Recommended Posts

Surprised no one mentioned that the CyberTruck was "released" today.

From the first page of this thread w/ current numbers from Tesla....

 

Quote

Availability: 2021, 2022 (2024, 2025)

 

1 motor 2WD:  $39,900   ($60,990)
(250+mile range, est 7,500 lb tow) - "Available in 2025"

2 motor AWD: $49,900  ($79,990)
(300+ mile range, 10,000 lb tow) - 340mi range, 11,000 lbs tow

3 motor AWD: $69,900  ($99,990)
(500+ mile range, 14,000 lb tow)  - 320 mile range, 11,000 lbs tow

That price yo.  Also...CT be ugly.


 

Quote

After a 2-year delay, deliveries of Tesla's Cybertruck are scheduled to start Thursday

Tesla plans to begin deliveries of its Cybertruck on Thursday, marking the electric automaker's long-awaited entry into the pickup market.

It's been four years since CEO Elon Musk first revealed the Cybertruck's polarizing, polygonal design and two years since Tesla failed to meet its initial delivery target.

Now, the company says a handful of buyers will get to drive away with the first few trucks at an event in Austin, Texas, set for 3 p.m. ET.

Hundreds of thousands of people have placed $100 refundable deposits on the pickups, the company says, but it's anyone's guess how many of those deposits will translate into real sales — or how many trucks Tesla has actually produced.

//

 

NPR

On 30/11/2023 at 23:03, Jim K said:

Surprised no one mentioned that the CyberTruck was "released" today.

From the first page of this thread w/ current numbers from Tesla....

 

That price yo.  Also...CT be ugly.


 

NPR

Initially he wanted to sue CyberTruck owners for $50k if they sold the vehicle in less than a year.
https://arstechnica.com/tech-policy/2023/11/tesla-deletes-clause-threatening-to-sue-buyers-who-quickly-resell-cybertruck/

On 01/12/2023 at 00:22, primortal said:

Initially he wanted to sue CyberTruck owners for $50k if they sold the vehicle in less than a year.
https://arstechnica.com/tech-policy/2023/11/tesla-deletes-clause-threatening-to-sue-buyers-who-quickly-resell-cybertruck/

 

That was to prevent people flipping\scalping them, ordering several and selling them at above the posted price. 

It's rather common with very popular concert tickets (see Taylor Swift) and popular cars, and extremely frustrating to perspective buyers. Congress has taken up an investigation to the problem with concert tickets, and they should also do it with other products.

Edited by DocM
  • Like 2
On 01/12/2023 at 01:30, DocM said:

 

That was to prevent people flipping\scalping them, ordering several and selling them at above the posted price. 

It's rather common with very popular concert tickets (see Taylor Swift) and popular cars, and extremely frustrating to perspective buyers. Congress has taken up an investigation to the problem with concert tickets, and they should also do it with other products.

 Musk has an inflated perception of how special this is. It’s not like it’s a Ford GT and it’s not the only ev truck on the market.

People also purchase vehicles and sell them when they find out they don’t like them or their needs change. 

On 01/12/2023 at 03:30, DocM said:

That was to prevent people flipping\scalping them, ordering several and selling them at above the posted price. 

Why is it a concern that people wanted to re-sell the car?  What I purchased it and really hated it; I'm stuck with it for a year because Musk wanted a cut of my re-sale?

Thankfully the backlash forced him to remove those terms.

 

On 01/12/2023 at 03:30, DocM said:

It's rather common with very popular concert tickets (see Taylor Swift) and popular cars, and extremely frustrating to perspective buyers. Congress has taken up an investigation to the problem with concert tickets, and they should also do it with other products.

Congress isn't going after scalpers.  Congress is going after the monopoly the ticket industry created and the amount of fees they charge for purchasing tickets.

On 01/12/2023 at 07:55, primortal said:

Why is it a concern that people wanted to re-sell the car?  What I purchased it and really hated it; I'm stuck with it for a year because Musk wanted a cut of my re-sale?

Thankfully the backlash forced him to remove those terms.

 

Congress isn't going after scalpers.  Congress is going after the monopoly the ticket industry created and the amount of fees they charge for purchasing tickets.

I thought Congress was going after a couple of things.  First, going after all the "hidden" fees that get tacked onto things like concert tickets and hotel rooms.  When you buy a $100 concert ticket and the final price turns out to be $175, it's pretty lame.  Granted nothing is going to get fixed and it'll just become a $175 ticket up front.
And I thought they wanted to take a tax cut when people profiteer on things like concert tickets.  If you sell a $100 Taylor Swift ticket for $4000, they want a cut of those profits.

The govt should just p*ss off and let people do what they want.  If people can make a profit on reselling something, good for them.  The manufacturer didn't meet supply and demand, so it's their loss.  And the govt has no right to tack on yet another greedy tax.

On 01/12/2023 at 09:17, Astra.Xtreme said:

And I thought they wanted to take a tax cut when people profiteer on things like concert tickets.  If you sell a $100 Taylor Swift ticket for $4000, they want a cut of those profits.

Yep, https://www.investopedia.com/do-you-have-to-pay-taxes-for-reselling-concert-tickets-what-you-need-to-know-7975832  but good luck tracking that sale.

  • Like 2
Quote

 

When the Cybertruck was first announced in 2019, Musk said it would have up to 500 miles of range and start at $40,000, both of which were huge promised improvements over any available or forthcoming competitor. Instead, the Cybertruck base model has half that range—250 miles—and starts at $60,990, or $20,000 more than people expected. A 340-mile range version is available for $79,990, which is about 30 percent less range for almost twice the money than expected at preorder time. Customers will have the option to spend an extra $16,000 on a “range extender” that will take up about a third of the truck bed. Anyone willing to spend $100,000 can purchase the “Cyberbeast” trim with about 450 miles of range.

 

 

I think I've figured it out. The low-poly model, the horribly dated 90s era term "cyber", this has got to be it. Elon Musk designed this truck back in his early 20s on his Packard Bell computer, named it the Cyber Truck, and was so proud of it he printed it out, stuck it on his refrigerator and kept it all this time. He bought Tesla for the sole purpose of giving them that printed photo and having them build his dream truck for him.

On 01/12/2023 at 10:40, Rigby said:

I think I've figured it out. The low-poly model, the horribly dated 90s era term "cyber", this has got to be it. Elon Musk designed this truck back in his early 20s on his Packard Bell computer, named it the Cyber Truck, and was so proud of it he printed it out, stuck it on his refrigerator and kept it all this time. He bought Tesla for the sole purpose of giving them that printed photo and having them build his dream truck for him.

I thought this was the background on that. 🤣

image.thumb.png.d47105b78040fc87ce61cb2d94c1bb21.png

On 01/12/2023 at 21:07, Rigby said:

Let me guess: "Real men don't need crumple zones". So not only is it the ugliest vehicle ever made, it appears to be a death trap as well.

Not quite, the crumple is internal as explained further up the thread. The front casting moves, collapsing an internal part which is replaceable. Odds are it will receive another record safety rating like its stablemates. The Model S was so strong it broke the testing machine, and still pulled a 5.0 star rating.

Full review

Prepare yourself for steer by wire, 4 wheel steering, and several other wrinkles.

 

On 02/12/2023 at 15:27, adrynalyne said:

I rather have a vehicle that doesn’t get shot on sight.  

As if someone shooting you won't be aiming for your head through the windows, what is that moron Elon trying to prove?

On 01/12/2023 at 08:55, primortal said:

Why is it a concern that people wanted to re-sell the car?  What I purchased it and really hated it; I'm stuck with it for a year because Musk wanted a cut of my re-sale?

Thankfully the backlash forced him to remove those terms.

Congress isn't going after scalpers.  Congress is going after the monopoly the ticket industry created and the amount of fees they charge for purchasing tickets.

 

 

Ticket scalping is already illegal in 16 states, and counting. A good start, but there should be uniformity and junk fees addressed, which is why congresses going after Ticketmaster. 

Flipping cars happens when demand greatly exceeds production, which is the case with Cybertruck;  production after the startup ramp will be about 250,000 per year which will cause a waiting list of 4-5 years.  Unfortunately, some of the worst perpetrators are car dealers. My first experience with this was when I tried to buy a Datsun 240Z, "Stealers" seriously Jacked the price. Most states have limits on how many used cars you can flip in a year without having a dealer's license, but in some states that level is too high and no one has addressed the Stealers.

IMO, the Feds should address all of this under the Commerce Clause.

On 02/12/2023 at 16:10, PmRd said:

As if someone shooting you won't be aiming for your head through the windows, what is that moron Elon trying to prove?

 

It's not as if they intentionally set out to make the car bulletproof, it just turned out that way. Now they're using it as a cool stuff ad.

Cybertruck is made using a custom cold rolled stainless steel also used for the SpaceX Starship and Super Heavy booster. This was developed by a shared materials sience department led by Apple's former material science guy. 

It's manufactured by a US Outokumpu (Finland) factory, and is 3 mm thick. No soda can metal like on most cars.

During Starships first flight it went off course so the flight termination system fired explosives, but it didn't work - it kept flying. The vehicle was too tough, wuth ridiculous structural margins, so they had to add more explosives for later flights. 

Edited by DocM
On 02/12/2023 at 16:09, DocM said:

 

It's not as if they intentionally set out to make the car bulletproof, it just turned out that way. Now they're using it as a cool stuff ad.

Cybertruck is made using a custom cold rolled stainless steel also used for the SpaceX Starship and Super Heavy booster. This was developed by a shared materials sience department led by Apple's former material science guy. 

It's manufactured by a US Outokumpu (Finland) factory, and is 3 mm thick. No soda can metal like on most cars.

During Starships first flight it went off course so the flight termination system fired explosives, but it didn't work - it kept flying. The vehicle was too tough, wuth ridiculous structural margins, so they had to add more explosives for later flights. 

Thats a load of crap. You don't accidently make something bullet proof. People don't go around shooting cars as part of their testing process unless it was intentionally bullet proof.

On 02/12/2023 at 22:02, adrynalyne said:

Thats a load of crap. You don't accidently make something bullet proof. People don't go around shooting cars as part of their testing process unless it was intentionally bullet proof.

Did you miss the part where the alloy was developed for Starship first? I sincerely doubt that part of its CONOPS had anything to do with bullets. 

They were already buying this custom stainless steel in high volume, so they also used it for the Cybertruck. Largely because they wanted the skin to be structural, an exoskeleton which would allow them to eliminate several parts including the door crash beams. They're credo is 'the best part is no part.'

It may be seen again in future vehicles.

On 02/12/2023 at 22:33, DocM said:

Did you miss the part where the alloy was developed for Starship first? I sincerely doubt that part of its CONOPS had anything to do with bullets. 

They were already buying this custom stainless steel in high volume, so they also used it for the Cybertruck. Largely because they wanted the skin to be structural, an exoskeleton which would allow them to eliminate several parts including the door crash beams. They're credo is 'the best part is no part.'

It may be seen again in future vehicles.

Did you miss the part of it being a load of crap? It doesn't matter what it was developed for initially, you don't go shooting up a vehicle unless you know  it is bullet proof. They chose the material and  there is nothing accidental about it. Note, I am not faulting them on this, or saying they are full of crap. I am saying you assertion that it wasn't intentional is a load of crap.

Edited by adrynalyne
  • Like 2
  • Thanks 1
On 02/12/2023 at 18:09, DocM said:

Cybertruck is made using a custom cold rolled stainless steel

So this is Musk’s Delorean?  Does it come with a Flux Capacitor or is that extra?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Windows 11 is a big thumbs down from me. I used for a period of a few days while it was in insider and windows 10 was the main OS, and realised it wasn't for me. I am still waiting for Windows to be tolerable again, a shame as at one point I was very pro Microsoft.  
    • Classic outlook, not only does it have a much fuller feature set, it doesn't include Microsoft attempting to sync my emails from my servers to theirs. If classic outlook is ever removed from office, and the version I paid for in 2021 stops working for some reason, I'll use Thunderbird.
    • Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • People in the '50s and '60s had the same attitude, and we're still here over a half century later.
  • Recent Achievements

    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      479
    2. 2
      PsYcHoKiLLa
      250
    3. 3
      Steven P.
      74
    4. 4
      FloatingFatMan
      69
    5. 5
      +Edouard
      69
  • Tell a friend

    Love Neowin? Tell a friend!