[OSx86] My successful hackintosh install


Recommended Posts

My compaq laptop died a while ago due to a video card fail. Since I'm studying graphics design I figured it was worthwhile buying the components to make my own mac so that I can use the OS that the industry uses. This is what I bought:-

post-18827-1248217333.png

Edit:- The CPU is actually an E7600

It cost me just over $AU1,000, which is pretty good going for Australia.

To get me started I used weaksauce's guide, which is the best hackintosh install guide on the net bar none. You can find it here.

I started by first downloading all programs in the guide and burning them to disc, then printing each page of the guide so I could read through it as I was going.

When installing, the only change I had to make to weaksauce's guide was in the BIOS where my SATA mode would only work on "Enhanced" - weaksauce recommended setting it to auto.

Once I got to the mac desktop I ran all software updates. I downloaded Mac OSX 10.5.7 update before I started the project and burnt it to DVD so it would be a quicker install. There were a few restarts involved until all the software was up-to-date.

Once that was done I ran the driver install program that weaksauce created, followed by another restart. Because I had a 1GB 9800GT it wasn't supported by weaksauce's program, so I just followed the guide to install the driver found here.

After another restart I opened up weaksauce's magic boot disk and ran the "about this mac modifier" program. It let my type in the correct name of my CPU and RAM so that it would look nice whenever I click on "about this mac".

Once that was done I was off and running! No more updates needed everything runs as if it was a genuine mac computer! It works super fast and I couldn't be happier!

The good news is that if you want to build a hackintosh but don't know where to start, weaksauce has a few other guides on his site, as well as system recipes for computer configurations that work well.

Here's a screenie of my system up and running:-

post-18827-1248217399_thumb.png

My compaq laptop died a while ago due to a video card fail. Since I'm studying graphics design I figured it was worthwhile buying the components to make my own mac so that I can use the OS that the industry uses. This is what I bought:-

post-18827-1248217333.png

Edit:- The CPU is actually an E7600

It cost me just over $AU1,000, which is pretty good going for Australia.

To get me started I used weaksauce's guide, which is the best hackintosh install guide on the net bar none. You can find it here.

I started by first downloading all programs in the guide and burning them to disc, then printing each page of the guide so I could read through it as I was going.

When installing, the only change I had to make to weaksauce's guide was in the BIOS where my SATA mode would only work on "Enhanced" - weaksauce recommended setting it to auto.

Once I got to the mac desktop I ran all software updates. I downloaded Mac OSX 10.5.7 update before I started the project and burnt it to DVD so it would be a quicker install. There were a few restarts involved until all the software was up-to-date.

Once that was done I ran the driver install program that weaksauce created, followed by another restart. Because I had a 1GB 9800GT it wasn't supported by weaksauce's program, so I just followed the guide to install the driver found here.

After another restart I opened up weaksauce's magic boot disk and ran the "about this mac modifier" program. It let my type in the correct name of my CPU and RAM so that it would look nice whenever I click on "about this mac".

Once that was done I was off and running! No more updates needed everything runs as if it was a genuine mac computer! It works super fast and I couldn't be happier!

The good news is that if you want to build a hackintosh but don't know where to start, weaksauce has a few other guides on his site, as well as system recipes for computer configurations that work well.

Here's a screenie of my system up and running:-

post-18827-1248217399_thumb.png

so is it worth it? i mean what does and does not work? with my specs i could install apple on my pc too.

so is it worth it? i mean what does and does not work? with my specs i could install apple on my pc too.

Everything hardware-wise works. Everything I need software-wise works too. Just like running a normal mac. Of course, I'll be able to get a better guage once I've been using it for a while. The one thing they warn is to disable automatic updates because it is possible that they kill certain things until workarounds are developed. But so far so good.

Why you need Adobe Acrobat in a Mac? OS X by default is built in Portable Document Format.

Umm...this is about building a hackintosh, not a critique of what programs I do and don't install!!

Hey mate where did you buy all that from? Gamedude?

Got everything but the burner and the case from MSY at Morningside. Got those two things from Umart at Milton.

This is very handy to know - seeing as my hardware is all setup now - and just waiting to go buy OSX :)

Do you dual boot at all?

Congrats on the build :)

I haven't installed my PC's HDD so I can dual boot with Windows 7. I might do that down the track though. Note that you can't use bootcamp with a hackintosh; it's something to do with EFI.

Yeah knew about bootcamp. So I could partition my drive - do the OSX install on one partition, get it all working...

Then install 7 to the second partition?

Install Windows 7 first, then OS X Leopard, then add a chain to your MBR. I don't think Bootcamp works on standard PCs, although I could be wrong.

I wish Apple could release Leopard to the PC, I really want to buy OS X Leopard and would totally use it.

id have to dual boot to be able to sync and flash custom roms to my winmo ppc. thats the only downfall. i also own a 9800gt, i wonder if it would work ok or not? also as far as printers would hp be supported? i hate insanleymac, they never answer your questions!

I like that wallpaper. Mine sharing? :p

Nice configuration. Just bought myself a MacBook Pro, and I love OSX.

That wallpaper is one of the default ones that come with OSX leopard. If you don't have it already on your Pro then send me a PM with your email and I'll send it to you. I don't want to post it publicly because it's not mine to distribute.

id have to dual boot to be able to sync and flash custom roms to my winmo ppc. thats the only downfall. i also own a 9800gt, i wonder if it would work ok or not? also as far as printers would hp be supported? i hate insanleymac, they never answer your questions!

Pretty much all printers work out of the box. Just plug and play. Your 9800GT will work once you install the driver I put in my initial post. Not sure, but could you use a program like Parallels to do what you need? That way you'd be running windows in a virtual machine.

I've had a really good experience with insanelymac. But I did do a lot of research first, then posted my rig and asked for opinions. The buyers recommendations forum is really good.

i have 8gb ram installed, will mac recognize and use it?

I think you have to install OSX with 4GB RAM installed and once you're up and running plug in the remaining 4GB. It should work fine then.

Any smart person knows they should never goto Gamedude.

Nice PC mate, where'd you get the OSX from?

I thought it sounded a bit rich for $1k though, shouldn't it have been a bit cheaper?

I got OSX through the Apple store together with an Apple keyboard. Weaksauce's guide uses the retail disc, and while it did cost me $158 I'm glad I bought it.

I think I got a good deal. Taking into account there's a new monitor, case, OSX and an Apple Keyboard.

@Raa

Where else is good and cheap to buy PC parts in Brisbane besides Gamedude? I know they have a rep for having a terrible returns and repairs policy, but their prices are pretty cheap.

Point me in the right direction lol

I know that was @Raa, but I always compare prices between MSY, gamedude, umart and PC Shopper.

lol it seems everytime some mentions insanleymac, it follows by "they never answer your questions!". is it really that bad over there!

Believe it or not, there ARE people who are willing to help. You just have to find the right people ;)

I actually got Mac OS X to work on my Acer Aspire 6920G, although with a few things not working (Wireless, which is being developed here). The sound also didn't work, so with a little help I managed to mod the apple drivers to work with my soundcard, although it took a LOT of research and time to get it working. I'm not currently using Mac OS X but once the wifi drivers are built I'll be sure to use it more often.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • This Chinese company is reportedly developing a feature Apple and Samsung can only dream of by Hamid Ganji While companies like Apple and Samsung have been relatively conservative with their devices’ battery capacities in recent years, Chinese manufacturers have taken the competition to the next level by introducing significantly larger batteries. However, the latest report from China suggests that a local company may already be developing a smartphone with a whopping 14,000mAh battery. Chinese leaker Digital Chat Station claimed on Weibo that a smartphone maker is developing a device with a 14,000mAh battery. If true, it would be the largest battery ever used in a smartphone and could, in theory, provide up to a week of battery life on a single charge. The leaker did not reveal the name of the company behind the device, but there are some clues. This week, HONOR unveiled the X80 Pro Max in China with an 11,000mAh battery and 90W wired charging support. The company also launched the Honor Win in January, which packs a 10,000mAh battery. HONOR, a former subsidiary of Huawei, has a proven track record of developing smartphones with unusually large batteries. However, other Chinese brands, including Xiaomi, have also launched devices such as the Xiaomi 17 Pro Max with 7,500mAh batteries. Though Chinese users on Weibo also believe the company behind the new battery is HONOR. Interestingly, Digital Chat Station said the device with the 14,000mAh battery weighs around 220 grams, making it lighter than the Apple iPhone 17 Pro Max (233 grams) and slightly heavier than the Samsung Galaxy S26 Ultra (214 grams). The iPhone 17 Pro Max currently packs a 5,088mAh battery in eSIM-only versions, while the Galaxy S26 Ultra features a 5,000mAh battery. Neither device is expected to see a dramatic increase in battery capacity in its next-generation successor. So when it comes to battery comparison, Chinese brands are unbeaten. HONOR smartphones are currently available in the EU, but the Chinese brand has no official presence in the United States due to restrictions imposed by the U.S. government.
    • Qualcomm takes on NVIDIA with new Dragonfly CPU and AI chips by Pradeep Viswanathan Microsoft, Google, Amazon, AMD, Meta, Apple, OpenAI, and several others have been developing their own chips for AI infrastructure. However, NVIDIA still remains the dominant player in the market. Today, Qualcomm announced a major expansion of its data center infrastructure portfolio to better compete with NVIDIA. The new lineup includes the Qualcomm Dragonfly C1000 CPU, Qualcomm High Bandwidth Compute technology, the Dragonfly AI300 inference accelerator, new connectivity products, and custom silicon solutions. Qualcomm claims that this new lineup improves performance per watt, token throughput, and total cost of ownership for AI data centers. The Dragonfly C1000 is a new data center CPU built with Qualcomm’s custom Oryon cores. This chip will feature more than 250 cores, frequencies above 5GHz, and a chiplet-based design. Qualcomm claims that this new C1000 can deliver more than 2x better performance per watt compared to existing server CPU offerings based on specifications. The Dragonfly C1000 will support PCIe Gen 7 with more than 2TB/s of connectivity, along with CXL, advanced RAS features, and both air and liquid cooling. Qualcomm expects the Dragonfly C1000 to be commercially available in 2028. Additionally, Qualcomm and Meta announced a multi-year, multi-generation agreement under which Qualcomm will supply Dragonfly C1000 data center CPUs for Meta’s next-generation server fleet. Qualcomm also announced High Bandwidth Compute, a new near-memory computing architecture designed to address AI’s memory bandwidth bottleneck. HBC Gen 1 will debut with the Dragonfly AI250, which is expected to sample in mid-2027. The AI250 will deliver 133TB/s per card, an 18x increase in effective memory bandwidth compared to the AI200 with LPDDR5X. The new Dragonfly AI300 with HBC Gen 2 is a rack-level AI inference platform from Qualcomm. Qualcomm claims that the AI300 can deliver 4x to 8x better performance per watt compared to existing GPU-based architectures based on memory bandwidth per watt per card. The Dragonfly AI300 is expected to be available in 2028.
  • Recent Achievements

    • Week One Done
      Meta Plast earned a badge
      Week One Done
    • First Post
      kinowa earned a badge
      First Post
    • Rookie
      krychek57 went up a rank
      Rookie
    • Grand Master
      Jaybonaut went up a rank
      Grand Master
    • One Year In
      Philsl earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      461
    2. 2
      +Edouard
      171
    3. 3
      PsYcHoKiLLa
      136
    4. 4
      Michael Scrip
      78
    5. 5
      Xenon
      77
  • Tell a friend

    Love Neowin? Tell a friend!