Recommended Posts

6 hours ago, Raphaël G. said:

Could you test if Preview 9 improves this? I silently released preview 9 here.

I tested something as a whim, when my monitor is @60hz it works fine, but when I bump my refresh rate up to 144hz or 165hz it doesn't work.  So @ 60hz it's working great.  Not sure why it would not work at a higher refresh rate...

Spectrum Analyzer bug:
 

I have a duel monitor setup, one is 1080p @ 60hz, the other is 1440p @ 166hz, there is a bug in the NVidia drivers that causes stuttering in windows when two displays are using different refresh rates.  I tested this bug with both monitors @ 60hz and everything works fine.  When I bumped my main monitor up to 165hz is when the stuttering starts in Spectrum Analyzer.  I suspect this issues is being caused by the NVidia driver.  I have only seen this behavior in the edge browser for video playback, the new Chromium browser somehow is not affected by this bug.

Nvidia bug info

@Ravensky Thank's a lot for this information! That might explain why I have problems reproducing it on my computer. I've updated the issue information on the Dopamine GitHub: https://github.com/digimezzo/Dopamine/issues/987

 

It's indeed, not clear why it only happens on now playing.

 

Edit:

 

@Ravensky and @Jackaluichi,

 

Unfortunately I don't have any monitor which has a framerate higher than 60. So can I ask the following?

Could you try out the build that I put on my dropbox: https://www.dropbox.com/sh/fqvqotogo2jv7kr/AAC54ENOFA89y78d30bMihRWa?dl=0

That build is also called "preview 9" and you should be able to install it over your current version. That build removes the image on now playing. I'd like to know if that improves the situation.

 

Thank you!

@RavenskyThanks for all the information, mate.

 

I also have a dual monitor setup, a 24" Dell 60Hz, but it's almost always switched off, and my main one is an UltraWide 2560x1080 144 Hz. My graphics card, however, is a Radeon RX Vega 56, so I don't think this is a problem exclusive to NVIDIA drivers. I have just tested using a refresh rate of 60 Hz, and just like in your case the problem dissappears. But I've also discovered something else. Even while keeping the refrest rate at 144 Hz, if I close Dopamine in the 'Now Playing' section, when I open it again and press play, the problem goes away as well, but it returns as soon as I switch to any other section within Dopamine.

 

Cheers!

5 minutes ago, Raphaël G. said:

@Ravensky and @Jackaluichi,

 

Unfortunately I don't have any monitor which has a framerate higher than 60. So can I ask the following?

Could you try out the build that I put on my dropbox: https://www.dropbox.com/sh/fqvqotogo2jv7kr/AAC54ENOFA89y78d30bMihRWa?dl=0

That build is also called "preview 9" and you should be able to install it over your current version. That build removes the image on now playing. I'd like to know if that improves the situation.

 

Thank you!

I've just tested it, and I'm afraid it doesn't make any difference at all.

23 minutes ago, Jackaluichi said:

I've just tested it, and I'm afraid it doesn't make any difference at all.

Thanks! So I can rule that one out.

 

Your observation about starting on now playing, and then opening another screen is quite interesting. In that case, does the stutter happen on another screen than the now playing screen?

6 minutes ago, Raphaël G. said:

Thanks! So I can rule that one out.

 

Your observation about starting on now playing, and then opening another screen is quite interesting. In that case, does the stutter happen on another screen than the now playing screen?

In that case, when I go back to the general view the stutters happen for a brief moment and then they just go away on their own. This bug seems like one of the most weird ones I've come across in a while.

7 minutes ago, Jackaluichi said:

In that case, when I go back to the general view the stutters happen for a brief moment and then they just go away on their own. This bug seems like one of the most weird ones I've come across in a while.

Very strange indeed. How is the spectrum analyzer on the cover and the micro player?

While Dopamine is running and playing music on the Now Playing screen if I switch from 60hz to 120hz or 144hz or 165hz it will instantly start stuttering, (not the music playback just the analyzer) and when I switch back to 60hz while it is still playing it will correct itself and run fine.  So it is definitely tied to the refresh rate of the monitor.  If Dopamine is on the default playback window there is no affect at any refresh rate it just works fine on all.

Hi everyone!

 

Dopamine 2.0 preview 10 is ready for consumption. This release has a very short, but interesting, change log:

 

– [Fixed] Lyrics “Search again” doesn’t work
– [Fixed] High CPU and memory usage

 

For this preview, I spent quite some time optimizing memory en CPU usage. On my test system, this was a success. Hopefully this preview treats you as well as it did me 🙂

 

Enjoy!

 

As always, you can download it here

  • Like 2
  • Thanks 1

Another preview is available. I've been handling small annoyances that some people reported. Here's the change log:

 

– [Fixed] Short sound after starting up
– [Fixed] Zero-sized images which are embedded in audio files, are mistakenly treated as valid images.

 

Download here

 

 

  • Like 1
  • Thanks 1
2 hours ago, Raphaël G. said:

Another preview is available. I've been handling small annoyances that some people reported. Here's the change log:

 

– [Fixed] Short sound after starting up
– [Fixed] Zero-sized images which are embedded in audio files, are mistakenly treated as valid images.

 

Download here

 

 

Thanks, Raphaël! 😄
How's the spectrum analyzer stutter's investigation going? 🤔

58 minutes ago, Jackaluichi said:

Thanks, Raphaël! 😄
How's the spectrum analyzer stutter's investigation going? 🤔

Not good :( I have no idea how to explain what is going on. Also, the fact that I don't have the tools to reproduce it, doesn't help.

21 hours ago, Raphaël G. said:

Not good :( I have no idea how to explain what is going on. Also, the fact that I don't have the tools to reproduce it, doesn't help.

If I were rich, I would give you a 144 Hz monitor away 😜

1 hour ago, Jackaluichi said:

If I were rich, I would give you a 144 Hz monitor away 😜

Hehe thanks :) But no need. I'll find another way somehow. Maybe some other developer can assist. You aren't a developer by any chance? :)

41 minutes ago, kukata said:

@Raphaël G. Hello! When starting the player a brief moment (2-3 secs) from a song of the last played album is been played. He's been having this problem for a long time. It's not the new build.

Preview 11 is also doing that? I hoped I fixed that in preview 11.

Made this account just to ask, so sorry if that's frowned upon in this forum, but I might stick around because the community seems cool 😀

 

I've downloaded Dopamine to replace VLC and from what little time I've used it it seems awesome already, but when I try to make Dopamine the default audio player in the "Default apps" menu as well as in the control panel, it doesn't show up on the list of programs able to be selected. Additionally, searching for Dopamine in the search bar only brings up the playlist folder it creates in "C:\Users\[NAME]\Music", but not the application file itself or its own folder I installed it to.

 

I've also tried using file association in the control panel, much to the same effect of being brought back to the frustrating metro "Default apps" menu.

 

There's no problem running the program at all as far as I can tell (I pretty much downloaded it just a week ago and fiddled with it off and on), but not being able to make it the system-recognized default is kind of a bummer. I haven't found this issue with anyone else, but then again I've been known to have very specific problems nobody else has, so could it be an install problem, perhaps?

 

Sorry for long post. I have no idea what this forum's etiquette is. Every forum is different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • NetSpeedTray 1.3.2 by Razvan Serea NetSpeedTray is a lightweight, open-source Windows network monitor that shows live upload and download speeds directly on the Taskbar. Designed for efficiency, it quietly sits in the system tray, conserving CPU and battery with dynamic updates. It blends seamlessly with Windows 10/11, adapts to light/dark themes, and auto-positions to avoid overlaps. Features include accurate interface detection, customizable display, optional mini-graph, color coding, granular font and unit control, detailed per-interface history graphs, safe data management, and easy CSV export—bringing the network monitoring Windows forgot. NetSpeedTray key features: Lightweight & Efficient Runs quietly in your system tray without consuming resources. Features a "Dynamic Update Rate" that lowers refresh frequency when the network is idle to save CPU and battery life. Native Look & Feel Blends seamlessly with Windows 10/11 UI. Smart detection for light and dark taskbar themes ensures text is always visible. Intelligent & Adaptive Positioning Automatically finds empty space next to your system tray and shifts to make room for new icons, preventing overlaps. Seamless OS Integration Behaves like a native Windows component. Hides instantly with auto-hiding taskbar Hides when a fullscreen app is active Smart Network Monitoring Accurate by Default: Auto mode identifies your main internet connection and ignores noise from VPNs or virtual adapters. Easy Interface Selection: Switch effortlessly between Auto, All, or Selected network interfaces via intuitive radio buttons. Total Visual Customization Free Move Mode: Unlock and place the widget anywhere on your screen. Optional Mini-Graph: Real-time graph of recent network activity with adjustable opacity. Color Coding: Customize colors and speed thresholds to quickly see network status. Granular Display Control Text & Font: Adjust font family, size, weight, and alignment. Units: Automatic (B/s, KB/s, MB/s) or fixed Mbps display. Precision: Set decimal places and always show them for uniform appearance. Detailed & Intelligent History Graph Smart Scale: Logarithmic scale shows low-level traffic and large spikes clearly. Per-Interface Filtering: View speed history for specific adapters (Wi-Fi, Ethernet, VPN). Safe & Efficient Data Management: Adjustable retention, automatic cleanup, optimized database. Easy Data Export: Export raw data to .csv or save high-quality graphs for reports. NetSpeedTray v1.3.2: Smaller, Lighter, Better Multi-Monitor NetSpeedTray v1.3.2 focuses on being smaller, lighter, and more reliable, with major memory savings, better multi-monitor support, stronger privacy protections, and easier troubleshooting. Changes 24% smaller installer (106 → 81 MB) 28% smaller portable ZIP (127 → 91 MB) 45–70% lower idle RAM usage (~135 MB → ~40–75 MB) Preferred Monitor setting for multi-monitor setups (#72) Export Support Bundle for one-click bug-report packaging Live Windows Light/Dark theme detection (#62) Lazy loading of matplotlib & numpy for faster, lighter startup Improved multi-monitor widget position restore after reboot (#133) Windows 10/11 stylesheet and font compatibility fixes (#149) Support Bundle includes sanitized logs, config, and system info PII obfuscator hardened to cover IPv6, MACs, hostnames, GUIDs, and paths (#141) Unified log redaction across file and console logging Better diagnostic logging included by default in support bundles Korean translation improvements and updated translator credits (#139) Test suite expanded from 146 → 191 passing tests (+45) [full release notes] Download: NetSpeedTray 1.3.2 | 81.6 MB (Open Source) Download: NetSpeedTray Portable | 91.1 MB View: NetSpeedTray Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Reluctantly..bs. In this day and age(pun intended) information is more valuable then apps; big tech worked with the GOP and in dem states like California to add this crap so they can agro better marketing data.
    • >Under 13, 13-15, 16-17, or 18+ Or as the Texas GOP likes to call them... Under 13: Priest-bait 13-15: "Want to meet a prince?" - Epstein and Trump 16-17: "Totally legal!" - Megyn Kelly 18+: Public-facing Breeder Wives
    • An excellent piece of hardware held back by its OS
  • Recent Achievements

    • Apprentice
      fernan99 went up a rank
      Apprentice
    • One Month Later
      nothanks earned a badge
      One Month Later
    • One Month Later
      B2Proxy earned a badge
      One Month Later
    • One Year In
      MadMung0 earned a badge
      One Year In
    • Week One Done
      jefred earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      473
    2. 2
      PsYcHoKiLLa
      232
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      68
    5. 5
      Michael Scrip
      58
  • Tell a friend

    Love Neowin? Tell a friend!