Recommended Posts

so..is it true that your pecker gets bigger with losing weight? because if so im going to gain a ton of weight,and lose it repeatedly.

 

It is, to some extent: you lose fat around the pelvis (or whatever it's called) and your becomes more noticeable since a part of it is lost in a cavity between mounds of fat.

  • 2 months later...

This is kind of a late post, but back in February (of this year) I weighed in Exactly the same as I did in February 2013

 

I must really have my routine / weight finally tuned. On Friday's I usually walk down town and have 2 Chinese egg rolls (only thing I eat all night) then some vodka diet cokes .. at least 6 of those and then some beer. In the morning I usually weigh less than when I left. No more than 168.0 usually 167.7 Maybe 166.8. So Last Friday my sister came up and we were going to go bar hopping. We ended up going out to her friends house in which we were then suppose to go to a bonfire. Well we ended up just ordering Pizza (which I never do on a Friday) and eating it. It wasn't very exciting.

 

On Saturday I weighed in at 171.4 which is the most i've weighed in 1 year.

 

1 hour ago I was down to 166.8. Here has been my diet since Saturday. Saturday I had my daily morning mocha and at 2pm I had 2 ham sandwiches each with 1 slice of ham, 1 slice of cheese pile of lettuce on 2 slices of 9.5 grams of carbs per slice bread. Then I walked down town (3.6 miles there and back )and had a few vodka diet cokes and 1 beer. (normally I never go bar hopping on Saturday, just Friday, but because I couldn't do it Friday I made up for it on Saturday) Then when I got home I had I had some sun flower seeds as a snack. While I watched Field of Deams in my in home Movie Theater :D

Sunday I had my mocha, some M&M's 2 LARGE slices of ham (soo good) some chocolate eggs, and when I got home I had a large plate of nacho's.

Today I had my morning mocha, at 2:30pm I had 2 ham sandwiches. Then at 8pm I had another large plate of nacho's. Apart from my morning mocha I probably won't eat again until 12pm tomorrow or a little after.

I pretty much have 2 ham sandwiches EVERY day for lunch. Someone once asked me, how I can eat the same thing every day. It's simple!

1) It's quick to make
2) It's low carb (19grams per sandwich)
3) It's filling
4) I'ts soooooooooooooooooooooooo Good!!!!!!

My guess is tomorrow morning i'm going to wake up weighing 167.8

  • 2 weeks later...

Nice work WW. I've started walking 10k steps a day (when I can) and have lost 9lbs since January... I just need to keep on it, which is hard with the wet British weather. I've also cut down on the amount of sugar I eat. I started off at 189lbs btw.

i guess you are :D

 

dont like cooking?

 

It's not that I don't like to  cook, but I figure since I started my computer repair business full time in 2003 (Now at 2,070 customers), because it's out of my house, and my home number is advertised in 2 papers, and a good chunk of people have my cell number, i've pretty much been on call every day for the last 11 years.

 

Sometimes I get calls between the hours of 7pm -10:30pm weekdays  ....Sunday morning calls, Sunday nights at 10:30,  saturday calls. Had one guy after i helped setup his windows 8 machine, called me every Sunday at 7:45am at least 4 weeks in a row for a total of about 14 different calls regarding windows 8. Lets just say he got classic shell.

 

So when I wake up in the morning and if nobody has called yet, I pretty much make a run to my espresso machine to make my morning (what I like to call) a mocha, so I can at least sit down watch some of my favorite TV shows and at a very least drink my mocha in peace.

 

Same goes for lunch, so you can see why I favor food which takes about 3 mins to make 2 sandwiches.

It's not that I don't like to  cook, but I figure since I started my computer repair business full time in 2003 (Now at 2,070 customers), because it's out of my house, and my home number is advertised in 2 papers, and a good chunk of people have my cell number, i've pretty much been on call every day for the last 11 years.

 

Sometimes I get calls between the hours of 7pm -10:30pm weekdays  ....Sunday morning calls, Sunday nights at 10:30,  saturday calls. Had one guy after i helped setup his windows 8 machine, called me every Sunday at 7:45am at least 4 weeks in a row for a total of about 14 different calls regarding windows 8. Lets just say he got classic shell.

 

So when I wake up in the morning and if nobody has called yet, I pretty much make a run to my espresso machine to make my morning (what I like to call) a mocha, so I can at least sit down watch some of my favorite TV shows and at a very least drink my mocha in peace.

 

Same goes for lunch, so you can see why I favor food which takes about 3 mins to make 2 sandwiches.

 

with your busy schedule and stressful work/life its kinda obvious that you should reserve time for yourself. cooking would suit you very well :D its relaxing and selfmade food has way more substance than (US-)bread hehe (and more tea, less coffee) 

 

apart from that congratulations to your successful business :-) !!

with your busy schedule and stressful work/life its kinda obvious that you should reserve time for yourself. cooking would suit you very well :D its relaxing and selfmade food has way more substance than (US-)bread hehe (and more tea, less coffee) 

 

apart from that congratulations to your successful business :-) !!

 

Thanks! Currently at Invoice Number 6,531.

 

It is relaxing to cook. If I was a normal human and had actual true days off. I mean there are days when nobody calls, but there are also days when 15 people call.  Just recently I had  9 separate repairs in 1 day

Thanks! Currently at Invoice Number 6,531.

 

It is relaxing to cook. If I was a normal human and had actual true days off. I mean there are days when nobody calls, but there are also days when 15 people call.  Just recently I had  9 separate repairs in 1 day

 

well you are a normal human :-) , the circumstances we live in are self inflicted. its up to everyone to decide how much he wants to push his body/mind for work. if its doing well for you, good thing, but i tend to think in the long term. 10 yrs, 20 yrs, etc. and i chose to live what i find adequate for all the years that are in front of me :-) you can never take back time afterwards and the body is like a bitchy elephant, it just never forgets.

 

yeh i guess you had many customers because of windows 8. what a pain in the ass for ppl who dont know computers well.

  • 1 month later...

I would just like to announce that I created a new word. Before I tell you the word (which i'm sure you can already see in HUGE letters below :laugh:) I'll tell you were it came from. So I also helped my female friend loose 50 - 55lbs. She went from 255 in November 2013 to her current weight 201 as of today. She pretty much started going on a diet the moment she started talking to me. She called me inspiration.

 

Anyway when ever her and I see a heavy set person we use my new word. We say, I think that person needs a ...

 

Carbvention

 

I asked her if I could share with you guys a before and after photo. She said yes, so here you go.

 

10277351_10152035890842251_2028905400877

 

I also helped and guided this one too. She started on her own but then consulted me on food and stuff. So I called her and we talked on the phone about weight loss for about an hour.

 

1922372_309905275801478_1766277775_n.jpg

 

Now i'm bored. I need a new student!

  • Like 1
  • 2 months later...

is that a thing now?  :huh:  

 

anyway...pretty impressive before/after...  (Y)

 

christie-obama.jpg

 

:blush:

 

Thanks!

 

I've  been helping her since November. In November she was 250 / 260 now she's 193.I've been helping motivate her and giving her pointers. Also let her borrow my famous exercise bike!

  • Like 1
  • 2 weeks later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • To give context to everybody, I bought about 2 sets of RAM, ddr4, 3200, 64 gb, 2 years ago. It costed me 150 usd for each set. If you buy RAM now you only incentivate companies to sell you expensive stuff, as Nvidia did.
    • KillerPDF 1.4.2 by Razvan Serea KillerPDF is a lightweight, portable PDF editor for Windows built for users who want full control without subscriptions, installers, or telemetry. It runs as a single executable, making it ideal for USB use and field work. You can view PDFs with smooth PDFium rendering, navigate quickly with thumbnails, zoom, and shortcuts, and reorganize pages using drag-and-drop. It supports merging multiple PDFs, splitting documents, and extracting selected pages. KillerPDF also allows inline text editing with font matching to preserve the original layout, plus annotations like text boxes, freehand drawing, highlights, and reusable signatures. You can search full text, copy content easily, and print documents with flattened annotations. Designed as a free and open alternative to bloated PDF tools, it works fully offline on Windows 10/11 x64. No runtimes install. Everything needed is inside the EXE (targets .NET Framework 4.8, which ships with every supported Windows release). KillerPDF key features: High-quality PDF rendering via PDFium Edit PDF text inline (double-click to modify text) Page thumbnails and fast navigation with zoom and shortcuts Merge multiple PDFs into one Split PDFs and extract selected pages Drag-and-drop page reordering Font matching to preserve original document appearance Text boxes for notes Freehand drawing tools Highlight overlays with adjustable color, size, opacity Undo actions and clear per-page annotations Create, draw, and save reusable signatures Click-to-place signatures anywhere Full-text search with highlighted results Drag-select or Ctrl+A to copy text Print with annotations flattened Portable single-file app (~10 MB) No installer, no admin rights required No account, no telemetry KillerPDF 1.4.2 changelog: What's new PDF form filling. Interactive PDF forms now render their fields (text inputs, checkboxes, radio buttons) as live controls. Fill them in directly and save — field values are written back into the PDF. PDF outline (bookmark) navigation. A new OUTLINES tab in the sidebar displays the document's bookmark tree. Click any entry to jump to that page. The sidebar auto-fits its width to the longest entry on open and can be dragged wider; switching back to PAGES snaps to the pages-mode width. Fixed Page rotation no longer reverts after saving. Rotations applied via the sidebar context menu now persist correctly through the save pipeline. Copied text words were out of order on PDFs where glyphs are stored in non-reading order (Issue #66). Text extraction now sorts words by position and uses a dynamic line-grouping threshold so both drag-select and Select All produce correctly ordered output. PDFs with malformed or non-standard XRef tables now open in read-only mode instead of showing "Invalid entry in XRef table" and failing entirely. Download: KillerPDF 1.4.2 | 6.1 MB (Open Source) Link: KillerPDF Home Page | Github | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • "...a low price of just $340..." I don't think it means what you think it means.
    • This Corsair Vengeance DDR5-6000 32GB RAM with RGB is a great deal for limited time by Sayan Sen Memory prices have been through the roof for a while, though it seems like things might finally be getting better. If you are in the market for one, then grab this Corsair Vengeance DDR5 32GB (2x16GB) DDR5 6000 CL36 kit with RGB for a low price of just $340 (purchase link under the specs table down below). The kit is compatible with both AMD and Intel systems as it supports both EXPO and XMP overclocking profiles, respectively. 6000 MT/s is often the sweet spot for many systems as it provides ample data transfer speed while still being on Gear 1 mode. This Vengeance variant has RGB so if you love bright setups with such lighting, this is a win-win for you. The technical specifications of the Corsair Vengeance memory kit are given in the table below: Specification Value Memory Type DDR5 Memory Size (Total) 32GB Kit Configuration 2 × 16GB Form Factor UDIMM (Desktop) Pin Count 288-pin Speed (Data Rate) 6000 MT/s Speed Rating PC5-48000 Tested CAS Latency 38-44-44-96 Voltage (Tested) 1.35V Performance Profile AMD EXPO & Intel XMP Heat Spreader Aluminum heatspreader Cooling Type Passive (Heatsink) Lighting Ten Zone RGB Software Support Corsair iCUE Get it at the link below: CORSAIR Vengeance RGB DDR5 32GB (2 x 16GB) 6000 CL38 – Gray (CMH32GX5M1E6000Z38): $339.99 (Sold and Shipped by Woot US, Fulfilled by Amazon US) This Woot deal is US-specific and not available in other regions unless specified. This is a first-party seller link (at the time of article publishing); ensure that you also purchase from a first-party seller link only. If you don't like it or want to look at more options, check out the previous deals that we have covered, OR you can also visit Amazon US deals page. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • The very fact that a TPM (v2.0 specifically which is part of the issue I suspect) is now a baseline for any supported Windows installation will naturally mean other vendors will start to leverage it as they know it'll be there. It's called progress, and it's always been the way. A TPM isn't a windows thing, it's just a module designed to securely store keys. Secure boot isn't a Windows thing (although MS are the TCA as I recall hence the upheaval this year as the 2011 certs expire), it's just a way to verify a bootloader is signed. Windows simply leverages them.
  • Recent Achievements

    • Proficient
      Eric Biran went up a rank
      Proficient
    • Dedicated
      Conjor earned a badge
      Dedicated
    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      244
    3. 3
      Steven P.
      72
    4. 4
      +Edouard
      66
    5. 5
      Skyfrog
      65
  • Tell a friend

    Love Neowin? Tell a friend!