Vista Build 5342 Released - Official Topic


Recommended Posts

No, they're not. I know a lot of people that use Telewest blueyonder and only one connects via. USB.

Nearly all UK Cable Modems have a usb port as well as ethernet though :p

The broadband modems that SBCYahoo! and Comcast give out here in the US are USB, with ethernet as well and they encourage users to use USB

Comcast doesn't do DSL. They do USB for Ethernet, however (because lots of folks NEVER go inside their computers). My feelings about USB for Ethernet can be summed up thusly:

"Real computer users use real NICs."

Well, so far nothing revolutionary in 5342 but I guess that's what to be expected. Incremental improvements in things such as the minimize/maximize animation; minimized windows appears out of the taskbar at an angle and zoom up to front & center, seems smoother and a bit more prounounced than before. When logging in, MS is still attempting to fade out the login screen and fade in to the desktop. But at this point, the desktop still flashes to the point of destroying the intended effect. I'm sure it will improve. A few new gadgets there however I had no luck in specifying a folder location for the picture viewer gadget. Anyone else have this issue? I installed Office 12 on 5342 and so far seems to have taken a step backward in stability. Outlook in particular crashes regularly when specifying previews to the right of the message pane using an Exchange 2003 profile and MSN connector. O12 on 5308 in similar usage scenarios seemed better behaved. The large memory footprint is still there, that shouldn't be too surprising at this stage either. This version of media player includes more sample media content with ratings and such pre-applied. Looking nice. The upside-down animated "V" is more prevalent in this build as well, an example being the Welcome Center. Some lower res sample pictures are available in User/Public/Public Pictures and lots of "placeholder" jpegs abound. There's also more sample video media. Aero-glass is still identical to previous builds. When using Flip-3D, the blank desktop appears in the 3d view of windows now, I don't remember seeing that before but I could be wrong. I didn't notice any difference in backgrounds or screensavers. The ten minute hard drive grind fest is gone when first logging in when in previous builds Defrag and indexing commenced. Strangely, as in 5308 the "Reliability Monitor" is gone as a choice in the Computer Management MMC. You need to launch mmc.exe and add it as a snap-in. The defrag console is also gone from the Computer Management MMC. Overall, 5308 is 95% of what 5342 is. It's not a must have upgrade unless there's enhanced driver support for a particular piece of hardware. I'm running a single Dell D810 and everything worked as in previous builds, so I can't comment on increased HW support/drivers. Anyway, sorry for the rambling post, but hope this is helpful to those wondering about 5342.

I can't believe it is not showing up on Connect for me! I am in a TAP program for Vista, and am running Build 5308 now, but 5342 STILL has not shown up. :angry: Grrrrr.

Any other Connect users still not seeing it? I've got a DX9 laptop (Radeon 9600 Mobility) that should run "real glass" if it is in fact in this build, but since it hasn't shown up I cannot check it out!

<Jack Bauer>DAMMIT!!</Jack Bauer>

It's not showing up on Connect for me either and I'm on the TAP. I have a link from the main Vista page:

New 3-24-06 - Click here for X86 and here for X64 to download the newest build v.5342 and click here to request new keys.

But when I click on either X86 or X64, it brings me to another page which says "Error: An object that you requested, or that was needed to process your request could not be found." I've tried froma different PC and am still having the same problem.

It's also not showing up in the downloads. Anyone else having this problem? Is 5342 showing up in the downloads for the ones who do see it?

Well, so far nothing revolutionary in 5342 but I guess that's what to be expected. Incremental improvements in things such as the minimize/maximize animation; minimized windows appears out of the taskbar at an angle and zoom up to front & center, seems smoother and a bit more prounounced than before. When logging in, MS is still attempting to fade out the login screen and fade in to the desktop. But at this point, the desktop still flashes to the point of destroying the intended effect. I'm sure it will improve. A few new gadgets there however I had no luck in specifying a folder location for the picture viewer gadget. Anyone else have this issue? I installed Office 12 on 5342 and so far seems to have taken a step backward in stability. Outlook in particular crashes regularly when specifying previews to the right of the message pane using an Exchange 2003 profile and MSN connector. O12 on 5308 in similar usage scenarios seemed better behaved. The large memory footprint is still there, that shouldn't be too surprising at this stage either. This version of media player includes more sample media content with ratings and such pre-applied. Looking nice. The upside-down animated "V" is more prevalent in this build as well, an example being the Welcome Center. Some lower res sample pictures are available in User/Public/Public Pictures and lots of "placeholder" jpegs abound. There's also more sample video media. Aero-glass is still identical to previous builds. When using Flip-3D, the blank desktop appears in the 3d view of windows now, I don't remember seeing that before but I could be wrong. I didn't notice any difference in backgrounds or screensavers. The ten minute hard drive grind fest is gone when first logging in when in previous builds Defrag and indexing commenced. Strangely, as in 5308 the "Reliability Monitor" is gone as a choice in the Computer Management MMC. You need to launch mmc.exe and add it as a snap-in. The defrag console is also gone from the Computer Management MMC. Overall, 5308 is 95% of what 5342 is. It's not a must have upgrade unless there's enhanced driver support for a particular piece of hardware. I'm running a single Dell D810 and everything worked as in previous builds, so I can't comment on increased HW support/drivers. Anyway, sorry for the rambling post, but hope this is helpful to those wondering about 5342.

Christ, learn to paragraph; even if yer rambling.:laugh: :woot:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • VidCoder 12.20 by Razvan Serea  VidCoder is a DVD/Blu-ray ripping and video transcoding application for Windows. It uses HandBrake as its encoding engine. Calling directly into the HandBrake library gives it a more rich UI than the official HandBrake Windows GUI. VidCoder can rip DVDs but does not defeat the CSS encryption found in most commercial DVDs. You’ll need the NET 8 Desktop Runtime. If you don’t have it, VidCoder will prompt you to download and install it. The Portable version is self-contained and does not require any .NET Runtime to be installed. You do not need to install HandBrake for VidCoder to work. Feature list: Multi-threaded MP4, MKV containers Completely integrated encoding pipeline: everything is in one process and no huge intermediate temporary files H.264, H.265, MPEG-4, MPEG-2, VP8, Theora video Hardware-accelerated encoding with AMD VCE, Nvidia NVENC and Intel QuickSync AAC, MP3, Vorbis, AC3, FLAC audio encoding and AAC/AC3/MP3/DTS/DTS-HD passthrough Target bitrate, size or quality for video 2-pass encoding Decomb, detelecine, deinterlace, rotate, reflect, chroma smooth, colorspace filters Powerful batch encoding with simultaneous encodes Customizable Pickers to automatically pick audio and subtitle tracks, destination, titles and more Instant source previews Creates small encoded preview clips Pause, resume encoding VidCoder 12.20 changes: Updated HandBrake core to 1.11.2. Download: VidCoder 12.20 | 47.0 MB (Open Source) Download: Portable VidCoder 12.19 | 89.3 MB Link: VidCoder Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Too soon, I'm still not over this death!
    • Normally, I admit when a title is clickbait (unfortunately, it's become somewhat necessary to compete against AI-dominated news sections today), but in this case, all supported versions is implied and doesn't need to be spelled out in the title. Of course, I'm covering a Patch Tuesday update bug that is only available to supported Windows SKUs. All our coverage relates to supported Windows software and SKUs only unless we expressly state that it's "unsupported", "unofficial", or "third-party". I'm sorry, but supported/official SKUs don't need to be spelled out as such in every Neowin headline.
    • ALL versions or ALL SUPPORTED versions? Neowin does it again.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      595
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      77
    4. 4
      Michael Scrip
      73
    5. 5
      Steven P.
      66
  • Tell a friend

    Love Neowin? Tell a friend!