Recommended Posts

https://www.neowin.net/news/main/07/12/30/n...360-died-on-you

Those of you with (or without) problems please detail.

How many have you had?

How long have you owned your console?

Do you have the original design or the new Falcon 65nm core?

Is it a Core, Arcade, Pro, Elite, Halo, etc?

And please keep this discussion only to the effects of Xbox problems -- 360 vs PS3 vs Wii discussion or any other type of "platform bashing" will not be tolerated!

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/
Share on other sites

I've had 3 360's fail - I'm currently on my 4th 360. Each failure was down to the RROD.

The first one was a launch console that lasted around 6-7 months.

The second one was a refurb which I sold (I later found out that this console too RRODed shortly after selling it - MS replaced it though).

The 3rd Console was bought new (had a 2006 manufacture date) but it died with the RROD about a month after the 12 month warranty expired. Luckily it died shortly after Microsoft?s announcement so I got it replaced with....

Xbox 360 number 4 - was a replacement console from Microsoft, has a mid 2007 manufacture date (so I took it that Microsoft started replacing the dead machines with new ones). So far this machine has been OK:unsure:e:

Each console that died was a core.

Edited by ReAnimation
Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098210
Share on other sites

I have 2 original 360s; both over a year old. One died on my the Friday before Xmas. I have submitted the online "out of warranty" repair for RROD and have yet to receive a response from them. Thankfully I do have a second working 360 but I'm concerned as to how long that will last. Hopefully until I receive my other one back. And hopefully i'll receive the new falcon .

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098215
Share on other sites

How many have you had? 2

How long have you owned your (current) console? 7 + Months

Do you have the original design: Made in 2007

Pro.

I had my first one for about 6 or so months, till my little sister ****ed it up. No RROD yet though, Always keep my xbox clean of dust and it has proper air flow.

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098225
Share on other sites

I have only owned Elite so far...bought it right after it was launched, I think sometime April 2007. Actually in May. :)

Zero freezes, no problems whatsoever. Only couple of networking glitches that I solved by changing my DNS servers.

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098242
Share on other sites

I have two 360 Premium units and both got the RROD after about 10 months. The first replacement is still working ok for about 4 months now. I do find myself doing a good luck dance before powering them on. I'm still waiting to get my second 360 replacement back from MS :(

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098248
Share on other sites

i havent bought mine yet but my cousin's just got the RROD recently. Over a year before he had problems. My buddy has had to get 3 replacements due to faulty cables and things like that. My mom doesnt think I should get one if they have so many problems but I plan on it anyway

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098274
Share on other sites

My launch day console RROD'd after 9 or 10 months (right as they extended the warranty period for the first time, to one year).

It was replaced under warranty, took about 3 days to get the replacement which has worked flawlessly thus far.

I also have a second 360 that I bought around the same time the first one died (for a different room), which sees less use but has also been fine.

I'll soon be selling one of them to replace it with a Falcon-based Elite.

i havent bought mine yet but my cousin's just got the RROD recently. Over a year before he had problems. My buddy has had to get 3 replacements due to faulty cables and things like that. My mom doesnt think I should get one if they have so many problems but I plan on it anyway

Buy a new one (with the "Go Pro" or "Go Big" box, which should be a Falcon model) and you'll have absolutely nothing to worry about.

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098276
Share on other sites

How many have you had?

How long have you owned your console?

Do you have the original design or the new Falcon 65nm core?

Is it a Core, Arcade, Pro, Elite, Halo, etc?

On my second.

My launch console lasted 2 years+.

My new 360 is the Falcon 65nm.

Launch console was a Premium, new 360 is a Pro.

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098305
Share on other sites

I'm on my third Xbox 360.

First machine was a UK launch day Premium and that failed with RROD literally days before the 1 year warranty ran out on it (this was before Microsoft announced the 3 year warranty). Replaced that with another Premium machine which lasted about 7 months before suffering from DVD drive failure and my third is an Elite, which touch wood I haven't had any major problems with yet.

Fortunately (unfortunately?) I work at GAME which means replacements have always been easy to arrange. I've never once had to deal with Microsoft regarding any of my 360s.

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098306
Share on other sites

Yup, I've owned a 360 since mid-2006 and it's died on me with the red ring of death. A week later I was able to use it for about a week, and then it died again. When Halo 3 came out, I got that and put the disc in my 360. I did the update via the disc (because my 360's not online), and then shut down because I was going to eat. I came back to try out Halo 3 for the first time, and I was greeted with a red ring of death.

Of course I thought all those rumors about Halo 3 killing 360's was true because of this, but after a while it just seemed like everyone's was dying anyway. For example, a friend of mine's 360 died just 2 weeks prior. I didn't think it would happen to me, though, but hey I guess I got all the luck. I don't know anyone else with a 360, so that makes it 2 for 2. I didn't try any tricks to get it back to life, I was too ****ed off to do anything about it because it cost so much, and also because I bought Halo 3 on launch.

Anyway... I then bought an Elite because I figured I might as well get one with HDMI and also to get a 360 that was built from the ground up to not have the same kind of heat problems that earlier models had. Then I read on the 'net that the Elites didn't necessarily have the smaller more efficient (and therefore cooler) CPUs that were going to end the RRoD problems once and for all. Screwed again. Speaking of screwed, I also played Halo 3 all the way through on my Elite and well, it wasn't worth going out and buying another system for, that's for sure. It didn't make me any happier or wow me any more than Halo 2 (which I liked, to be fair) that's for sure.

Personally I blame these problems on an early launch. MS really rushed to get the 360 out early, because this was their big plan to get a jump on Sony and Nintendo. I guess it worked out badly because by rushing the system, they didn't allow themselves enough time to test their designs out under duress, and they didn't get the kinks all out of their design.

My PS3 is still working, nobody I know of has any problems with that. My Wii's working fine too, that thing is probably as solid as a brick. (Yeah, I have all the systems, don't want to miss any exclusives.) Next time, make sure you do the job right MS! Yeah I spend more than I should on video games (but at least I don't spend any on PCs or upgrades, I just have one box for browsing), but I ain't made out of money!

Speaking of which, does anyone think that MS would still accept returns for old RRoD 360's? I figured I might as well at least get mine fixed and sell it off to make back some of that money I spent on the Elite... I didn't do it in the first place just because I didn't want to have the same problem again with a system that broke in the first place, and also because I wanted to try Halo 3 finally and didn't really want to wait.

Link to comment
https://www.neowin.net/forum/topic/610191-360-rrod-poll/#findComment-589098307
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
    • Legit concern or publicity stunt considering this is the first time I'm hearing the name?
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!