Recommended Posts

6 hours ago, Raphaël G. said:

Could you test if Preview 9 improves this? I silently released preview 9 here.

I tested something as a whim, when my monitor is @60hz it works fine, but when I bump my refresh rate up to 144hz or 165hz it doesn't work.  So @ 60hz it's working great.  Not sure why it would not work at a higher refresh rate...

Spectrum Analyzer bug:
 

I have a duel monitor setup, one is 1080p @ 60hz, the other is 1440p @ 166hz, there is a bug in the NVidia drivers that causes stuttering in windows when two displays are using different refresh rates.  I tested this bug with both monitors @ 60hz and everything works fine.  When I bumped my main monitor up to 165hz is when the stuttering starts in Spectrum Analyzer.  I suspect this issues is being caused by the NVidia driver.  I have only seen this behavior in the edge browser for video playback, the new Chromium browser somehow is not affected by this bug.

Nvidia bug info

@Ravensky Thank's a lot for this information! That might explain why I have problems reproducing it on my computer. I've updated the issue information on the Dopamine GitHub: https://github.com/digimezzo/Dopamine/issues/987

 

It's indeed, not clear why it only happens on now playing.

 

Edit:

 

@Ravensky and @Jackaluichi,

 

Unfortunately I don't have any monitor which has a framerate higher than 60. So can I ask the following?

Could you try out the build that I put on my dropbox: https://www.dropbox.com/sh/fqvqotogo2jv7kr/AAC54ENOFA89y78d30bMihRWa?dl=0

That build is also called "preview 9" and you should be able to install it over your current version. That build removes the image on now playing. I'd like to know if that improves the situation.

 

Thank you!

@RavenskyThanks for all the information, mate.

 

I also have a dual monitor setup, a 24" Dell 60Hz, but it's almost always switched off, and my main one is an UltraWide 2560x1080 144 Hz. My graphics card, however, is a Radeon RX Vega 56, so I don't think this is a problem exclusive to NVIDIA drivers. I have just tested using a refresh rate of 60 Hz, and just like in your case the problem dissappears. But I've also discovered something else. Even while keeping the refrest rate at 144 Hz, if I close Dopamine in the 'Now Playing' section, when I open it again and press play, the problem goes away as well, but it returns as soon as I switch to any other section within Dopamine.

 

Cheers!

5 minutes ago, Raphaël G. said:

@Ravensky and @Jackaluichi,

 

Unfortunately I don't have any monitor which has a framerate higher than 60. So can I ask the following?

Could you try out the build that I put on my dropbox: https://www.dropbox.com/sh/fqvqotogo2jv7kr/AAC54ENOFA89y78d30bMihRWa?dl=0

That build is also called "preview 9" and you should be able to install it over your current version. That build removes the image on now playing. I'd like to know if that improves the situation.

 

Thank you!

I've just tested it, and I'm afraid it doesn't make any difference at all.

23 minutes ago, Jackaluichi said:

I've just tested it, and I'm afraid it doesn't make any difference at all.

Thanks! So I can rule that one out.

 

Your observation about starting on now playing, and then opening another screen is quite interesting. In that case, does the stutter happen on another screen than the now playing screen?

6 minutes ago, Raphaël G. said:

Thanks! So I can rule that one out.

 

Your observation about starting on now playing, and then opening another screen is quite interesting. In that case, does the stutter happen on another screen than the now playing screen?

In that case, when I go back to the general view the stutters happen for a brief moment and then they just go away on their own. This bug seems like one of the most weird ones I've come across in a while.

7 minutes ago, Jackaluichi said:

In that case, when I go back to the general view the stutters happen for a brief moment and then they just go away on their own. This bug seems like one of the most weird ones I've come across in a while.

Very strange indeed. How is the spectrum analyzer on the cover and the micro player?

While Dopamine is running and playing music on the Now Playing screen if I switch from 60hz to 120hz or 144hz or 165hz it will instantly start stuttering, (not the music playback just the analyzer) and when I switch back to 60hz while it is still playing it will correct itself and run fine.  So it is definitely tied to the refresh rate of the monitor.  If Dopamine is on the default playback window there is no affect at any refresh rate it just works fine on all.

Hi everyone!

 

Dopamine 2.0 preview 10 is ready for consumption. This release has a very short, but interesting, change log:

 

– [Fixed] Lyrics “Search again” doesn’t work
– [Fixed] High CPU and memory usage

 

For this preview, I spent quite some time optimizing memory en CPU usage. On my test system, this was a success. Hopefully this preview treats you as well as it did me 🙂

 

Enjoy!

 

As always, you can download it here

  • Like 2
  • Thanks 1

Another preview is available. I've been handling small annoyances that some people reported. Here's the change log:

 

– [Fixed] Short sound after starting up
– [Fixed] Zero-sized images which are embedded in audio files, are mistakenly treated as valid images.

 

Download here

 

 

  • Like 1
  • Thanks 1
2 hours ago, Raphaël G. said:

Another preview is available. I've been handling small annoyances that some people reported. Here's the change log:

 

– [Fixed] Short sound after starting up
– [Fixed] Zero-sized images which are embedded in audio files, are mistakenly treated as valid images.

 

Download here

 

 

Thanks, Raphaël! 😄
How's the spectrum analyzer stutter's investigation going? 🤔

58 minutes ago, Jackaluichi said:

Thanks, Raphaël! 😄
How's the spectrum analyzer stutter's investigation going? 🤔

Not good :( I have no idea how to explain what is going on. Also, the fact that I don't have the tools to reproduce it, doesn't help.

21 hours ago, Raphaël G. said:

Not good :( I have no idea how to explain what is going on. Also, the fact that I don't have the tools to reproduce it, doesn't help.

If I were rich, I would give you a 144 Hz monitor away 😜

1 hour ago, Jackaluichi said:

If I were rich, I would give you a 144 Hz monitor away 😜

Hehe thanks :) But no need. I'll find another way somehow. Maybe some other developer can assist. You aren't a developer by any chance? :)

41 minutes ago, kukata said:

@Raphaël G. Hello! When starting the player a brief moment (2-3 secs) from a song of the last played album is been played. He's been having this problem for a long time. It's not the new build.

Preview 11 is also doing that? I hoped I fixed that in preview 11.

Made this account just to ask, so sorry if that's frowned upon in this forum, but I might stick around because the community seems cool 😀

 

I've downloaded Dopamine to replace VLC and from what little time I've used it it seems awesome already, but when I try to make Dopamine the default audio player in the "Default apps" menu as well as in the control panel, it doesn't show up on the list of programs able to be selected. Additionally, searching for Dopamine in the search bar only brings up the playlist folder it creates in "C:\Users\[NAME]\Music", but not the application file itself or its own folder I installed it to.

 

I've also tried using file association in the control panel, much to the same effect of being brought back to the frustrating metro "Default apps" menu.

 

There's no problem running the program at all as far as I can tell (I pretty much downloaded it just a week ago and fiddled with it off and on), but not being able to make it the system-recognized default is kind of a bummer. I haven't found this issue with anyone else, but then again I've been known to have very specific problems nobody else has, so could it be an install problem, perhaps?

 

Sorry for long post. I have no idea what this forum's etiquette is. Every forum is different.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • Qmmp 2.3.3 by Razvan Serea Qmmp (Qt-based MultiMedia Player) is a free, open-source audio player that delivers a classic music listening experience with a modern foundation. Inspired by the legendary Winamp, Qmmp features a familiar, customizable interface that supports both Winamp and XMMS skins, making it instantly recognizable to long-time users. It handles a wide variety of audio formats including MP3, OGG Vorbis, FLAC, WAV, AAC, and many others, ensuring smooth playback across diverse music libraries. In addition to basic playback, Qmmp offers advanced features such as a 10-band equalizer, crossfading, gapless playback, and audio visualization plugins. Users can manage playlists efficiently, create and save multiple lists, and even enable streaming from online sources. Plugin support extends the player’s capabilities, allowing integration of features like lyrics display, ReplayGain, and more. Built with the Qt framework, Qmmp runs smoothly and efficiently, making it ideal even for older systems. 10 great QMMP features you might not know: Global Hotkeys Support – Control playback using customizable system-wide keyboard shortcuts. CUE Sheet Support – Automatically detects and plays tracks from CUE files for full album playback. Last.fm Scrobbling – Integrated support for sending playback data to Last.fm. Audio CD Playback – Play music directly from audio CDs. Command Line Interface – Control Qmmp via command-line options for scripting or automation. System Tray Integration – Minimize to and control playback from the system tray. MPRIS Support – Integration with desktop media player controls via the MPRIS (Media Player Remote Interfacing Specification) interface. Spectrum Analyzer and Oscilloscope – Built-in visualizations for real-time audio feedback. Configurable Notifications – Custom pop-ups for track changes and playback status. Multiple Output Backends – Support for ALSA, PulseAudio, JACK, and more, offering flexible audio routing. Qmmp 2.3.3 changelog: fixed build with PipeWire versions less than 0.3.50; fixed settings dialog layout; fixed default CUE encoding; fixed possible null pointer dereference; fixed tracks order when added using drag and drop (2.3.3 only); fixed uninitialized structure usage; improved sid plugin: added libsidplayfp 3.0 support; added feature to build without residfp engine; fixed memory leak; fixed displaying audio information; updated Japanese translation (2.3.3 only). Download: Qmmp 64-bit | 24.0 MB (Open Source) Download: Qmmp 32-bit | 24.1 MB View: Qmmp Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • BATorrent 3.0.3 is out.
    • The current Statcoungter desktop numbers has Google Chrome increasing it's market share this past year and currently commanding 75% share. Everybody else is just making up the numbers with even MS Edge losing 3% this past year and has dipped just below 10% share which is staggering considering it's default on every Windows deviced purchased. If these numbers are correct that terrible Edge number is both devastating and embarrassing for MS especially when you add in the terribly low Bing market share. This leads me to ask a couple of questions as the default browser holding just less than 10% market share seems really weird. It used to be that all Chromium browsers were being counted as Google Chrome in some cases.  Is this still happening? Do these high Google Chrome numbers contains some Edge user numbers?
    • Yeah, all web browsers seem to have some junk in them these days. The regular Brave browser has a lot of unnecessary stuff in it, similar to Microsoft Edge, so I don't see any benefits of using Brave over Microsoft Edge if you already have Microsoft Edge fully set up with adblockers and that. The cleanest or best free browser outside of 'Microsoft Edge' I’ve tried so far is 'Opera Air'. It still has some bloat, but nowhere near as much as Brave browser, for example. I also really like the web browser called 'Floorp' that is based on Firefox. I have a system wide Adblocking program for Windows 11 that doesn't just blocks ads in the the web browser, but over the whole thing. I don't really need a web browser with an inbuilt adblocker because of that.
  • Recent Achievements

    • Rookie
      moog19 went up a rank
      Rookie
    • Mentor
      grik went up a rank
      Mentor
    • Dedicated
      JKR earned a badge
      Dedicated
    • One Year In
      CHUNWEI earned a badge
      One Year In
    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
  • Popular Contributors

    1. 1
      +primortal
      491
    2. 2
      PsYcHoKiLLa
      270
    3. 3
      Skyfrog
      75
    4. 4
      Steven P.
      68
    5. 5
      FloatingFatMan
      63
  • Tell a friend

    Love Neowin? Tell a friend!