Recommended Posts

Finally received Office 2007 in Raleigh, NC.

On a semi-related note: I have my desktop running Vista Business (which I got through MSDNAA) and my laptop is running Vista Ultimate (Vista Business from MSDNAA upgraded to Ultimate this morning for $139. Thank you Windows Anytime Upgrade!).

Finally received Office 2007 in Raleigh, NC.

On a semi-related note: I have my desktop running Vista Business (which I got through MSDNAA) and my laptop is running Vista Ultimate (Vista Business from MSDNAA upgraded to Ultimate this morning for $139. Thank you Windows Anytime Upgrade!).

How did the Anytime Upgrade process work? Did it go smoothly?

How did the Anytime Upgrade process work? Did it go smoothly?

Yea, went pretty well. I ended up ordering an Anytime Upgrade DVD for $7 through the internet (and it turns out I didn't even need it).

I was told that I needed to insert my Anytime Upgrade disk at one point in the process, so I figured I wouldn't be able to upgrade for a few days 'til I got the disk in the mail, but I substituted the Vista Business install disk and it worked just fine.

Oh well, I guess I now have an actual copy of Vista (coming in the mail) rather than the burnt disk I made from the MSDNAA copy of Vista I d/l'd.

:angry: I just discovered something that could have saved me almost $30.

If you have a copy of Vista Business and you want to upgrade to Ultimate via Anytime Upgrade, when asked to select the retailer to purchase the upgrade through select Sam's Club. Rather than the $139 it costs everywhere else for the AU upgrade, it is only $114.

This morning I used AU on my Vista Business and paid $139 (plus $7 for an AU disk, which it turns out you don't need as long as you have a full copy of Vista on disk). By just clicking around a few minutes ago I discovered Sam's Club offering this discounted AU rate.

Has anyone done the upgrade to Ultimate from the www.WindowsAnytimeUpgrade.com/maps ?

Looks like it cost $7 more if you want the Windows Anytime Disc, I think they should offer a download to an .iso of the Anytime Disc.

Do you get a new Product key while the old one becomes invalid? All I see is that you download some software and use the Anytime Disc.

Looks like thare are thress ways to upgrade:

1. Buy an upgrade disc at a store.

2. www.WindowsAnytimeUpgrade.com/maps

3. From the "Welcome Center" in Vista

edit: i just saw agreenbhm post above, I took a long time to post because i left my computer in the middle of my post

Here is how Anytime Upgrade works:

You launch AU from your PC. Select the retailer you wish to buy the upgrade from. Enter your credit card info and all that into the site. Once you've purchased the upgrade, you are given a small file to download. Once you download the file you launch it on the computer. The program asks you to insert your Anytime Upgrade disk and to click "Install Now" (or something like that). All you need to do is put your Vista disk in and let the autoplay menu pop up with the regular Vista installer. Then click "Install" from the menu you are given. You go through the install and choose to upgrade your pc, just like you would if you were performing a regular upgrade from within Windows.

You are not given a new CD key.

So lets say you pay to upgrade business to ultimate if you don't get a new key that would mean every clean install you start from business again how do they verify it's you if you want to go ultimate again? Do you have to do this every time?

So lets say you pay to upgrade business to ultimate if you don't get a new key that would mean every clean install you start from business again how do they verify it's you if you want to go ultimate again? Do you have to do this every time?

I think you need to do this every time because since you are not given a new cd key, the Vista installation software will still read your key as w/e version you purchased originally. It's a PITA but in reality not too big of a deal if you have a couple hours.

My suggestion: make an image of your computer once you've upgraded and have all the basics set up. Then you won't need to deal with installing and upgrading.

For those people that used Windows Anytime Upgrade and don't know how to reinstall Vista:

I contacted Microsoft's Anytime Upgrade phone number at 1-877-666-2296. They told me that your new key would be placed in your digital locker within three days of you upgrading.

They also said that when you want to reinstall Vista that you can call up them and they will help you reinstall Vista Ultimate.

Here is the post regarding Microsoft Office 2007 incase anyone missed it:

Here are the direct links to the files:

MICROSOFT OFFICE 2007 PROFESSIONAL minus Business Contact Manager for Outlook et. al.

http://msft-dnl.digitalrivercontent.net/ms...6/X12-30196.exe

MICROSOFT 2007 Business Contact Manager for Outlook et. al.

http://msft-dnl.digitalrivercontent.net/ms...0/X13-40150.exe

And the MD5s for reference:

63755d66246f105ced224979c0df77c6 *msft-dnl.digitalrivercontent.net/msoffice/pub/X12-30196/X12-30196.exe

0c4705c56b3f68f2bf3dc8eaee9ee7e9 *msft-dnl.digitalrivercontent.net/msoffice/pub/X13-40150/X13-40150.exe

There is suppose to be two downloads but they forgot part 2 on the sleeve that they mailed out.

For those people that used Windows Anytime Upgrade and don't know how to reinstall Vista:

I contacted Microsoft's Anytime Upgrade phone number at 1-877-666-2296. They told me that your new key would be placed in your digital locker within three days of you upgrading.

They also said that when you want to reinstall Vista that you can call up them and they will help you reinstall Vista Ultimate.

Someone who used the Anytime Upgrade should be a brave test subject and do a reinstall and see how many hoops Microsoft makes you jump through to get your Vista Ultimate installed.

Here are the direct links to the files:

MICROSOFT OFFICE 2007 PROFESSIONAL minus Business Contact Manager for Outlook et. al.

http://msft-dnl.digitalrivercontent.net/ms...6/X12-30196.exe

MICROSOFT 2007 Business Contact Manager for Outlook et. al.

http://msft-dnl.digitalrivercontent.net/ms...0/X13-40150.exe

And the MD5s for reference:

63755d66246f105ced224979c0df77c6 *msft-dnl.digitalrivercontent.net/msoffice/pub/X12-30196/X12-30196.exe

0c4705c56b3f68f2bf3dc8eaee9ee7e9 *msft-dnl.digitalrivercontent.net/msoffice/pub/X13-40150/X13-40150.exe

There is suppose to be two downloads but they forgot part 2 on the sleeve that they mailed out.

Are these OEM versions? If not, what are they?

/me hasnt kept up to date in this thread

If you need office 2007 media, order the office 2007 media trial (it comes with a trial cd) which then you can use your retail key on... will cost you $10

Cool idea, thanks! I think I might do this just so I have real media instead of my burned CD's of the installation files.

edit: Can you give me a link to where to order the CD? I can only seem to find the download version.

Are these OEM versions? If not, what are they?

/me hasnt kept up to date in this thread

Those are the direct links for the trial version, which will install as a full install if you use your key from the Power Together mailing.

Edited by roadwarrior
For everyone still thinking where is mine? You WILL have it by this Friday at the latest unless you where late turning in your W9, which will slow it down by a week

Where did this info come from? I faxed in my W9 2 days after we got the emails. Still no packages in the mail as of today. I'm in the Detroit, MI area with a last name that starts with "S"

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!