Recommended Posts

6 hours ago, Raphaël G. said:

Could you test if Preview 9 improves this? I silently released preview 9 here.

I tested something as a whim, when my monitor is @60hz it works fine, but when I bump my refresh rate up to 144hz or 165hz it doesn't work.  So @ 60hz it's working great.  Not sure why it would not work at a higher refresh rate...

Spectrum Analyzer bug:
 

I have a duel monitor setup, one is 1080p @ 60hz, the other is 1440p @ 166hz, there is a bug in the NVidia drivers that causes stuttering in windows when two displays are using different refresh rates.  I tested this bug with both monitors @ 60hz and everything works fine.  When I bumped my main monitor up to 165hz is when the stuttering starts in Spectrum Analyzer.  I suspect this issues is being caused by the NVidia driver.  I have only seen this behavior in the edge browser for video playback, the new Chromium browser somehow is not affected by this bug.

Nvidia bug info

@Ravensky Thank's a lot for this information! That might explain why I have problems reproducing it on my computer. I've updated the issue information on the Dopamine GitHub: https://github.com/digimezzo/Dopamine/issues/987

 

It's indeed, not clear why it only happens on now playing.

 

Edit:

 

@Ravensky and @Jackaluichi,

 

Unfortunately I don't have any monitor which has a framerate higher than 60. So can I ask the following?

Could you try out the build that I put on my dropbox: https://www.dropbox.com/sh/fqvqotogo2jv7kr/AAC54ENOFA89y78d30bMihRWa?dl=0

That build is also called "preview 9" and you should be able to install it over your current version. That build removes the image on now playing. I'd like to know if that improves the situation.

 

Thank you!

@RavenskyThanks for all the information, mate.

 

I also have a dual monitor setup, a 24" Dell 60Hz, but it's almost always switched off, and my main one is an UltraWide 2560x1080 144 Hz. My graphics card, however, is a Radeon RX Vega 56, so I don't think this is a problem exclusive to NVIDIA drivers. I have just tested using a refresh rate of 60 Hz, and just like in your case the problem dissappears. But I've also discovered something else. Even while keeping the refrest rate at 144 Hz, if I close Dopamine in the 'Now Playing' section, when I open it again and press play, the problem goes away as well, but it returns as soon as I switch to any other section within Dopamine.

 

Cheers!

5 minutes ago, Raphaël G. said:

@Ravensky and @Jackaluichi,

 

Unfortunately I don't have any monitor which has a framerate higher than 60. So can I ask the following?

Could you try out the build that I put on my dropbox: https://www.dropbox.com/sh/fqvqotogo2jv7kr/AAC54ENOFA89y78d30bMihRWa?dl=0

That build is also called "preview 9" and you should be able to install it over your current version. That build removes the image on now playing. I'd like to know if that improves the situation.

 

Thank you!

I've just tested it, and I'm afraid it doesn't make any difference at all.

23 minutes ago, Jackaluichi said:

I've just tested it, and I'm afraid it doesn't make any difference at all.

Thanks! So I can rule that one out.

 

Your observation about starting on now playing, and then opening another screen is quite interesting. In that case, does the stutter happen on another screen than the now playing screen?

6 minutes ago, Raphaël G. said:

Thanks! So I can rule that one out.

 

Your observation about starting on now playing, and then opening another screen is quite interesting. In that case, does the stutter happen on another screen than the now playing screen?

In that case, when I go back to the general view the stutters happen for a brief moment and then they just go away on their own. This bug seems like one of the most weird ones I've come across in a while.

7 minutes ago, Jackaluichi said:

In that case, when I go back to the general view the stutters happen for a brief moment and then they just go away on their own. This bug seems like one of the most weird ones I've come across in a while.

Very strange indeed. How is the spectrum analyzer on the cover and the micro player?

While Dopamine is running and playing music on the Now Playing screen if I switch from 60hz to 120hz or 144hz or 165hz it will instantly start stuttering, (not the music playback just the analyzer) and when I switch back to 60hz while it is still playing it will correct itself and run fine.  So it is definitely tied to the refresh rate of the monitor.  If Dopamine is on the default playback window there is no affect at any refresh rate it just works fine on all.

Hi everyone!

 

Dopamine 2.0 preview 10 is ready for consumption. This release has a very short, but interesting, change log:

 

– [Fixed] Lyrics “Search again” doesn’t work
– [Fixed] High CPU and memory usage

 

For this preview, I spent quite some time optimizing memory en CPU usage. On my test system, this was a success. Hopefully this preview treats you as well as it did me 🙂

 

Enjoy!

 

As always, you can download it here

  • Like 2
  • Thanks 1

Another preview is available. I've been handling small annoyances that some people reported. Here's the change log:

 

– [Fixed] Short sound after starting up
– [Fixed] Zero-sized images which are embedded in audio files, are mistakenly treated as valid images.

 

Download here

 

 

  • Like 1
  • Thanks 1
2 hours ago, Raphaël G. said:

Another preview is available. I've been handling small annoyances that some people reported. Here's the change log:

 

– [Fixed] Short sound after starting up
– [Fixed] Zero-sized images which are embedded in audio files, are mistakenly treated as valid images.

 

Download here

 

 

Thanks, Raphaël! 😄
How's the spectrum analyzer stutter's investigation going? 🤔

58 minutes ago, Jackaluichi said:

Thanks, Raphaël! 😄
How's the spectrum analyzer stutter's investigation going? 🤔

Not good :( I have no idea how to explain what is going on. Also, the fact that I don't have the tools to reproduce it, doesn't help.

21 hours ago, Raphaël G. said:

Not good :( I have no idea how to explain what is going on. Also, the fact that I don't have the tools to reproduce it, doesn't help.

If I were rich, I would give you a 144 Hz monitor away 😜

1 hour ago, Jackaluichi said:

If I were rich, I would give you a 144 Hz monitor away 😜

Hehe thanks :) But no need. I'll find another way somehow. Maybe some other developer can assist. You aren't a developer by any chance? :)

41 minutes ago, kukata said:

@Raphaël G. Hello! When starting the player a brief moment (2-3 secs) from a song of the last played album is been played. He's been having this problem for a long time. It's not the new build.

Preview 11 is also doing that? I hoped I fixed that in preview 11.

Made this account just to ask, so sorry if that's frowned upon in this forum, but I might stick around because the community seems cool 😀

 

I've downloaded Dopamine to replace VLC and from what little time I've used it it seems awesome already, but when I try to make Dopamine the default audio player in the "Default apps" menu as well as in the control panel, it doesn't show up on the list of programs able to be selected. Additionally, searching for Dopamine in the search bar only brings up the playlist folder it creates in "C:\Users\[NAME]\Music", but not the application file itself or its own folder I installed it to.

 

I've also tried using file association in the control panel, much to the same effect of being brought back to the frustrating metro "Default apps" menu.

 

There's no problem running the program at all as far as I can tell (I pretty much downloaded it just a week ago and fiddled with it off and on), but not being able to make it the system-recognized default is kind of a bummer. I haven't found this issue with anyone else, but then again I've been known to have very specific problems nobody else has, so could it be an install problem, perhaps?

 

Sorry for long post. I have no idea what this forum's etiquette is. Every forum is different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Google are hyprocrites for signing this. They have been pulling the same dirty tactics as Microsoft, only they do it on Android and ChromeOS.
    • In some countries the law has forced Microsoft to display a menu on a fresh install of Windows which asks which web browser you want and it will install that browser. This doesn't add any bloat to Windows. It simply an additional step when setting up a new PC.
    • Chrome is also a first party browser on Android and ChromeOS. And on those systems, Google is pulling the same dirty tactics as Microsoft does on Windows.
    • Unofficial script lets you install unreleased Windows 11 features without Microsoft Account by Sayan Sen Microsoft has been steadily evolving the Windows Insider Program over the years, introducing new channels and testing paths that allow enthusiasts to experience upcoming and yet-to-be-released Windows features (some interesting hidden ones too) before they reach the public. However, one long-standing requirement has remained largely unchanged as users are generally expected to enroll in the Program and with a Microsoft account. That's where a third-party tool called "OfflineInsiderEnroll" can help. OfflineInsiderEnroll is said to be a lightweight script that enables access to Windows Insider Program builds on systems that are not signed in with a Microsoft account. Essentially the tool configures the necessary Insider settings locally and hence allows users to select and switch between available preview channels while continuing to receive builds through the normal Windows Update channel. If you are wondering how it manages to do so, it is made possible by a Registry value known as TestFlags. When configured to"0x20", Windows stops communicating with Microsoft's online Insider enrollment services thus preventing locally configured Insider settings from being overwritten. This allows the script to apply its own channel configuration directly through the Registry as Windows Update does not verify whether a device has been officially enrolled in the Insider Program or not. Previously the utility has had already supported the traditional Insider branches including Dev, Beta, and Release Preview. However following Microsoft’s recent restructuring of its preview channels, the script has now been updated. The latest OfflineInsiderEnroll version, 2.6.6, adds support for the newly introduced Insider channel lineup. As such, users can now choose from several Experimental channels in addition to Beta and Release Preview options. The update also retains tools for refreshing the Insider cache, resetting Insider settings, and completely stopping Insider enrollment when needed. Keep in mind though that will need elevated privileges when running the script (run as Admin). You can get the latest version of OfflineInsiderEnroll from this page on its official GitHub repo.
  • Recent Achievements

    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
    • Very Popular
      s0nic69 earned a badge
      Very Popular
    • Collaborator
      Asgardi earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      472
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Skyfrog
      79
    4. 4
      FloatingFatMan
      67
    5. 5
      Michael Scrip
      60
  • Tell a friend

    Love Neowin? Tell a friend!