Recommended Posts

Can't say that I have but it looks sweet, very clean!

The rest of the addons also sound like something I'd use in the old days, I do remember a few of them. Also, thank you for the Carbonite reminder - Beside the lower resource use, how does it differ from QH, harder to use? Thanks for the excellent suggestions (Y)

Re: Carbonite:

Yes and no, it does take some getting used to, but it does work in a very similar way, giving way points to the nearest quest objective and whatnot, as well as a arrow you can setup and move to show you where to go (much like questhelper). I suggest trying it, if you don't like it, you can always uninstall it and reinstall questhelper.

Also FYI, right clicking WoW.exe and running it in Vista compatibility mode with sp2 seems to greatly increase performance under Win 7x64... At least for me. Of course you will get crappy fps (i get around 20) in dalaran, but other places, its always a constant 60fps.

Carbonite - dont use questhelper, its a memory and resource hog, use this instead.

Omen - Threat meter for raids/instances

Qbar - adds a dynamic button bar with quest items only, so u dont need to go searching your bags for items.

Recount - DPS meter

SexyMap - replace the minimap that Caith uses, its crap compared to this one

Xloot - better loot frames.

- Carbonite is just a big of a resource hog. If you're looking for a quest guide download tekkubs' tourguide. It's small and all it gives you is a way point system to the next quest you need to do, it's objective and where to hand in.

- Drop Omen & Recount then grab Skada it'll use 1/5 of the memory and do a better job than omen in tracking your threat too!

- You can drop Qbar and use Cargbags it has a filter for quest items, failing that use just the in game quest tracker it has a button next to the quests which require you to use items.

- SexyMap? Slap yourself for using the default skin! Grab pminimap instead. It'll go better with caith and it doesn't look so ****ing grody.

- Xloot is a resource hog. Use sGroupLoot and Butsu.

If you're looking for minimalistic, practical and clean try:

ALZAUI

TukUi

LUI for something caith-esq

Edit: I'll put my money where my mouth is -

No Targets, Targets, Combat with Cooldowns and my XP bar which flashes after an XP gain.

Edited by Spookie

I've recently switched to Carbonite myself from Quest Helper. For two reasons:

1. It includes an alert whenever it detects the opposite faction within your vicinity.

2. Includes Node data for all Ore and can make a route on your Map for you to follow (Really excellent!)

I personally think that the Interface on Carbonite is poor. That is to say it is very difficult to understand and it uses highly nested menus for the things you want access to and makes things you are unlikely to want to use right up in your face. A poor UI but it is quite advanced with its feature set. I think Quest Helper and Carbonite are pretty much on-par when it comes to the actual process of helping you complete quests although Quest Helper does look nicer.

I'm curious, I haven't played since Wrath came out basically.

Did they ever change it so you can make more than one Death Knight per server, or change it so you can make a Death Knight if you didn't have a level 55 toon or higher?

Just asking because on my friends server I have quite a few toons, but all are under level 25 or so. I rather enjoyed my DK when I played him :D

You can still only have 1 DK per server, but they did change it so you only need one level 55 on the account and then you can make a DK on another server (before, the DK had to be on the same server as the 55). So have a level 55 on server A and you can now make DKs on server B, C, D etc...

Oh for the love of god. I tested out the game after my Vista re-install on my druid and everything was back to normal. I load up my Death-Knight alt which is standing around Dalaran. FPS is averaging 15 or so ... I'm thinking that's Dalaran's fault. I Death Gate back and still 15 ... I fly back to SW and it MAXES out at 20fps :blink:

So I'm able to hit 400+ on my druid in Outlands yet I can't even get past 20 on my DK.

Standing up against a wall in SW, UI hidden and I can't even hit 16FPS ...

Unavngivet.png

What is wrong?!

I don't often post here, despite being an avid WoW player (since EU release), but I thought you may be interested in this write-up I did of the Cataclysm starting zones. I was fortunate enough to go as a representative of WoWWiki, and have to say: it all looks awesome.

http://www.wowwiki.com/WoWWiki:Kirkburn%27...Con_2009_Report

Something is definately wrong there Sethos. You SHOULD be getting 60+ fps from that pose against the wall. Can you make a list of addons installed? Also, dont forget your drivers for Catalyst.

Well it wasn't an addon issue or anything like that. I did some troubleshooting and checked the official forums, it's apparently an issue with ATi cards and shadows. Pre-3.x ( Can't remember the exact number ) most ATi users would experience shadow flickering. That was "resolved" by turning off Shadowinstancing through the console. Now Blizzard decided to include this 'fix' in a patch, so when it detects an ATi card it's applied.

Problem is, with this fix disabled, having shadows enabled or having them at high settings with kill your FPS. I can't even turn it shadowinstancing on any more? So now I have to run around with shadows disabled until Blizzard or ATi comes up with a solution.

On a different note, was walking around Stormwind and noticed a lot of dead level 1's, I was like "Huh", then I noticed they actually spelled out a website - Looks like a gold site, they are really getting creative now :laugh:

GoldSellers.png

They do that all day long on my server (Stormscale-EU) both in Orgrimmar in-front of the Auction House and in Stormwind where Sethos showed his Screenshot.

It's really neat to be able to create both Horde and Alliance characters on PVP Realms :) I've finally got that Gnome Rogue I always wanted :wub:

Hopefully this isn't a complete newbie question!

I started another Death Knight on a different server as Horde instead, I just have one problem. Whenever I press any 'build links' to for an example Wowhead, the numbers are all messed up. Like James' DK Leveling Guide those build-links he has, like "Talent Spec at level 80: 16/0/55" just transfers me to a page with a (16/0/33) build. Actually seems like there's a 33 limit everywhere now, how come, what did I miss?

Hopefully this isn't a complete newbie question!

I started another Death Knight on a different server as Horde instead, I just have one problem. Whenever I press any 'build links' to for an example Wowhead, the numbers are all messed up. Like James' DK Leveling Guide those build-links he has, like "Talent Spec at level 80: 16/0/55" just transfers me to a page with a (16/0/33) build. Actually seems like there's a 33 limit everywhere now, how come, what did I miss?

In his guide he says "Talent Build - Updated for 3.0.8". I believe the DK trees got changed in 3.1 or 3.2 (or both). So previous links to talent builds would no longer work. Do a google search for "3.2 death knight build" it'll give links to updated trees.

I'm leveling a DK as well.. I'm no expert or a theorycrafter so I can't say that you must heed my advice or suck, but.. try it ^^

http://www.wowhead.com/?talent#jZGZfM0IxfdM0ux0hco

As Blood you actually have no down time at all, unless you try to AoE your way through.. it just doesn't work as well as Unholy/Frost - so that might be a good idea as a leveling build.

But if you do go Unholy make sure that you have set your talents to get a pernament Ghoul pet, it's very helpful.

Oh yeah.. don't forget that you are leveling a new character, not raiding or doing Arena.. so part of your learning is to try out your talents, don't look for pre-made talent builds just yet, try to experiment.

Just don't take PVP talents if you're not planning on PVP'ing..

This is kinda hard ... stuck at level 17 atm ... trying to do the Spinal Dust quest ... PITA!

Ignore that one, it's just a repeatable without any follow-ups. All other quests in Ghostlands are a lot easier and you can just do them all and still get exalted with Tranquillien (which I recommend).

Ignore that one, it's just a repeatable without any follow-ups. All other quests in Ghostlands are a lot easier and you can just do them all and still get exalted with Tranquillien (which I recommend).

Yup you can, it's designed in such a way that you will get your final piece of gear from the rep vendor just as your leaving the area.

I love the Blood elf zone, it's by far the best in the game and runs rings around the Dranei zone they added in the same expansion. My favourite quest is the one that sends you to Undercity and ends with Sylvanas breaking into song :blush:

Do you guys have any tips for getting Wealth from my Horde Characters to my new Alliance Characters on the same Realm?

I have a few friends with Alliance characters but none of them have their characters on the same Realm as me so I can't do any sort of transfers with them. I've begun collecting some wealth with the Rogue I created by making him Mining/Skinning and sending the Ore and Hides to a dedicated Bank character at the Auction House but it would be nice if I could transfer a few thousand gold.

I've read that some people use the Neutral AH to transfer items with a low sell price but that seems kinda risky if someone else intercepts the item before you can.

Put up a rubbish item on the Neutral AH with the character you want to receive the gold for a high amount (or whatever you want to transfer) and have the character you want to transfer money from buy it.

However, remember that the Neutral AH takes a 15% cut.

As for items you want to transfer, you'll have to risk putting up at a low price or have that item be the one you use to send gold over with.

If you go the low price item route, do it at stupid o'clock in the morning to minimise the risk.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • RustDesk 1.4.8 by Razvan Serea RustDesk is a fast, secure, and open-source remote desktop software designed for self-hosting, remote access, and IT support. It provides a privacy-focused alternative to TeamViewer and AnyDesk, offering full control over your data with minimal configuration. The client is fully open source, while users have the option to choose between two server solutions: the Professional Server, a premium offering with advanced features available for purchase, and the Basic Server, a free and open-source alternative for those who prefer a self-hosted setup. RustDesk features Open-source & free remote desktop solution Cross-platform compatibility – Works on Windows, macOS, Linux, iOS, Android, and Web End-to-end encryption (E2EE) based on NaCl for secure connections Peer-to-peer (P2P) connectivity for fast and private remote access Self-hosting support – Own your data with easy deployment on your infrastructure Supports VP8, VP9, AV1 (software) and H264, H265 (hardware) codecs for efficient streaming Unattended access for remote management File transfer & clipboard sharing Multi-monitor support & remote printing Low-latency & high-performance remote access Session recording & chat functionality Professional & Basic server options for flexible deployment Lightweight & minimal resource usage No third-party server dependency for privacy No installation or admin privileges needed on Windows (elevate privileges locally or remotely on demand) Easy installation & minimal configuration required Custom branding & enterprise-level features available RustDesk 1.4.8 changelog: Added Add Windows arm64 support #15139 Feature: Add monitor-switch buttons to remote toolbars #15342 Refact/privacy mode 1 multi monitors #15321 autocomplete online #15313 feat: theme logo #15268 Changes refact: restart remote device, autoconnect #15290 refact(oidc): icon azure to microsoft #15278 Refact/printer driver default unchecked #15191 Revert "fix(iPad): keep touch gestures with external mouse" #15288 Fixes fix Wayland→Wayland clipboard paste fix(arm64-linux): fix CJK font rendering on flutter-elinux #15324 iOS: autocorrect/data detectors corrupt the server Key field (ID/Relay Server settings), making valid keys impossible (or very hard) to enter #15293 fix(ios): mouse mismatch #15339 fix(linux): reap leftover logind session procs on headless teardown #15337 Crash on startup (0xc0000409) / Fast Fail in librustdesk.dll on Windows 11 26H1 #15218 fix(clipboard): Windows DIB images, fill missing alpha #15296 Fix/generate py target injection #15248 Fix clipboard synchronization not fully disabled in View Only mode #15224 fix(keyboard): win, key, Pause #15351 Download: RustDesk 64-bit | MSI | 32-bit ~20.0 MB (Open Source) Links: RustDesk Home Page | Other platforms | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • This makes me think of Dune for some reason.
    • I'm too old to return to the "good old days" when I was installing custom ROMs and tinkering with my devices - now I just want to turn it on and use it. I've read that banking and payment apps work on Murena /e/OS (I'll have to check the ones I use) and I also really want to support Fairphone 😉
    • Time to start going to the local church and play Bingo for a while.
  • Recent Achievements

    • mike_rumble earned a badge
      First Post
    • tuben earned a badge
      Dedicated
    • mnsgroup earned a badge
      Week One Done
    • sumytbe earned a badge
      Conversation Starter
    • B4dM1k3 earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      502
    2. 2
      +Edouard
      203
    3. 3
      PsYcHoKiLLa
      98
    4. 4
      Michael Scrip
      80
    5. 5
      neufuse
      67
  • Tell a friend

    Love Neowin? Tell a friend!