The Official NDS Homebrew Thread


Recommended Posts

Well.. .seems the time has come. I'm going over to the US next month and i'll be buying a DS Lite there.

i was thinking of ordering these to go with it:

- SuperCard miniSD

- Max Media Launcher (doens't require an extra cartridge and it's pretty small too)

- 512MB Kingston miniSD card

i guess that's good enough huh? it better be :p

Sounds good to me. You may want to up the SD card to 1 gig though. Trust me, you will really appreciate that extra space. The Max Media Launcher is perfect for the Lite, probably what I will get too "if" I decide to get a Lite as a lot of people have bricked thiers trying to flash it and I don't want to take the risk.

On a side note, I've updated the LE5 skins and made a few other Moonshell skins. If there is any interest, I will post them (doesn't seem to be much interst in this thread though... :wacko: )

I'm kinda interested in DS homebrew, but all the solutions I've seen so far (SuperCard, NeoFlash, etc) take away from the portability of the DS, and will stick even further out in the Lite. If someone comes out with something that is confined to within the Lite's GBA bay, then I'd make a purchase.

As of now that's as small as it gets. Those just came out too, so I doubt there will be anything smaller anytime soon, if at all. It's really not that big a deal. If you want to play any GBA games they will stick out like that as well anyway. It doesn't detract from the portability of the system at all.

  • 2 weeks later...

I've just ordered the Supercard SD, will I be okay using a standard SD card with it, or should I get a high speed one?

www.play.com currently have both 1 gig cards for ?17.99 but the high speed are out of stock at the moment:((

Just wondering if i can get away with standard speed?

The thing with them though is that they are not nearly as compatible with homebrew and the "forbidden" r word. Of the two, defintely go for the G6. The EZ4 is junk from what I've heard. The M3 and Supercard MiniSD versions don't stick out that much. Here's a pic of the M3 in a Lite. Good news is that there is an M3 MicroSD in development so it will be even smaller. No word on when it will be ready though.

Yep, they are made by the same company. You should also note about the G6 though is that it's capacity is in gigabits, not gigabytes. So the one with the biggest capcity, the 4G, is actually only 512 megabytes. Not very much if you plan on having any movies, mp3's, ect.. on it.

so how does this get around flashing the Lite?...

Basically it goes in your DS cartridge slot and bypasses the Nintendo security headers that check to see if it is an authentic Nintendo cart, allowing you to run homebrew, ect.. from your GBA flashcart. Flashing your DS is flashing it with a hacked firmware that doesn't have the authentication code in it, again allowing you to run homebrew from a GBA flashcart. Using a device like the Superkey is much safer on the Lite because when you flash the new firmware, you have to bridge a screw called SL1. On the Lite, there is another small screw right beside the SL1 that when hit, turns off the DS. If you hit it in the middle of flashing, your DS will turn off before the flash is finished, bricking your Lite. A lot of people have bricked thier Lites trying to flash them. I don't want to risk it :p

Basically it goes in your DS cartridge slot and bypasses the Nintendo security headers that check to see if it is an authentic Nintendo cart, allowing you to run homebrew, ect.. from your GBA flashcart. Flashing your DS is flashing it with a hacked firmware that doesn't have the authentication code in it, again allowing you to run homebrew from a GBA flashcart. Using a device like the Superkey is much safer on the Lite because when you flash the new firmware, you have to bridge a screw called SL1. On the Lite, there is another small screw right beside the SL1 that when hit, turns off the DS. If you hit it in the middle of flashing, your DS will turn off before the flash is finished, bricking your Lite. A lot of people have bricked thier Lites trying to flash them. I don't want to risk it :p

So what is the advantage of this to the G6Lite? Because from what I read...they have a version of this that does not stick out of the Lite. Does it also involve flashing firmware?

And also, does the DS Lite function like a regular DS Lite when the Superkey is removed from the DS cartridge slot? I just don't want to do anything to void my warranty.

Oh, and support of sleep mode matters to me as well.

Edited by tlogank

So what is the advantage of this to the G6Lite? Because from what I read...they have a version of this that does not stick out of the Lite. Does it also involve flashing firmware?

And also, does the DS Lite function like a regular DS Lite when the Superkey is removed from the DS cartridge slot? I just don't want to do anything to void my warranty.

G6 Lite is a flashcart, the Superkey is a Passme device. They are used together to be able to run homebrew. As I said in my last post, a Passme device (Superkey in this case, or flashing your firmware) bypasses the secutiry checks, allowing you to run homebrew from the GBA slot.

The G6 and other flashcarts basically act as a hard drive that you run your homebrew files on, store pics, mp3's movies, ect... The "flash" in flashcart doesn't refer to flashing the firmware. It's "flash" as in flashmemory (SD, CF, MiniSD, ect..) because it is an adapter that allows you to plug in flash media to the DS via the GBA slot.

One thing about the G6 is that it has internal flash memory that isn't upgradable (see my post about G6 a few posts up). Where as carts such as M3 or Supercard work as an adapter for CF, SD, or MiniSD. Enabling you to use as much memory as you want, limited only by the size of your CF, SD, or MiniSD cards (I think they are up to 4 gigs now).

As far as your warranty, flashing over your firmware does void the warranty. Using the Superkey though does not. And it does function the same as a regular DS Lite without it in, because it still is one. It's just the same as inserting a DS game cartridge, because it basically is one, sleep mode and all ;)

G6 Lite is a flashcart, the Superkey is a Passme device. They are used together to be able to run homebrew. As I said in my last post, a Passme device (Superkey in this case, or flashing your firmware) bypasses the secutiry checks, allowing you to run homebrew from the GBA slot.

The G6 and other flashcarts basically act as a hard drive that you run your homebrew files on, store pics, mp3's movies, ect... The "flash" in flashcart doesn't refer to flashing the firmware. It's "flash" as in flashmemory (SD, CF, MiniSD, ect..) because it is an adapter that allows you to plug in flash media to the DS via the GBA slot.

One thing about the G6 is that it has internal flash memory that isn't upgradable (see my post about G6 a few posts up). Where as carts such as M3 or Supercard work as an adapter for CF, SD, or MiniSD. Enabling you to use as much memory as you want, limited only by the size of your CF, SD, or MiniSD cards (I think they are up to 4 gigs now).

As far as your warranty, flashing over your firmware does void the warranty. Using the Superkey though does not. And it does function the same as a regular DS Lite without it in, because it still is one. It's just the same as inserting a DS game cartridge, because it basically is one, sleep mode and all ;)

You are incredible with this stuff. Okay, so what are you recommendations (pending your new Superkey) for the best PassMe device and the best Flash adaptor...saying that I wanted to use either SD or miniSD.

And as far as the sleepmode goes, is this being supported yet?

Oh, and what are the advantages of the Superkey over the Passcard?

Edited by tlogank

You are incredible with this stuff. Okay, so what are you recommendations (pending your new Superkey) for the best PassMe device and the best Flash adaptor...saying that I wanted to use either SD or miniSD.

And as far as the sleepmode goes, is this being supported yet?

Oh, and what are the advantages of the Superkey over the Passcard?

The 2 best are the M3 and Supercard. The difference is the M3 plays GBA "the dreaded r words" a tiny bit better, and it has a custom version of an awesome homebrew app called Moonshell built right into it's firmware, and an organizer app built right into it's firmware. That's not a huge deal though bcause you can just grab Moonshell seperately and run it on the Supercard, and the version built into the M3 is actually an old version. Also there is a homebrew organizer app that you can download seperately for the Supercard as well. The M3's file loader has a nice GUI, where as the Supercard's is just text based. The M3 is 2x the price as the Supercard. So if a tiny bit better compatibility with GBA "r word"s and a GUI file loader is worth 2x the price to you, go for the M3. Otherwise the Supercard works great. The MiniSD versions of both of them are the size of a GBA cart, so they will stick out about 1cm, just like a GBA cart. I've heard the M3 team are working on a MicroSD version that will be even smaller. No word on when it will be out though. Haven't heard anything about the Supercard team developing a MicroSD version, but I'm sure they are.

As far as sleepmode goes, both the Superkey and Passcard3 support it.

There doesn't seem to be any difference between the Superkey and the Passcard3. The Superkey is made by the makers of Supercard, and the Passcard3 is made by the makers of M3. Both will work on most flashcards. I went for the Superkey because it was $4 cheaper :p

The 2 best are the M3 and Supercard. The difference is the M3 plays GBA "the dreaded r words" a tiny bit better, and it has a custom version of an awesome homebrew app called Moonshell built right into it's firmware, and an organizer app built right into it's firmware. That's not a huge deal though bcause you can just grab Moonshell seperately and run it on the Supercard, and the version built into the M3 is actually an old version. Also there is a homebrew organizer app that you can download seperately for the Supercard as well. The M3's file loader has a nice GUI, where as the Supercard's is just text based. The M3 is 2x the price as the Supercard. So if a tiny bit better compatibility with GBA "r word"s and a GUI file loader is worth 2x the price to you, go for the M3. Otherwise the Supercard works great. The MiniSD versions of both of them are the size of a GBA cart, so they will stick out about 1cm, just like a GBA cart. I've heard the M3 team are working on a MicroSD version that will be even smaller. No word on when it will be out though. Haven't heard anything about the Supercard team developing a MicroSD version, but I'm sure they are.

As far as sleepmode goes, both the Superkey and Passcard3 support it.

There doesn't seem to be any difference between the Superkey and the Passcard3. The Superkey is made by the makers of Supercard, and the Passcard3 is made by the makers of M3. Both will work on most flashcards. I went for the Superkey because it was $4 cheaper :p

Alright, I know the G6 Lite will have a fixed 512MB. But what about the EZ Lite adapter that has the MicroSD cards? Here is the screenshot...it looks pretty nice:

ez4l-2.jpg

Edited by tlogank
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Same Internet Archive seemed to grab the new version https://web.archive.org/web/20...d/Setup_MakeMKV_v1.18.4.exe Here's the link to an additional file it periodically downloads https://web.archive.org/web/20260213092148/https://www.makemkv.com/sdf.bin I think update's keys, etc. To manually trigger this update, put the sdf.bin file in the root of where the program is installed. When you launch the program it will pick up the file and import it. Typically put it here: C:\Program Files (x86)\MakeMKV\sdf.bin
    • Windows 11 KB5094126, KB5093998 bugging out Office apps but it may not be Microsoft's fault by Sayan Sen Microsoft last week released Windows 11 KB5094126 and KB5093998 as the latest Patch Tuesday updates. Following that the company also published the accompanying dynamic updates under KB5094149, KB5095971, and KB5094156. Although the tech giant did not acknowledge any major problems, some users online reported various issues ranging from OneDrive and Dropbox access problems, BitLocker recovery lockouts, to blue screens and BSODs. You can read about them in this dedicated piece. While there is still no confirmation about those problems from Microsoft the company has admitted to another bug which we did not report on. The tech giant has confirmed it has received reports of an issue in which certain third-party applications may be unable to launch Microsoft Office apps or open Office documents after installing the Patch Tuesday. This affects both Windows 11 as well as Windows 10. The company says the problem impacts a subset of applications that rely on OLE (Object Linking and Embedding) automation to communicate with Microsoft Office programs. According to Microsoft, affected scenarios involve third-party software attempting to open Office applications or documents from within their own interface. In such cases, the Office program may fail to launch altogether, or the requested document may not open. Oddly there may not be any error message, which probably makes the issue difficult to diagnose. The bug affects several Office products, including Word, Excel, PowerPoint, Access, and other apps in the Microsoft Office suite when they are launched through the affected software. These include tax and accounting software such as CCH Engagement and Workpaper Manager, dental practice management solutions like Dentrix and Softdent, as well as the popular research and reference management tool Zotero. Microsoft adds that other applications using similar Office integration methods could also experience the same problematic behavior. To understand the issue it is important to look at OLE, the Microsoft technology involved. OLE allows different applications to work together and share data, while its Automation feature lets one program control another. Thus this enables third-party software to launch Microsoft Office apps, open documents, and perform tasks automatically without requiring users to switch between programs. Because many accounting, healthcare, research, and business applications rely on OLE automation to interact with Word, Excel, PowerPoint, and other Office apps, any disruption can break those workflows. As a result, affected software may be unable to open Office documents or launch Office applications even though the programs themselves continue to work normally. At the moment the company has not provided a permanent fix though it has confirmed that engineers are actively working on a resolution, which will be delivered through a future Windows update. As such additional details will be shared once more information becomes available. In the meantime, Microsoft recommends a simple workaround for affected users whic is to open the Office application or document directly rather than launching it through the third-party program. For enterprise customers and organizations managing larger deployments, Microsoft says an additional mitigation is available. Admins experiencing the problem on their managed devices are advised to contact Microsoft Support for business to obtain and apply the workaround.
    • It saddens me when cars are such dull colours now. Mine is bright metallic blue and I absolutely adore it for standing out in contrast to that depressing backdrop of traffic.
    • Sparkle 2.20.0 by Razvan Serea Sparkle is a free, open-source Windows optimization tool designed to make your PC faster, cleaner, and more private. With Sparkle, you can easily debloat Windows by removing unnecessary apps and services, disable Microsoft tracking to enhance privacy, and apply performance tweaks to boost speed. Its cleaner removes junk and temporary files, while every change is safe and fully reversible. Sparkle also features a modern, user-friendly interface with automatic updates, making system maintenance simple. Explore over 39 tweaks, from disabling telemetry and hibernation to optimizing network and game settings, all aimed at customizing and enhancing your Windows experience. Sparkle supports Windows 10 and 11. Sparkle 2.20.0 changelog: Debloat Tweak has animated border New homepage loading UI New Tweak Modal (Markdown Supported) Refactored GPU Detection Added Tests with vitest Added foobar2000 to apps Added Localsend to apps Updated Modal Styles Added styles for disabled inputs Added Animated Border to debloat-windows tweak Bumped dependencies Refactor System info logic for speed Tweak info modals now support Markdown Added Clear System info cache to settings Redesigned Home Page Loading UI Changed Some Icons around the app Download: Sparkle 2.20.0 | Portable | ~100.0 MB (Open Source) Links: Sparkle Website | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • lol it was a typo, fixed! haha imagine an actual 4TB Gen4 NVMe for $40 in 2026
  • Recent Achievements

    • Reacting Well
      Dys Topia earned a badge
      Reacting Well
    • Conversation Starter
      NovaEdgeX earned a badge
      Conversation Starter
    • One Year In
      Console General earned a badge
      One Year In
    • Week One Done
      Twozo Technologies earned a badge
      Week One Done
    • One Month Later
      Twozo Technologies earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      106
    4. 4
      Steven P.
      88
    5. 5
      ATLien_0
      68
  • Tell a friend

    Love Neowin? Tell a friend!