The Official NDS Homebrew Thread


Recommended Posts

Well.. .seems the time has come. I'm going over to the US next month and i'll be buying a DS Lite there.

i was thinking of ordering these to go with it:

- SuperCard miniSD

- Max Media Launcher (doens't require an extra cartridge and it's pretty small too)

- 512MB Kingston miniSD card

i guess that's good enough huh? it better be :p

Sounds good to me. You may want to up the SD card to 1 gig though. Trust me, you will really appreciate that extra space. The Max Media Launcher is perfect for the Lite, probably what I will get too "if" I decide to get a Lite as a lot of people have bricked thiers trying to flash it and I don't want to take the risk.

On a side note, I've updated the LE5 skins and made a few other Moonshell skins. If there is any interest, I will post them (doesn't seem to be much interst in this thread though... :wacko: )

I'm kinda interested in DS homebrew, but all the solutions I've seen so far (SuperCard, NeoFlash, etc) take away from the portability of the DS, and will stick even further out in the Lite. If someone comes out with something that is confined to within the Lite's GBA bay, then I'd make a purchase.

As of now that's as small as it gets. Those just came out too, so I doubt there will be anything smaller anytime soon, if at all. It's really not that big a deal. If you want to play any GBA games they will stick out like that as well anyway. It doesn't detract from the portability of the system at all.

  • 2 weeks later...

I've just ordered the Supercard SD, will I be okay using a standard SD card with it, or should I get a high speed one?

www.play.com currently have both 1 gig cards for ?17.99 but the high speed are out of stock at the moment:((

Just wondering if i can get away with standard speed?

The thing with them though is that they are not nearly as compatible with homebrew and the "forbidden" r word. Of the two, defintely go for the G6. The EZ4 is junk from what I've heard. The M3 and Supercard MiniSD versions don't stick out that much. Here's a pic of the M3 in a Lite. Good news is that there is an M3 MicroSD in development so it will be even smaller. No word on when it will be ready though.

Yep, they are made by the same company. You should also note about the G6 though is that it's capacity is in gigabits, not gigabytes. So the one with the biggest capcity, the 4G, is actually only 512 megabytes. Not very much if you plan on having any movies, mp3's, ect.. on it.

so how does this get around flashing the Lite?...

Basically it goes in your DS cartridge slot and bypasses the Nintendo security headers that check to see if it is an authentic Nintendo cart, allowing you to run homebrew, ect.. from your GBA flashcart. Flashing your DS is flashing it with a hacked firmware that doesn't have the authentication code in it, again allowing you to run homebrew from a GBA flashcart. Using a device like the Superkey is much safer on the Lite because when you flash the new firmware, you have to bridge a screw called SL1. On the Lite, there is another small screw right beside the SL1 that when hit, turns off the DS. If you hit it in the middle of flashing, your DS will turn off before the flash is finished, bricking your Lite. A lot of people have bricked thier Lites trying to flash them. I don't want to risk it :p

Basically it goes in your DS cartridge slot and bypasses the Nintendo security headers that check to see if it is an authentic Nintendo cart, allowing you to run homebrew, ect.. from your GBA flashcart. Flashing your DS is flashing it with a hacked firmware that doesn't have the authentication code in it, again allowing you to run homebrew from a GBA flashcart. Using a device like the Superkey is much safer on the Lite because when you flash the new firmware, you have to bridge a screw called SL1. On the Lite, there is another small screw right beside the SL1 that when hit, turns off the DS. If you hit it in the middle of flashing, your DS will turn off before the flash is finished, bricking your Lite. A lot of people have bricked thier Lites trying to flash them. I don't want to risk it :p

So what is the advantage of this to the G6Lite? Because from what I read...they have a version of this that does not stick out of the Lite. Does it also involve flashing firmware?

And also, does the DS Lite function like a regular DS Lite when the Superkey is removed from the DS cartridge slot? I just don't want to do anything to void my warranty.

Oh, and support of sleep mode matters to me as well.

Edited by tlogank

So what is the advantage of this to the G6Lite? Because from what I read...they have a version of this that does not stick out of the Lite. Does it also involve flashing firmware?

And also, does the DS Lite function like a regular DS Lite when the Superkey is removed from the DS cartridge slot? I just don't want to do anything to void my warranty.

G6 Lite is a flashcart, the Superkey is a Passme device. They are used together to be able to run homebrew. As I said in my last post, a Passme device (Superkey in this case, or flashing your firmware) bypasses the secutiry checks, allowing you to run homebrew from the GBA slot.

The G6 and other flashcarts basically act as a hard drive that you run your homebrew files on, store pics, mp3's movies, ect... The "flash" in flashcart doesn't refer to flashing the firmware. It's "flash" as in flashmemory (SD, CF, MiniSD, ect..) because it is an adapter that allows you to plug in flash media to the DS via the GBA slot.

One thing about the G6 is that it has internal flash memory that isn't upgradable (see my post about G6 a few posts up). Where as carts such as M3 or Supercard work as an adapter for CF, SD, or MiniSD. Enabling you to use as much memory as you want, limited only by the size of your CF, SD, or MiniSD cards (I think they are up to 4 gigs now).

As far as your warranty, flashing over your firmware does void the warranty. Using the Superkey though does not. And it does function the same as a regular DS Lite without it in, because it still is one. It's just the same as inserting a DS game cartridge, because it basically is one, sleep mode and all ;)

G6 Lite is a flashcart, the Superkey is a Passme device. They are used together to be able to run homebrew. As I said in my last post, a Passme device (Superkey in this case, or flashing your firmware) bypasses the secutiry checks, allowing you to run homebrew from the GBA slot.

The G6 and other flashcarts basically act as a hard drive that you run your homebrew files on, store pics, mp3's movies, ect... The "flash" in flashcart doesn't refer to flashing the firmware. It's "flash" as in flashmemory (SD, CF, MiniSD, ect..) because it is an adapter that allows you to plug in flash media to the DS via the GBA slot.

One thing about the G6 is that it has internal flash memory that isn't upgradable (see my post about G6 a few posts up). Where as carts such as M3 or Supercard work as an adapter for CF, SD, or MiniSD. Enabling you to use as much memory as you want, limited only by the size of your CF, SD, or MiniSD cards (I think they are up to 4 gigs now).

As far as your warranty, flashing over your firmware does void the warranty. Using the Superkey though does not. And it does function the same as a regular DS Lite without it in, because it still is one. It's just the same as inserting a DS game cartridge, because it basically is one, sleep mode and all ;)

You are incredible with this stuff. Okay, so what are you recommendations (pending your new Superkey) for the best PassMe device and the best Flash adaptor...saying that I wanted to use either SD or miniSD.

And as far as the sleepmode goes, is this being supported yet?

Oh, and what are the advantages of the Superkey over the Passcard?

Edited by tlogank

You are incredible with this stuff. Okay, so what are you recommendations (pending your new Superkey) for the best PassMe device and the best Flash adaptor...saying that I wanted to use either SD or miniSD.

And as far as the sleepmode goes, is this being supported yet?

Oh, and what are the advantages of the Superkey over the Passcard?

The 2 best are the M3 and Supercard. The difference is the M3 plays GBA "the dreaded r words" a tiny bit better, and it has a custom version of an awesome homebrew app called Moonshell built right into it's firmware, and an organizer app built right into it's firmware. That's not a huge deal though bcause you can just grab Moonshell seperately and run it on the Supercard, and the version built into the M3 is actually an old version. Also there is a homebrew organizer app that you can download seperately for the Supercard as well. The M3's file loader has a nice GUI, where as the Supercard's is just text based. The M3 is 2x the price as the Supercard. So if a tiny bit better compatibility with GBA "r word"s and a GUI file loader is worth 2x the price to you, go for the M3. Otherwise the Supercard works great. The MiniSD versions of both of them are the size of a GBA cart, so they will stick out about 1cm, just like a GBA cart. I've heard the M3 team are working on a MicroSD version that will be even smaller. No word on when it will be out though. Haven't heard anything about the Supercard team developing a MicroSD version, but I'm sure they are.

As far as sleepmode goes, both the Superkey and Passcard3 support it.

There doesn't seem to be any difference between the Superkey and the Passcard3. The Superkey is made by the makers of Supercard, and the Passcard3 is made by the makers of M3. Both will work on most flashcards. I went for the Superkey because it was $4 cheaper :p

The 2 best are the M3 and Supercard. The difference is the M3 plays GBA "the dreaded r words" a tiny bit better, and it has a custom version of an awesome homebrew app called Moonshell built right into it's firmware, and an organizer app built right into it's firmware. That's not a huge deal though bcause you can just grab Moonshell seperately and run it on the Supercard, and the version built into the M3 is actually an old version. Also there is a homebrew organizer app that you can download seperately for the Supercard as well. The M3's file loader has a nice GUI, where as the Supercard's is just text based. The M3 is 2x the price as the Supercard. So if a tiny bit better compatibility with GBA "r word"s and a GUI file loader is worth 2x the price to you, go for the M3. Otherwise the Supercard works great. The MiniSD versions of both of them are the size of a GBA cart, so they will stick out about 1cm, just like a GBA cart. I've heard the M3 team are working on a MicroSD version that will be even smaller. No word on when it will be out though. Haven't heard anything about the Supercard team developing a MicroSD version, but I'm sure they are.

As far as sleepmode goes, both the Superkey and Passcard3 support it.

There doesn't seem to be any difference between the Superkey and the Passcard3. The Superkey is made by the makers of Supercard, and the Passcard3 is made by the makers of M3. Both will work on most flashcards. I went for the Superkey because it was $4 cheaper :p

Alright, I know the G6 Lite will have a fixed 512MB. But what about the EZ Lite adapter that has the MicroSD cards? Here is the screenshot...it looks pretty nice:

ez4l-2.jpg

Edited by tlogank
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I have a couple to mention, and they still run great on Windows 11 Adobe Lightroom Version 2 Alcohol 120% CLZ Book, Comic, Game, Movie, & Music Collector (PC - No longer sold / Grandfathered in - now mobile apps/online only) DVDDecrypter ISO Buster Pro version 1.9.1 (Still supports HD-DVD too) Nero Burning Rom 8 (Only the burning software, no backup, media converter, etc)   OpenAL (Runtime) - GuildWars 1 Reforged still uses it for 3d headphone audio PowerDVD 12 Ultra SPTD (SCSI Pass through Direct Driver) UltraISO Windows Media Encoder 9 WinImage You can tell I still sport an optical drive    
    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
    • AB Download Manager 1.9.1 by Razvan Serea AB Download Manager is an open-source, feature-rich download manager designed to accelerate downloads, organize files efficiently, and provide seamless control over downloads. With support for multiple connections, resume capability, and an intuitive interface, it enhances the downloading experience for users seeking speed and reliability. The software integrates with various browsers, enabling quick link grabbing and batch downloading. It supports HTTP, HTTPS, and FTP protocols, ensuring broad compatibility with different file sources. Users can schedule downloads, set speed limits, and categorize files automatically for better organization. AB Download Manager is lightweight yet powerful, making it a great alternative to proprietary download managers. Its open-source nature allows developers to contribute, customize, and improve the software as needed. Whether you're downloading large files, managing multiple downloads at once, or seeking an ad-free experience, this tool offers a practical and efficient solution. Key features of AB Download Manager: Multi-Connection Support – Accelerates downloads by splitting files into multiple segments. Resume Capability – Allows paused or interrupted downloads to be resumed without starting over. Batch Downloading – Supports downloading multiple files at once for improved efficiency. Browser Integration – Captures download links directly from browsers for seamless operation. HTTP, HTTPS, and FTP Support – Ensures compatibility with a wide range of file sources. Download Scheduling – Enables users to automate downloads at specific times. Speed Limiting – Lets users control bandwidth usage for optimized performance. File Categorization – Automatically organizes downloaded files into designated folders. User-Friendly Interface – Simple and intuitive design for easy navigation. Cross-Platform Compatibility – Works on multiple operating systems. Ad-Free Experience – No intrusive ads or tracking for a clean user experience. AB Download Manager 1.9.1 changelog: Added An option to customize notification sounds (#1259) Fixed Ongoing notification was laggy on Samsung One UI devices (#1269) Improved Updated Translations Minor UI/UX improvements Download: AB Download Manager 1.9.1 | Portable | ~80.0 MB (Open Source) Download: ARM64 | Portable ARM64 | Android Links: AB Download Manager Website | Github Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • watching him because of the Mr Klinton cat
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      196
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!