Recommended Posts

...what i dont understand is..if ur ip is blocked why would you return..if you are not wanted, have the manners to just leave. Apart from blocking your ip they can restrict your posts and profile making it impossible for you to post garbage. Therefore requiring you to open a new account which is defeating the purpose of an online community where people get to know each other from their rep on the board...

The simple point is Neowin cannot in their best interest be seen to promote ad blocking. If privatly you do fine..but please dont promote it or its uses as it is not in the interests of the communitys survival.

If you have a problem with this leave.. join another forum. :angry:

...what i dont understand is..if ur ip is blocked why would you return..if you are not wanted, have the manners to just leave. Apart from blocking your ip they can restrict your posts and profile making it impossible for you to post garbage. Therefore requiring you to open a new account which is defeating the purpose of an online community where people get to know each other from their rep on the board...

The simple point is Neowin cannot in their best interest be seen to promote ad blocking. If privatly you do fine..but please dont promote it or its uses as it is not in the interests of the communitys survival.

If you have a problem with this leave.. join another forum. :angry:

My point is that Neowin administrators can do nothing to completely block a person from visiting their site without shutting down altogether. Therefore, it is in their best interest to find common ground with those they view as doing them harm. Taking the "don't do this or else I'll do something bad to you" approach is counterproductive in this case despite the best of intentions. Great at covering things up, but does nothing to solve the problem.

Why would someone return where they're "not wanted?" You'll have to ask them.

My point is that Neowin administrators can do nothing to completely block a person from visiting their site without shutting down altogether. Therefore, it is in their best interest to find common ground with those they view as doing them harm. Taking the "don't do this or else I'll do something bad to you" approach is counterproductive in this case despite the best of intentions. Great at covering things up, but does nothing to solve the problem.

Why would someone return where they're "not wanted?" You'll have to ask them.

Ok, besides the fact that unauthorised access to a computer system is illegal in most countries, it's common courtesy to just leave when the administrators tell you to leave.

And anyways, how hard is it just not to talk about adblocking? They're not saying "You can't have it installed when you vist this site", they're just saying "don't talk about using it here"

Ok, besides the fact that unauthorised access to a computer system is illegal in most countries, it's common courtesy to just leave when the administrators tell you to leave.

And anyways, how hard is it just not to talk about adblocking? They're not saying "You can't have it installed when you vist this site", they're just saying "don't talk about using it here"

Sorry, but "unauthorized access" would not fall within the scope of this discussion. The only possible way that argument could withstand scrutiny is if Neowin required login before accessing all of its content. Since this site has public access and IP addresses are not uniquely assigned to individuals, your argument does not stand (analogy: A vehicle with a particular VIN number is banned from parking in my lot because the person who drove that vehicle is bad). I won't even discuss common courtesy because that's a philosophical discussion.

Now, the reason I brought that up in the first place was to demonstrate that it is an exercise in futility to block someone's IP from accessing a site, thus it becomes an idle argument. My entire purpose of the post was to point out the fact that there are better restriction methods than idly threatening your audience ad hoc or acting with such hostility towards them.

Let's get something straight here. I'm not an adblocking discussion advocate. I care about as much as if Neowin restricted the discussion of poodles with three legs and one ear that barks like a canary sqawks. But, if certain Neowin admins were to threaten people in a similar manner as they've done here when they made the decision to restrict it, you can bet your bottom dollar I'd be just as upset. Why don't I just leave? Because I care.

Let's get something straight here. I'm not an adblocking discussion advocate. I care about as much as if Neowin restricted the discussion of poodles with three legs and one ear that barks like a canary sqawks. But, if certain Neowin admins were to threaten people in a similar manner as they've done here when they made the decision to restrict it, you can bet your bottom dollar I'd be just as upset. Why don't I just leave? Because I care.

This was my whole point that seemed to miss..

I don't even block the ads here, yet I use methods to block ads. In fact I stated that several times. I support this site.

I wasn't arguing against the fact they have ads or want to protect their revenue, I was arguing the fact they were censoring users based on a rediculous foundation. Then I get threatened with an ip ban. Which was even more rediculous!!

Next thing you know, the word snark will result in a warning level on users, just because the word snark offends an admins sensitive nature..

I tried to fight it, but I just can't any longer.

<rant>

Why don't you go ahead and block my IP, as well. Don't forget that ISPs use DHCP, so I can request a new address any time I want (I can pull a few strings and change between four or five /24 subnets), so you'll want to be sure you block my ISP's subnet (not sure the mask, so feel to whois-me or guess). Make sure you get my workplace's /19 subnet as well as our secondary /19 subnet we no longer use but still have rights to. Better make sure you block our ISP's because I can piggy back on others they host via other dedicated links. While you're at it, block all open proxies and my parent's / friends' ISP subnets too because I'll just proxy my connection through them for access to Neowin.

</rant>

.. or you can use something called a proxy. Get outside more man, you're making yourself look like a incoherent idiot.

Why is everyone going on and on about this nonsense still? Don't block ads here, it's as easy as that. If you can't follow one simple rule, than you shouldn't even be allowed access to the damn internet.

.. or you can use something called a proxy.

Uh... ya.... like I said in the text you quoted.

Why is everyone going on and on about this nonsense still? Don't block ads here, it's as easy as that. If you can't follow one simple rule, than you shouldn't even be allowed access to the damn internet.

Who's going "on and on" about blocking ads? Not me. Jeebus, man, I'm tired of saying it -- read for Christ's sake, won't you?

Get outside more man, you're making yourself look like a incoherent idiot.

Given your intelligent post, I'll consider that a compliment. Thank you. :)

Edited by g33kb0y
  • 4 weeks later...

Look guys,

Neowin doesn't charge anyone to read news or to be a member here. All the staff volunteer their time and effort here so that you can all enjoy quality tech news and forums. All we ask if for you to not block the advertisements. This is to ensure that we can make up for some of the money spent to run the site. Unfortunately, nothing in life is free, and this is the best way that Neowin can cover some of their costs.

Thanks

I can't believe this has gone on this long.

Neobond posted a while back that you can block whatever you want. Just don't discuss it or how to do it. How damned hard is that? I've 'spoken up' about things that are or aren't allowed on here. I've openly flamed a mod or two and been flamed back. But you don't bite the hand that feeds you.

The bottom line is that even allowing the discussion of blocking ads can, will, and does hurt this site. I happen to like it here and I would hate to see it disappear or totally become a pay-to-play site.

  • 2 weeks later...

Neowin ads are fine on the whole, but personally I find the intellitxt ads (the one's that highlight random words and expand when your mouse hovers over them) very very annoying, to the point where their presence is actually ruining my Neowin experience. (N)

Cant we do something about them? The only thing I can think of doing is blocking them, yet making up for it by actively clicking on the banner ads so that Neowin can get the same revenue that they'd usually get from my visits here?

Thoughts? (Btw, before i'm attacked, i'd like to point out I havent blocked any ads, i'm just looking for a discussion about the intellitxt ads)

John :)

May have been exit popups from the site you were on previously.

Nope, i was in an internet cafe, and it was the first site i logged into. I normally never see the fromt page as on my pc / laptop i use a direct link form my desktop to the forums....

Meah...prob was somthin to do with the internet cafe . . .

  • 2 weeks later...

Um... I don't see the problem here...

The way I read it, you can block all the ads on the site. You just can't tell other people, people who may or may not actually click the ads, how to block them...

This should really be a non-issue. If YOU block the ads, it's YOUR choice. If you help OTHER people block the ads, then it is Neobond's problem because you could potentially to taking away support to run the website.

All these people saying how wrong it is for the webmaster to tell you not to block ads need to re-read his post. He's not telling you, you can't block the ads. He's telling you not to tell other people how to block the ads.

You've gotta be retarded as hell to click an ad if you ask me. Then again, there are many retarded people out their (not talking about mentally challenged people of course, but people who are just generally stupid). My bad for all the gloat in the past. I usually advise people to do smart things and make better choices, but ya know.

You guys should set up a "No-Ads" feature with your Paid Subscription. I'd be very willing to subscribe to the website for it. I mean, who wants a 10MB mailbox? Just a thought.-- :yes:

I actually DO purposly click the ads on Neowin. The ads here are unintrusive, and although i DO block ads from other sites, ive added Neowin to my allow list.

If you're posting here, you're costing Neowin money, and there has to be a way to recoup their money. I know its harsh, but a site i worked on has a script run which went along the lines of:

If the ads arent shown, stop the site loading.

Would you like it if neowin had to do that because of people constantly telling others to block ads?

I actually DO purposly click the ads on Neowin. The ads here are unintrusive, and although i DO block ads from other sites, ive added Neowin to my allow list.

If you're posting here, you're costing Neowin money, and there has to be a way to recoup their money. I know its harsh, but a site i worked on has a script run which went along the lines of:

If the ads arent shown, stop the site loading.

Would you like it if neowin had to do that because of people constantly telling others to block ads?

Yeah, but if you simply OFFER money in return for no ads, isn't it a win-win situation? You pay them, they take off the ads. Many sites do this and it works great. Many people who love their favorite sites wouldn't mind sending in some money, however, many don't want to send in money for nothing. I mean, I'd rather donate to a good cause rather than a website. Though, if you simply offer something as simple as taking down ads for those who choose to send you money, where is it actually hurting the website? $20-30 a year. I'd gladly pay that to rid myself of the ads (including the image button and frame that says "Advertisement"). And I'd feel good as I'd be helping out these guys with their website.

Like I said, it's a win-win type of thing. I thought Neowin had it already, but I guess I was mistaking it for another website. It's too bad though, because it'd be a great thing if you ask me.

Hell, for $20 a year, if even only 100 people decided to purchase the subscription, that's $2000. :o!!

(Y) (Y)

Nope, i was in an internet cafe, and it was the first site i logged into. I normally never see the fromt page as on my pc / laptop i use a direct link form my desktop to the forums....

Meah...prob was somthin to do with the internet cafe . . .

I personally don't sign onto my accounts at public computers. At least, I try not to. Who knows what's lurking there? And unless I can download and scan, I'll never find out.

I never see ads. I don't see ads on any site I go to. :D

Ads are the devil.

If people didn't make so many annoying ads other people wouldn't want to block them. Unfortunately it's the people that make annoying flash ads and ads where stuff flies in front of something you need to read that have ruined it for everyone. It's because of those kinds of ads that I refused to have ads anymore.

As long as people are able to make ads, people will block them.

Geeks started the Internet. Big business put ads on the Internet. Geeks blocked the ads. Big business gets mad. Geeks laugh. That's how it will always be. ;)

Lastly, most of the people here have really annoying signature pictures. Whatever happened to the sigs that were just text (like mine)? Oh yeah, I also don't see most of the "annoying" signatures either. :)

But............remember.........I'm not telling anyone else how to do it. :D

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wow, Microsoft IS cooking lately... This only shows that they COULD improve, they just chose not to for whatever reasons. That obsession with AI was destroying them from the inside out.
    • BATorrent 4.1.0 by Razvan Serea BATorrent is a lightweight, open-source BitTorrent client built with modern C++ and Qt 6, offering a clean, fast, and privacy-focused alternative to traditional torrent apps. It supports magnet links, .torrent files, resume data, sequential downloading, per-file priorities, and even imports from qBittorrent. Power users benefit from integrated RSS auto-download with regex filtering, duplicate detection, and automatic tracker lists from Stremio. Streaming is seamless thanks to auto-detected players like VLC and IINA. BATorrent includes robust VPN tools—interface binding, auto-detection for WireGuard-based services like Mullvad and NordLynx, kill switch, proxy support, and IP filtering. A full WebUI enables remote control, while integrations with Plex, Jellyfin, and Emby automate library updates. With themes, speed scheduling, system-tray alerts, and cross-platform support for Windows, Linux, and macOS, BATorrent delivers a polished, high-performance torrenting experience. BATorrent features: Core .torrent file and magnet link support Resume data — picks up where you left off after restart Import torrents from qBittorrent Create .torrent files from any file or folder Sequential download mode Per-file priority control (skip, low, normal, high) Seed ratio limits with auto-pause DHT, PEX, UPnP, NAT-PMP RSS Auto-Download Subscribe to RSS feeds — automatically download new torrents as they appear Regex filters — match only what you want (e.g. 1080p|720p, S01E\d+) Per-feed settings — custom save path, check interval (5–1440 min), enable/disable Auto-download — matched items are downloaded automatically in the background Supports magnet links, .torrent URLs, and tags Tray notifications when items are auto-downloaded Duplicate detection — never downloads the same item twice Stremio Stremio Addon System pre-installed — works out of the box Auto tracker list from ngosang/trackerslist Streaming Play while downloading — stream video files before the download is complete Supports mp4, mkv, avi, mov, wmv, flv, webm, m4v, ts Auto-detects installed players (VLC, IINA, system default) VPN & Privacy Interface binding — lock torrent traffic to a specific network interface (e.g. tun0) Auto VPN detection — identifies VPN interfaces (tun, tap, WireGuard, Mullvad, NordLynx, ProtonVPN) Kill switch — automatically pauses all torrents if the VPN interface drops Auto-resume — resumes only the torrents paused by the kill switch when VPN reconnects Proxy support — SOCKS5 and HTTP proxy with optional authentication IP filtering — load P2P blocklists to block unwanted IP ranges Protocol encryption (enabled / forced / disabled) WebUI Remote management — control torrents from any browser at http://localhost:8080 REST API with JSON responses Add torrents via magnet link or .torrent upload Pause, resume, remove torrents remotely View peers and files per torrent Dark theme matching the desktop app HTTP Basic Auth with SHA-256 password hashing Configurable port and remote access (localhost vs 0.0.0.0) Interface 3 themes: Dark, Light, Midnight (bat/vampire aesthetic) Real-time speed graph Detailed panel with tabs: General, Peers, Files, Trackers Filter bar: search by name, filter by state (Active, Downloading, Seeding, Paused, Finished) Drag & drop .torrent files and magnet links Drag & drop reorder in torrent list System tray with notifications (download complete, kill switch events, RSS auto-downloads) Splash screen with bat animation Bilingual: English and Portuguese (BR), auto-detected from system locale Bandwidth Scheduler Alternative speed limits — set different download/upload limits on a schedule Time range — configure active hours (e.g. 01:00 to 07:00), supports overnight ranges Per-day control — choose which days of the week the schedule applies Automatically switches between normal and alternative speeds Media Server Integration Plex — automatically trigger library scan when a download completes Jellyfin / Emby — same automatic library refresh via API Configure server URL and authentication token/key in Settings System Cross-platform: Windows, Linux, macOS Auto-shutdown — automatically shut down PC when all downloads complete (60s cancellable countdown) Auto-update system (AppImage on Linux, installer on Windows, DMG on macOS) CLI arguments: pass .torrent files or magnet: URIs directly Keyboard shortcuts: Space to toggle pause, Ctrl+A to select all, Ctrl+O to open BATorrent 4.1.0 release notes: A community-driven release: everything here came straight from your reports and requests. It closes the remaining gaps with qBittorrent and fixes the Windows settings/tray/splash issues several of you hit. Fixed Settings now actually save. A whole class of preferences — speed limits (and the alternative limits), max active downloads, seed ratio, listen port, max connections, DHT/uTP/encryption, VPN interface, kill switch and proxy — weren't being persisted and reset to defaults on every launch. They now round-trip correctly. (Thanks to everyone who reported "the upload limit always goes back to 0".) Splash and tray toggles stick on Windows. Turning off the startup animation (or "close to tray") no longer reverts — the Windows registry stored these booleans as integers and the UI was misreading them. Close-to-tray hint. The first time the window hides to the tray you get a one-time notification, so the app doesn't look like it vanished (Windows 11 tucks new tray icons into the overflow). macOS Dock icon size. The icon filled its canvas edge-to-edge and rendered larger than neighbouring apps; it now uses the standard safe-area padding. Native file picker language. The "Torrent file / All files" filter in the open dialog follows the app language instead of being hard-coded. Added — qBittorrent parity Alternative speed limits toggle — a turtle button in the toolbar flips your throttled limits on/off instantly, independent of the scheduler. Follow system theme — switch light/dark automatically with the OS (Settings → Appearance). Pre-allocate disk space — reserve the full file size up front to reduce fragmentation (Settings → Downloads). Recheck data on add — optionally force a hash check when adding a torrent, so existing or partial files on disk are detected. Port status indicator — a 🔴 dot in the status bar shows whether your listen port looks reachable (UPnP/NAT-PMP + listen state; fully local, no external check). Add torrent from URL — File → Add torrent from URL (Ctrl+U) fetches a remote .torrent and routes it through the normal add dialog. Export .torrent — right-click a torrent → Export .torrent to save its metadata file. Already there (in case you missed it) Watch folder — auto-add .torrent files dropped into a monitored directory (Settings → Files). This release just surfaces it. Incomplete files already carry a .!bt suffix until they finish. Under the hood Regression tests for the settings-persistence and Windows boolean bugs. A new Qt Quick Test harness covering the startup splash and the design-system widgets. Download: BATorrent 4.1.0 | 37.5 MB (Open Source) Download: BATorrent Portable | 51.7 MB Links: BATorrent Website | Screenshot | Changelog Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Disabling open on hover, great! That was so stupid! They need to do a fix, where if a network share is disconnected, it doesn't hang when opening "This PC" for 20 seconds.
    • Microsoft releases major feature updates for stock Windows 11 apps by Taras Buria In addition to releasing new Windows 11 preview builds, Microsoft announced that inbox Windows apps now have dedicated release notes in the official documentation. At long last, users have access to all the release notes for each app, with changes listed in chronological order. Microsoft used to announce feature updates for stock apps with each build. Now, with Windows Insider release notes hosted on the Microsoft Learn website, each app has a dedicated space for its changelog, which is very useful for those who want to track new features and improvements. Alongside that, Microsoft dropped massive feature updates for six stock apps: Clock, Media Player, Calculator, Voice Recorder, Photos, and Paint. Each app packs quite a lot of changes and new capabilities, so here are the release notes. Here are quick notes so that you can jump to the app you are interested in the most: Calculator Camera Clock Media Player Paint Photos Sound Recorder Here is what is new for the Calculator in version 11.2605.9.0: More accurate square-root results — Fixed rare cases where a calculation that should equal zero (like sqrt(2.25) - 1.5) returned a tiny leftover value instead. Readable text in High Contrast themes — Settings text now shows the correct colors in the High Contrast Aquatic and Desert themes. Fixed layout for right-to-left languages — For languages like Arabic and Hebrew, the graph, number pad, equation fields, and scroll buttons now appear correctly oriented. Reliable launch after upgrading — Fixed an issue where upgrading from much older versions could leave outdated settings that stopped the app from opening. Here is what is new for the Camera app (version 2026.2605.7.0): Zoom slider works on more cameras — The zoom slider now works on the latest cameras, respects your system zoom settings, and updates instantly when you change those settings. Full range of zoom levels — Fixed an issue where the zoom slider only showed three steps on some devices that zoom in finer increments. Front camera works on more devices — Resolved a problem that blocked the front-facing camera on certain wide-angle devices. More video resolution choices — You can now pick video resolutions that were previously hidden; the app shows a heads-up warning instead of removing them. QR links you can still use — When a scanned QR code points to something with no matching app, the link is now copied to your clipboard (with a notification) while still offering a Store search. Smarter default settings — When you haven't set a preference, the app now follows your system settings by default. The Clock app has a massive changelog with the following improvements in version 11.2605.9.0: Timers keep counting after they hit zero — When a timer runs out, it now keeps counting up (for example, -00:27:31) so you can see how far past the time you've gone. You can turn off the daily goal — Focus Sessions now include an "Off" option so you can skip setting a daily goal entirely. New 15-minute snooze option — Alarms now offer a 15-minute snooze interval. Run up to 3 countdowns at once — The Countdown Widget now supports three simultaneous countdowns, up from two. Timer Widget notifications now appear — Fixed an issue where the "timer finished" notification didn't show when the timer was started from the widget. Less clutter in Focus Sessions — Tasks you've already completed no longer show up in the Focus Session task list. More accurate focus progress — Fixed a rounding issue that could show your daily focus progress as a minute short (for example, 49 minutes instead of 50). Smoother World Clock comparisons — The World Clock compare page now loads dates as you scroll, so it feels more responsive. Up-to-date World Clock locations — Refreshed country and city names to match their current names. Correct sun and moon icons during midnight sun — Fixed an icon that wrongly showed a moon during all-day daylight in polar regions. Fixed back-button behavior in clock comparisons — Pressing back once now takes you back as expected, instead of jumping the date to 1926. Corrected the Newfoundland time zone — Newfoundland now uses the right time zone (St. John's). Disabled alarms stay looking disabled — Editing a turned-off alarm no longer makes it appear turned on. Cleaner timer cards — The expand button is now turned off on timer cards that have no time set, preventing actions that wouldn't do anything. Clearer theme setting — Updated the wording to "Choose your preferred app theme." Smoother Settings links — The "About" links in Settings no longer trigger an unexpected "switch apps" prompt. Fixed spacing in Spotify settings — Corrected uneven spacing in the Spotify settings card. Better focus visibility in High Contrast — The focus highlight in World Clock is now clearly visible in the High Contrast Aquatic and Desert themes. No more double announcements — Screen readers no longer read the timer value twice. Countdown names read correctly — Screen readers now properly announce the name of each countdown. Keyboard focus stays put — Focus no longer disappears after you press the Timer Reset button. Clearer alarm toggle for screen readers — Tidied up how the alarm on/off switch is announced. The Media Player app received plenty of changes as well (version 11.2605.14.0): Custom captions — You can now personalize how closed captions appear, with caption styling tied to your Windows caption settings, plus a quick link to open those settings directly. "Indexing" banner in the play queue — When your media library is still being scanned, a banner now explains why some items may not appear yet. Fixed the look of selected items — Corrected a layout glitch with selected items in lists. Fewer playback failures — Improved how the app recognizes supported file types, so more files play without issues. Playlists need a name — You can no longer accidentally save a playlist with a blank name. Cleaner look for empty playlists — Improved how a playlist appears when it has no items yet. More stable play queue edits — Fixed a crash that could happen when changing the play queue while the app was switching between sessions. Clearer "missing codec" message — Improved the dialog that appears when a file needs a codec you don't have, with clearer guidance on what to do. A big update is also available for Paint in version 11.2605.61.0: Adjustable eraser transparency — You can now control how transparent the eraser is. Cleaner stamp brush strokes — Fixed visible color shifts and artifacts when using stamp-style brushes. JPEG photos save in place — Opening a rotated JPEG and pressing Save now overwrites the original instead of unexpectedly prompting "Save As." No more crash on bad image files — Opening a damaged or invalid image, from within the app, by double click, or commandline, now shows a clear error message instead of closing the app. Classic selection behavior restored — The selection outline now hides while you move, resize, or rotate a selection, just like in classic Paint. Tidier AI image panel — Fixed missing spacing at the bottom of the AI image generation panel for a cleaner layout. Visible button hover in light theme — Toolbar split buttons now show a clear hover highlight in the light theme. Snappier toolbar — Streamlined how the ribbon lays out, giving a small speed boost at startup. Fewer background crashes — Fixed a crash that could happen while background tasks were finishing up. Stable app shutdown — Prevented rare crashes when closing the app. Fixed layer removal glitch — Deleting the active layer no longer leaves the layers list in an inconsistent state. Here is what is new in the Photos app (version 2026.11060.2004.0): AI watermarking — AI-generated or edited images can now carry a visible Copilot watermark. You choose Never, Always, or Ask Every Time in Settings, with a confirmation when saving. The watermarking is off by default in settings. Better viewing of small images and pixel art — Tiny images (like 16×16 pixel art) now zoom in far more to fill the screen and stay crisp instead of looking blurry. Select scanned text with the keyboard — When text is detected in an image, you can now navigate and select it using the arrow keys, Shift+Arrow, Home/End, and Ctrl+A, with a clear focus highlight. Fixed a crash in text recognition — Resolved a crash that could close Photos while detecting text in images; the app now recovers gracefully. Easier keyboard navigation — Tabbing through the navigation bar no longer stops on hidden controls, so it takes a single Tab to move past it instead of three. And finally, here is the Sound Recorder (version 11.2605.1.0): Waveform shows with Bluetooth mics — The live waveform now displays correctly when you record using a Bluetooth audio device. No more stray scrollbar — A non-working horizontal scrollbar no longer appears at the bottom of the waveform unless you've zoomed in. Mark button ready right away — The Mark button no longer looks grayed out until you hover over it after opening the app. Markers hidden for WAV files — Markers are now turned off for WAV recordings, since that format can't store them — so they're no longer lost silently. Smoother deleting — Quickly pressing Delete and Enter to remove several recordings in a row no longer triggers a "file doesn't exist" error. Fixed a memory issue — Resolved a memory leak that occurred each time a recording started. You can find all these changelogs in the official documentation here.
  • Recent Achievements

    • Very Popular
      AndrewSteel earned a badge
      Very Popular
    • Veteran
      Taliseian went up a rank
      Veteran
    • One Month Later
      Clizby earned a badge
      One Month Later
    • One Month Later
      Timaximus earned a badge
      One Month Later
    • Week One Done
      Timaximus earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      PsYcHoKiLLa
      170
    3. 3
      +Edouard
      162
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      78
  • Tell a friend

    Love Neowin? Tell a friend!