Recommended Posts

$20 for nearly a dozen hours worth of new content?

I think it is worth it. Bethesda know how to do DLC.

I didn't mean the length of it, I just meant the content. I have no interest in werewolves or vampires. When my character got turned into a werewolf the first thing I did was look on the internet to see if there was a way to cure it.

There is the other storyline where you don't become a vampire.

The vampire questline doesn't interest me either. Mainly because vampires haven't been cool since Twilight.

Whatever the case, I haven't played this game for a while anyways so I'm in no rush. And I'm sure they will offer a Game of the Year edition eventually that will have all the dlc for like $40 or less.

Woah woah woah. I just went and looked for details on the PS3 Dawnguard, and the first link says that the release date will be September 30th, for a price of $60!

That can't be right, given the prices for the expansion everywhere else. Can someone verify or correct this for me?

EDIT: If it's possible to check this before the end of the work day that would be great. It'll be the difference between lugging my PS3 with me over the weekend or leaving it at home.

Woah woah woah. I just went and looked for details on the PS3 Dawnguard, and the first link says that the release date will be September 30th, for a price of $60!

That can't be right, given the prices for the expansion everywhere else. Can someone verify or correct this for me?

EDIT: If it's possible to check this before the end of the work day that would be great. It'll be the difference between lugging my PS3 with me over the weekend or leaving it at home.

Not true. The reason it hasn't released yet is due to performance.

I guess when it is released it'll be the same price it is on Steam.

http://www.computera...th-performance/

when i do end up getting Dawnguard i will not be playing the vampire quest line at all. I will do the dawnguard side of it.

I am running 2 chars right now. One is a heel(villian), the other is a hero. I will be doing both sides. Just depending on which one I am running at the time. Dawnguard is installing now.

Wow. So basically the Dawnguard quest line is the exact same as the vampire quest line with subtle differences. Masters of the re-hash/re-use. I might finish playing it on my nord barbarian in a few weeks. Going through the exact same story line again after just completing doesn't interest me. I was excited to see new dungeons by playing on the other side. Oh well, bring on the vampire side missions instead.

I wasn't keeping track but I'd say probably around 10-12 hours of gameplay on the main story line.

I still think its worthwhile DLC. Vampire form is really fun and the new follower is pretty bad ass if you can take her emo attitude ;).

Wow the PC version has me more excited playing it then I did the PS3 version lol. Does anyone have any mods they can recommend that worth using?

A few pages back I posted a bunch of mods that I would recommend. I haven't played in a while though, so there may be better alternatives to some of them.

Is it just me, or does this game force you into hording? I have SO much stuff in my house that I will never do anything with. I would love to sell it all, but it is just too much work and with merchants not having much gold anyway it seems like a waste of time. Also, once you buy a house and fill it with all the furnishings there isn't much else to buy in the game. I'm trying to pull back my need to pick up everything I see, and definitely stop picking every damn herb I come across because I just have WAY too much as it is.

This game really needs a money sink. Even if it were equipment repairs or something like that. The game economy is pretty uninteresting.

Wow the PC version has me more excited playing it then I did the PS3 version lol. Does anyone have any mods they can recommend that worth using?

After trying out quite a few different mods, I have the following advice:

* If the mod changes the game radically, try the mod out before committing to it. Realize that once you have a few saved games with a mod that changes the skill trees, adds/modifies items, changes quests, and/or adds/modifies creatures (and probably other things that I haven't mentioned) that there may be no going back. My Nord Barbarian character is currently playing on a heavily modded game, and the Dawnguard update introduced too many bugs to be playable. I'm now waiting for the mods to be updated for compatibility, and even then I may have just a corrupt saved game file. I'm experiencing bizarre bugs, like every time I open a door I get a point in Lockpicking........ not what I want.

* Use Nexus Mod Manager. You can install/uninstall manually, but if you are using different mods for different saved games then a mod manager helps you change the installed mods much more easily.

* Consider only modding stuff that you need to because of an annoyance in the game. Different people have different annoyances, so I wouldn't recommend installing everything that someone else has installed just because.

* Probably the only *must have* mod I've come across is SkyUI. I've gotten to the point where I don't like to the play the game without it because inventory management is a head ache with all the crap you accrue anyway.

Is it just me, or does this game force you into hording? I have SO much stuff in my house that I will never do anything with. I would love to sell it all, but it is just too much work and with merchants not having much gold anyway it seems like a waste of time. Also, once you buy a house and fill it with all the furnishings there isn't much else to buy in the game. I'm trying to pull back my need to pick up everything I see, and definitely stop picking every damn herb I come across because I just have WAY too much as it is.

This game really needs a money sink. Even if it were equipment repairs or something like that. The game economy is pretty uninteresting.

It is definitely not just you... I am also a hoarder. My first house is full of weapons, books, scrolls, staves, herbs, misc stuff, etc., etc.. I don't think I will ever do anything with most of those things. I collect stuff not only because of money but because I am always thinking that that one is the special pot/pelt/weapon/etc that I will need to save the world.

http://www.collegehu...skyrim-hoarders

The economy as you mention is pretty bad. Selling things is absolutelly annoying because the amount of gold the merchants have is a joke. At fisrt I was worried about getting money but now I have over 300000 (without cheating) and I don't know what to do with that since I already own most of the houses and have them fully furnished.

After completing the quest of the Stones of Barenziah getting money is even easier because the amount of precious stones you find is ridiculous. Although completing this quest is not easy by any means since the stones are scattered all over Skyrim.

Is it just me, or does this game force you into hording? I have SO much stuff in my house that I will never do anything with. I would love to sell it all, but it is just too much work and with merchants not having much gold anyway it seems like a waste of time. Also, once you buy a house and fill it with all the furnishings there isn't much else to buy in the game. I'm trying to pull back my need to pick up everything I see, and definitely stop picking every damn herb I come across because I just have WAY too much as it is.

I don't often promote cheating even in single-player games, but I after how much I've played, I find these "cheats" essential when replaying. Just type them into the console if you're playing on PC.

Vendors will buy stolen goods (because their psychic knowledge of what's stolen is silly...)

player.modav BypassVendorStolenCheck 1

Vendors buy all goods (e.g. blacksmith will buy clothes)

player.modav BypassVendorKeywordCheck 1

The second one is great mostly because it sucks being loaded with items, waiting 'til day before you can actually sell, then having to find the right people to sell it to and hoping they even have enough gold to buy all the crap off of you. Yes, I get that you're supposed to manage your inventory better, but when you sit there managing it more than playing the game, only to kill a dragon and have to pick up them heavy bones... Yeah, definitely not the most fun on your 4th time through the game like me. :p

Hope that helps.

This topic is now closed to further replies.
  • Posts

    • Rufus 4.15.2393 Beta 2 by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2393 Beta 2 changelog: Add RISC-V 64 support to UEFI:NTFS Improve the guards for using the "silent" option Improve the ability to cancel during write retries Improve progress reporting for compressed image extraction Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta 2 | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Tixati 3.43 by Razvan Serea Tixati is a free and easy to use BitTorrent client featuring detailed views of all seed, peer, and file transfer properties. Also included are powerful bandwidth charting and throttling capabilities, and a full DHT implementation. Tixati is one of the most advanced and flexible BitTorrent clients available. And unlike many other clients, Tixati contains NO SPYWARE, NO ADS, and NO GIMMICKS. Tixati portable version is meant to run on a USB flash drive or other portable media. It stores all its configuration files in the same folder as the executable binary files, and all file paths are stored in a format relative to the program executable folder. It is important you do not delete the "tixati_portable_mode.txt" file within the executables folder. This file is what triggers Tixati to run in portable mode. (The executable binaries are actually the same as the standard edition binaries.) When running the portable edition from a USB flash drive, especially one that is formatted in FAT16/FAT32, you may experience some lag when initially loading a new transfer. This is because initializing and allocating large files on flash-based media consumes a greater amount of time and resources compared to a conventional hard-drive. Tixati has the following features: detailed views of all aspects of the swarm, including peers, pieces, files, and trackers support for magnet links, so no need to download .torrent files if a simple magnet-link is available super-efficient peer choking/unchoking algorithms ensure the fastest downloads peer connection encryption for added security full DHT (Distributed Hash Table) implementation for trackerless torrents, including detailed message traffic graphs and customizable event logging advanced bandwidth charting of overall traffic and per-transfer traffic, with separate classification of protocol and file bytes, and with separate classification of outbound traffic for trading and seeding highly flexible bandwidth throttling, including trading/seeding proportion adjustment and adjustable priority for individual transfers and peers bitfield graphs that show the completeness of all downloaded files, what pieces other peers have available, and the health of the overall swarm customizable event logging for each download, and individual event logs for all peers within the swarm expert local file management functions which allow you to move files to a different partition even while downloading is still in progress 100% compatible with the BitTorrent protocol Windows and Linux-GTK native versions available Tixati 3.43 changelog: Several major DHT improvements Added several screening heuristics to filter malicious DHT nodes, prevent Sybil floods Rewrote DHT search algorithms to add support for multi-path lookups Improved DHT logging, more details in several error messages Extended timeout lengths for outgoing queries over I2P Added incoming query / response per second to DHT table status display Updated Regex engine to PCRE2 Faster Search function, scans channel user profiles in much less time Fixed problems with file name parsing and date handling in RSS Faster and more accurate RSS filtering and episode number detection Several optimizations to global text processing functions, such as UTF-8 cleaning, line splitting, and token parsing Complete update of port-mapping UPNP/NAT-PMP engine, added PCP support, mapping over VPN support, and more Several refinements to default gateway detection on Windows / Android, which is used for port-mapping Support for IPv6 interface-scoped addresses, which is sometimes needed for IPv6 gateway detection and port mapping Full support for PCP port remapping, added backup zero-port query in case requested port is rejected New UPNP/NAT-PMP Monitor in Help > Diagnostics New reflected local port/location tracker that analyzes DHT replies to detect true port/location and NAT mapping type New TCP/UDP Ports monitor in Help > Diagnostics, with several statistic and information tabs, and a detailed event log Calculated/reflected local port is now used for port parameter in tracker queries and peer handshake Fixed several problems with Linux Wayland compatibility Completely replaced tray icon functions in Linux, new SNI implementation is now the default with GSI backup Implemented full DBus-Menu server to be used by new SNI tray icon implementation Replaced Linux tray balloon notification DBus client Rewrote auto-shutdown DBus interface for Linux Rewrote sleep inhibit DBus interface for Linux Dropped deprecated Linux dbus-glib dependencies Completely new Windows asynchronous file handling, now using IOCP model with several block-alignment optimizations Better handling of system network resets and interface down/up cycles Added option to fully clear configuration in Settings > Import/Export Remember last option checkboxes when using Import/Export Fixed minor I2P incoming connection routing problems Much faster I2P vanity host name finder Much faster channel user vanity key finder Raised length limit for torrent tracker remote failure messages to 120 from 64 Fixed problems setting download location on a torrent before the meta info is resolved Added location/MOC paths to category pane tooltips Several minor Web Interface fixes Refinements to static and scrolling ellipsizing layout routines Several fixes and improvements to single and multi-line text edit controls Many other minor fixes throughout the user interface A major overhaul of the Android framework has also been done: API target raised to 35, page alignment set to 16K Rewrote all inset processing routines Full rewrite of foreground service, application, and main activity objects New permission request routines Added multi-cast lock request before UPNP/LPDP discovery operations Fixed file permission and locking problems when loading .torrent from web browsers Fixed problems with Z-ordering of modal / non-modal and popup windows Fixed handling of back gesture on newer OS Added status bar icon adjustment based on status bar background color Added option in Settings > UI > Behavior to continue running in tray when task removed from recents App can be closed by swiping away notification Rewrote IME interface, fixed several problems with auto-correct, on-screen keyboard visibility, and cursor positioning Added full support for Android hardware mouse and keyboard function Added full tooltip implementation for Android hovering via mouse or other cursor device Full rewrite of popup menu widgets to better support hardware pointers and keyboard Added mouse cursor updating framework for Android hovering Added Settings > Import/Export to Android builds Added language file support to Android builds Download: Tixati 64-bit | Tixati 32-bit ~20.0 MB (Freeware) Download: Portable Tixati 3.43 | 114.0 MB Download: Tixati 3.43 for Linux | Android View: Tixati Website | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Firefox 152.0.1 by Razvan Serea Firefox is a fast, full-featured Web browser. It offers great security, privacy, and protection against viruses, spyware, malware, and it can also easily block pop-up windows. The key features that have made Firefox so popular are the simple and effective UI, browser speed and strong security capabilities. Firefox has complete features for browsing the Internet. It is very reliable and flexible due to its implemented security features, along with customization options. Firefox includes pop-up blocking, tab-browsing, integrated Google search, simplified privacy controls, a streamlined browser window that shows you more of the page than any other browser and a number of additional features that work with you to help you get the most out of your time online. Firefox key features Enhanced Tracking Protection (ETP) – Blocks trackers, cookies, cryptominers, and fingerprinters by default. Private Browsing Mode – Deletes history, cookies, and temporary files when closed. Lightweight & Fast Performance – Optimized memory usage with efficient page loading. Cross-Platform Sync – Sync bookmarks, passwords, history, and open tabs across devices. Customizable Interface – Toolbars, themes, and extensions can be tailored to user needs. Strong Privacy Controls – Options to manage cookies, permissions, and site data easily. Reader Mode – Strips away clutter for distraction-free reading. Pocket Integration – Save and read articles offline with Pocket built into Firefox. Picture-in-Picture (PiP) – Watch videos in a floating window while multitasking. Extensions & Add-ons – Vast library for productivity, security, and personalization. Built-in PDF Viewer – No need for external software to view PDFs. Firefox Monitor – Alerts users if their email is part of a known data breach. Multi-Account Containers – Isolate browsing sessions (e.g., work, personal, shopping). Performance & Resource Efficiency – Uses fewer system resources than some competitors. Open Source & Community-Driven – Transparent development with global contributions. Firefox 152.0.1 fixes: Fixed frequent crashes affecting users with Intel Raptor Lake processors. (Bug 2039575) Fixed an issue on macOS where choosing a PDF option, such as "Save as PDF", from the system print dialog would send the job to your printer instead of saving a file. (Bug 2047850) Download: Firefox 64-bit | Firefox 32-bit | ARM64 | ~70.0 MB (Freeware) Download: Firefox for MacOS | 146.0 MB View: Firefox Home Page | Release Notes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Zed 1.7.2 has landed with updated OpenCode models, bug fixes and other improvements by David Uzondu Zed 1.7.2 recently landed on the stable release channel, bringing a host of AI-related features including automatic context compaction and settings-based skill management, along with other things like better Markdown preview rendering and custom git commands in the graph view. Starting with the AI stuff, the developers introduced "/compact", a command that basically summarizes your conversation history on demand. This tool prevents your active chat window from hitting token limits by compressing older parts of the dialogue into a brief overview. In addition to that, the team relocated skill management to the settings UI, improving how the application communicates errors regarding those skills, and updated the OpenCode model roster to support DeepSeek V4 Flash, MiniMax M3, Qwen 3.7 Plus, and Nemotron 3 Ultra Free. External agent users can also monitor context window cost metrics and delete individual sessions directly from their history. Right-clicking ref labels in the git graph now opens a context menu that runs different actions against selected targets, kind of how VS Code does it. Here are some of the bug fixes this new release brings: The active agent fails to auto-select when creating a new git worktree. A scrollbar unexpectedly appears on wrapped code blocks in the agent chat. Collapse indicators for project headers appear when performing sidebar searches. Bracketed ellipsis title prefixes fail to show the ellipsis icon properly. Project icons render incorrectly in the recent projects picker. Diff hunk controls appear inside non-editable commit view multibuffers. The software update button hangs indefinitely on the downloading stage. Restoring an agent terminal in a remote project triggers a sudden crash. Splitting a pane that contains an active commit view causes a crash. Linux Wayland freezes when trying to read the clipboard from laggy external apps. Zed is a "newish" code editor trying to break the massive stronghold VS Code has on the developer community. Funny enough, the editor was created by former GitHub employees who worked on the Atom text editor (which Microsoft killed in 2022, several years after it bought GitHub). The project officially hit version 1.0 back in April, introducing platform parity for Windows and Linux alongside deep support for DeepSeek-V4-Pro.
    • 26H2 absolutely will support ARM Windows just not on devices that came with 26H1. This is evident by the fact I am running 26H2, which on my MacBook Neo and Surface Pro 12 (inch), within a VM.
  • Recent Achievements

    • One Year In
      hhgygy earned a badge
      One Year In
    • One Month Later
      AMV earned a badge
      One Month Later
    • Week One Done
      AMV earned a badge
      Week One Done
    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      523
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      78
    4. 4
      Steven P.
      72
    5. 5
      Michael Scrip
      71
  • Tell a friend

    Love Neowin? Tell a friend!