Recommended Posts

Adblock works wonders for me. It blocks ads from annoying sites, allows me to see ads in Neowin, and did I mention it allows ads in Neowin to be shown? ;)

In all seriousness, the ads Neowin implents are the best I have seen. They never get in the way and its hard to even tell they are there. Plus, being a subscriber I am and allowing ads to be shown allows Neobond to pay off 2 hours of bandwidth ;)

Indeed! AdBlock has a wonderful feature called whitelisting. (Y)

In all seriousness, the ads Neowin implents are the best I have seen. They never get in the way and its hard to even tell they are there. Plus, being a subscriber I am and allowing ads to be shown allows Neobond to pay off 2 hours of bandwidth ;)

Yep (Y) They are so well placed you don't even notice them after a while.

  • 3 weeks later...
  • 1 month later...

I have never used adblock because I'm so used to ads that I simply DON'T care about them at all. As if they weren't there. Not talking about Neowin, but every other website on the internet (even the newspaper I read, which usually welcomes me with a huge massive flash ad that covers the whole page up). I have to admit that I have accidentally clicked on those ads that appear on those common words. But it takes less than a second for me to hit the "back" button.

I don't block ads simply because after so many years, it's like they're not there, no matter how annoying they are. But frankly, I find it TOTALLY legit to block ads in webpages. Fine, it's fair for you not to encourage people to use any adblocking app to block ads on neowin, but raising people's warning levels seems a bit TOO far.

I think some people from time to time encourage people to click on the ads to support webpages. When somebody complains they say "hey! come on, click on the ads, to support mantaining the servers". From the advertiser point of view, I don't think it's right to pay when people click on the ads, when visitors close the page as soon as they can. That's not the case of neowin, I don't see any "click on the ads".

That's just my opinion. One suggestion, add the "no adblock" thing to the rules. Or add a rule "visit the site & forum issues" from time to time, to check for changes.

@Julius Caro, Read the rule close. It's not about you can't block ads, it's about you can't brag about and/or tell others how to block ads here on Neowin. AFAIK, no one has been warned for blocking them.. only for bragging about it or telling others how to do it.. for this site specifically.

From now on, people who tell others how to block ads here will be warned and moved into a flood control group with a minute wait. This includes members who gloat about blocking ads.

Profile and Sig options will also be removed (seeing as we have to pay for all that extra bandwidth on sigs).

Dont disrespect me guys because I'm fed up with it. Mods will be told about this new policy forthwith.

It doesn't take a rocket scientist to work out that this revenue keeps us online.

  • 1 month later...

hehe - the irony - on top of this thread is a goodle ad for "adblock" :rofl:

back on topic... I would personally pay for an ad free version of neowin, IF the subscriptions thing was sorted out - i opted in for a mail subscription a while ago, but due to a dodgy shipping co. the payment was returned months later - but theres no way for me to change this OR start a fresh subscription and pay with paypal. I Have PM'd mods about it (and i PM'd Redmak with it!), but whenever i PM a mod (apart from Frank and Giga, theyre great :)), i never get a reply... Maybe the mods are too busy for us :)

As said, i dont block ads, and i do click them because they are a source of income for Neowin, but if there was the option to easily subscribe to an ad free version (or an ad free + mail version), then i'd happily fork out for it :)

Im gunna try to PM another mod to get my current subscription removed, maybe i'll pester Frank :D

Oh, and Neobond, maybe you should implement this into the rules, and/or send everyone a PM with it in, because not everyone reads this forum, and that way you can just say, "Look its there...", then people cant argue (not that they can argue with the owner anyway :D)

edit: its late-ish and my typing sucks

bMaher

Edited by bmaher
Quote - (Neobond @ Oct 25 2005, 02:29)

From now on, people who tell others how to block ads here will be warned and moved into a flood control group with a minute wait. This includes members who gloat about blocking ads.

Profile and Sig options will also be removed (seeing as we have to pay for all that extra bandwidth on sigs).

Dont disrespect me guys because I'm fed up with it. Mods will be told about this new policy forthwith.

It doesn't take a rocket scientist to work out that this revenue keeps us online.

If the boss man says it, id listen....

The logic behind it is clear, if Neowin have a large community they are attractive to advertisers..but if neowin promote adblocking , then it becomes less attractive..no money to run the site and eventually.....

********* T U M B L E W E E D **************

.

Profile and Sig options will also be removed (seeing as we have to pay for all that extra bandwidth on sigs).

You do :huh: i could have sworn most sigs are remotely linked does neowin actally offer to host sigs then :unsure: or do you just mean the extra bandwith to load the link to the sig?

I'm confused

You do :huh: i could have sworn most sigs are remotely linked does neowin actally offer to host sigs then :unsure: or do you just mean the extra bandwith to load the link to the sig?

I'm confused

I'm pretty sure he was talking about the profile settings in general; avatars and things of that nature. All sig images are linked externally.

EDIT: Technically they pay for the text in our sigs, but that's bits :huh: I guess you can say with all the members it can add up to a certain ammount of gigs. :laugh:

It's been over a year here and there's still a discussion about this? The point has been made here: Don't block ads. :sleep:

Edited by oddcrap
  • 3 weeks later...

(Y) Not just because he said it, also because he's right

I use Adblock in FireFox, but I whitelist Neowin. I even click on the ads because it drives money into the site.

What I don't like is mods closing topics about ad blockers, just for the sake of the topic being about ad blockers.

That is simply rediculous.

There are more to some ads than just advertisements. Tracking cookies are put in place based on what you view, and then preferences are set for future ads that you view. I don't want to see that crap all over the place.

Nor do I want to see 3 million stupid avatars. This is why I use an ad blocker. I filter the crap I don't want to see, not to use a filter set to block _all_ ads.

The mods need to stop being so damn obtuse and realize this isn't the only site on the internet with ads. Just because Neowin's aren't annoying, it doesn't mean other's aren't.

OK, one second here. I just want to get one question clear: are we ALLOWED to talk about adblockers but we cannot talk about HOW TO adblock something on Neowin?

Look at this thread. It looked fine for a month... until a certain somebody rampaged through it. It's against the rules of Neowin to discuss the names of adblockers? I thought it was more about the methods that is prohibited, especially those pertaining to Neowin's ads. And judging by that thread, it sure as damn hell looks like it was only names of software that were posted, not actual methods.

I mean hell, TWO staff members were in that thread. If anything, if it was a violation it would've been taken care of long ago. It's over a month old for crying out loud. :rolleyes:

edit: Somnus noticed it already.

Edited by rm20010

OK, so are you saying I should allow discussion on adblocking now? (so long as they don't mention Neowin, yea right I think it pertains to Neowin aswell) hey why don't I just start recommending other sites to go to instead of Neowin at the same time? I could even start paying people to post here. That would close us down overnight and then we won't have to worry about bad old Neobond not allowing discussion on adblocking tools.

I give a lot to the membership here by not throwing ad's in your face like other sites do. You know pop-ups, full page flash ad's and multiple ad's all over the place in annoying positions/flashing and all.

Come on guys it's pure common-sense.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Camtasia 2026.1.3 by Razvan Serea TechSmith Camtasia is the complete professional solution for high-quality screen recording, video editing and sharing. Camtasia 2026 makes editing your videos easier, and faster than ever. The new editor is packed with enhanced video processing, all-new production technology, an innovative library, and stock videos and other creative assets to help you create more polished, professional videos. No video experience needed. Anyone can create informative, engaging videos. Create professional, eye-catching videos: Add special video effects - Apply Behaviors that are perfectly designed to animate your text, images, or icons. Get a crisp, polished look without being a professional video editor. Drag-and-drop your edits - What you see is what you get. Every effect and element in your video can be dropped and edited directly in the preview window. And you can edit at resolutions up to beautiful 4K, for clear video at any size. Get exceptional performance - Camtasia takes full advantage of your computer’s processor with 64-bit performance. You’ll get fast rendering times and enhanced stability—even on your most complex projects. Camtasia 2026.1.3 changelog: Feature Updates Improved keyboard navigability in tool panels. Improved screen reader accessibility of headings in Preferences. Tool panels can now be resized using a keyboard-navigable control. Updated color of folder icon in User Library tab for better visibility. Grouped media now render a composite waveform considering all audio media within that group. Added Long Path Aware to the manifest of Editor and Recorder. Performance Improvements Improved performance for editing groups on the timeline. Improved the project loading performance when timeline has lots of trec media with cursor data. Updates for IT Administrators Updated cpp-httplib from 0.38.0 to 0.43.3. Updated expat from 2.7.4 to 2.8.0. Updated freetype from 2.13.3 to 2.14.3. Updated harfbuzz from 13.0.1 to 14.2.0. Updated libpng16 from 1.6.55 to 1.6.58. Updated pango from 1.57.0 to 1.57.1. Updated girepository from 2.86.3 to 2.88.0. Updated pcre2-posix from 10.47.0 to 12.0.2. Added new harfbuzz-gpu.dll. Updated FFmpeg from 7.1.1 to 7.1.2. Updated aom from 3.11.0 to 3.13.1. Updated dav1d from 1.5.0 to 1.5.1. Updated ogg from 1.3.5 to 1.3.6. Updated SDL2 from 2.32.4 to 2.32.10. Updated zlib from 1.3.1 to 1.3.2. Updated Nalpeiron binaries to version 4.4.69.3. Bug Fixes Fixed an issue which prevented some user submitted crash reports from being sent. Fixed a potential memory leak when decoding HEVC or VP9 video. Fixed a potential crash when trying to delete a range selection on a magnetic track. Fixed a bug with the Properties Panel showing stale properties when only a caption is selected on the timeline. Fixed an issue that could prevent the Opacity and Blur properties from being changed in the Background Removal effect. Fixed an issue where larger Camtasia online projects may fail to open in Camtasia Editor. Table of contents thumbnails are no longer created for Smart Player exports with no table of contents. Fix resetting skew revert to revert just skew and not scale as well. Fixed editing in Snagit with snagX file with Unicode characters. Fixed a bug where grouped visual media could be cropped in some cases. Fixed importing SnagX files with Unicode characters. Localization fixes. Download: Camtasia 2026.1.3 | 309.0 MB (Shareware) View: Camtasia Homepage | Tutorials | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • yeah it seems to be Edge only. The dialog buttons work as expected in Chrome and Firefox. The phone is using Android 16 (OneUI 8.5) and Edge version  149.0.4022.53
    • I'm not aware of this issue, but to help the other guys.  What version of Android are you using? Did you try a different browser? To see if Edge is the issue here.
    • I agree when are you going to read this (really poor BTW) article? Here is a better article so you actually know what is going on and answers questions you had in other comments --> https://arstechnica.com/gadgets/2026/05/speed-boosting-low-latency-profile-is-one-of-the-improvements-coming-to-windows-11/ It is unclear if one will be able to disable the new profile at this point but I am not seeing any reason why one would.
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      510
    2. 2
      PsYcHoKiLLa
      188
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!