Recommended Posts

Is anyone else having a problem with this and Winamp 5.1?  For me, Winamp will close almost immediately after opening.

586478483[/snapback]

You need to replace gen_ml.dll with axialix's modified one and all will be well. Doesn't anyone read instructions anymore? :no:

For those of you having problems with Winamp 5.1 and this skin, please try the version attached (rename to clearONEbeta.wal if desired). I finally got mine to work, hopefully this one will work for you too.

BTW, I'm working on another gen_ml.dll for Winamp 5.1 (the new one for 5.1 is a bit larger). You can still use the one on my site for 5.09, but it's NOT required. All it does is change the font and size of the ML buttons, that's all. If you're happy with the standard MS Serif font, then there's no need to use mine.

clearONEbeta.zip

:D Thanks Sky, you're right. This skin really needs to be finished.

Also, I don't want this thing breaking with every new version of Winamp. And since there seems to be a lot of confusion over my versions of the gen_ml anyway, I might just remove them all from my site. However... I have updated my site with the new gen_ml.dll for 5.1. I was wrong about the 5.09 dll working with Winamp 5.1, it crashes it immediately. Sorry about that.

I don't get it...I updated to 5.1 from 5.094 with clearONE already installed, and Winamp crashed a few seconds after starting it. I replaced the updated gen_ml.dll with your 5.09 replacement .dll, and it worked fine. The same thing happened to a few other people when updating to 5.1 as well. I installed the modified skin files you put up earlier reverting back to the updated .dll, and it also works. You're saying it's the other way around? :wacko: Either way, it's working. Thanks for your hard work on this.

Whilst this is an amazing skin, is it just me that has trouble docking the player at the top and setting to autohide? If i do that, the window just disappears completely. I know its still there as I can right click and get the menus, but there are no graphics being shown. I then have to shut winamp, change to default skin and then put back to Clearone :blink:

I'm having a problem with the font settings... I installed the font file, but in some areas of the skin, ex. playlist and media library, it shows up in the default winamp font. I don't know what I can do to change it..

This is such a great theme, just wish I could get this font problem sorted out :unsure:

post-59643-1125944133.jpg

You need to replace gen_ml.dll with axialix's modified one and all will be well. Doesn't anyone read instructions anymore?  :no:

586478747[/snapback]

Just to let you know, I have been using the skin for months, and am well aware of the installation procedure. Thanks axialix for updating this to address the issue.

Abandoned, press F5 when the skin disappears, that should bring it right back.  This is a bug with Winamp itself, it happens with all skins.

Frappe, see the screenshot to change the PL and ML fonts to NonstepNew.

586483556[/snapback]

Worked a charm, thanks for that, never noticed it before but not used winamp in a while :jump:

  • 3 weeks later...

Yes, there will be a final release. I'm working on it right now, but it's rather slow because of my busy schedule. I've already added a few items (main window freeze, notifier stay on top option, etc.) and given it a totally new look, but there's still a lot left to do.

I do want to thank everyone for the continued interest. You won't be disappointed. :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • If you can't spell a simple word that 2nd graders learn, your entire argument is suspect.
    • And here goes the "Won't someone think of the children" brigade. Get stuffed mate. This has NOTHING to do with making the internet safe. It's about tracking adults, spying on your online activity, and sending the boys around when they don't like something you post. Also, again, parliament have voted TWICE against this, and Starmer is going ahead anyway. THAT is anti-democratic bullsh**. They will use this law to track you, they will use this law to control you, and they will use this law to punish you if they don't like what you do, even if it's legal. And your data? Say bye bye to that. It'll be on the darkweb in weeks. I'm not some rando online. I've been an IT professional for 40 years, many of it in security. I know exactly what this means and what will happen to your data. I do not consent and I will not comply.
    • "...but it may not be Microsoft's fault" seems like a reasonable way to tease what is going on without leaving the user with a false impression that an update is the problem. A title isn't a summery, it is meant to entice the user to read the article. It should not contain a misleading premise; which this title does not. You could maybe complain that the first paragraph should have included that detail. The writing style popularized over 100 years ago in newspapers will cover the most important information as soon as possible with details and nuance added later; the idea being that with each new paragraph you have less of the reader's focus.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      520
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!