[Official] New Xbox Experience (or Fall 2008 Update)


Recommended Posts

IT still has ads, but they're less obvious. There's now an entire section of "ads" called "spotlight" and when you're playing a game, the guide sometimes has a link to some content for the game on it, that's about it as far as I can see.

How come I get black bars on the top and bottom when I put it to my native resolution to 1680x1080?
I get the same. Not exactly native now is it...

Because the games are designed for specific aspect ratios, not screen resolutions. You get the black bars to prevent the image being stretched in a strange way because the resolution isn't 1080p or 720p. That was the POINT of this support in the new dash.

Because the games are designed for specific aspect ratios, not screen resolutions. You get the black bars to prevent the image being stretched in a strange way because the resolution isn't 1080p or 720p. That was the POINT of this support in the new dash.

Precisely. It works very well as far as I'm concerned. It's just like watching a 16:9 movie on a 16:10 screen.

Yes, because that's how the 360 works. Basically, everything is created on the GPU in a specific aspect ratio and resolution (usually around 720p), then this gets sent to a special chip inside the 360 that scales it to whatever you selected in the system. Since the source image is a 16:10 aspect ratio, it can either scale it to fit your resolution and distort the hell out of everything, or throw in some black bars so it looks accurate.

Interestingly, the PS3 has no such special chip and this scaling needs to be done by the GPU itself, which is why the PS3 frequently suffers framerate drops the 360 does not.

Well I was just testing out Netflix on my 55' Mitsubishi and for some reason just like when I stream movies from my PC I get the outer edges cut off when its filling the screen up. If I set the movie to the native it just shrinks the picture down to the middle and its really small. (but then I see the full image not stretched) Anybody know whats going on?

When you update your console, the updates are actually stored on the hard drive, same for game updates (they get deleted when you clear your cache). All you have to do is plug your hard drive into your PC (via an adapter) and you can extract these files. It's the exact same file that Microsoft puts up for download on their site.

Well I was just testing out Netflix on my 55' Mitsubishi and for some reason just like when I stream movies from my PC I get the outer edges cut off when its filling the screen up. If I set the movie to the native it just shrinks the picture down to the middle and its really small. (but then I see the full image not stretched) Anybody know whats going on?

Check if your TV has settings for overscan correction. it's most likely set to 5% or more overscan over hdmi or component whatever you're using. a lot of tv's have overscan set and won't let you change it.

Gah, the update isn't working for me. Just won't work. It prompts up that a download is available so I click ''download'' then it just says ''can't download the update''

:(

Did you install the leaked NXE before? If so, that's why - you need the LATEST NXE leak.

When you update your console, the updates are actually stored on the hard drive, same for game updates (they get deleted when you clear your cache). All you have to do is plug your hard drive into your PC (via an adapter) and you can extract these files. It's the exact same file that Microsoft puts up for download on their site.

Oh I see, thanks.

Because the games are designed for specific aspect ratios, not screen resolutions. You get the black bars to prevent the image being stretched in a strange way because the resolution isn't 1080p or 720p. That was the POINT of this support in the new dash.

Yes, I'm well aware of aspect ratios, I figured that they would've designed the dashboard to utilize all screen space, not scale.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
    • In the way that you framed it incorrectly. You wrote: "The constant need to close all browser sessions and wait for a new version to install" There's no "constant need to close all browser sessions". That's factually incorrect. The browser downloads its updates in the background and installs them when you open it again. Silently. And there's no "wait for a new version to install", updates are small and take 2-3 extra seconds AT MOST, if any. If you have an SSD, there's zero extra time. Also, every mainstream browser operates this way. Firefox, the FOSS go-to browser, the default on almost every Linux distro, does exactly the same. Also, you don't need to constantly restart Edge for updates to install, you can completely ignore them and it doesn't even ask you to handle them, it's all silent and automatic. So I don't understand what else do you want.
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      195
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!