uses about 1.5 to 2 million gallons of water per year for operations like food preparation, cleaning, and restrooms. That is a lot less than the 2,083 gallons of water per megawatt hour mentioned above.
    • Turbo Pascal Original authorAnders Hejlsberg (at Borland) DeveloperBorland Release20 November 1983; 42 years ago[1][2] Operating systemCP/M, CP/M-86, MS-DOS, Windows 3.x, Classic Mac OS PlatformZ80, x86, 68000, PC-98 https://en.wikipedia.org/wiki/Turbo_Pascal It was the one language I actually learned to program in.   I wasn't very good at it and never used it at work.    If anyone has any personal Turbo Pascal stories or personal accomplishments using it, please take a moment to share.   Thanks. Peace
  • Recent Achievements

    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
    • Week One Done
      mnsgroup earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      505
    2. 2
      +Edouard
      208
    3. 3
      PsYcHoKiLLa
      100
    4. 4
      Michael Scrip
      88
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!