Recommended Posts

On 03/12/2023 at 02:08, adrynalyne said:

, you don't go shooting up a vehicle unless you know  it is bullet proof. 

They gained that knowledge when somebody decided to shoot a 9 mm at a piece of Starship steel.

Putting a piece of metal behind a target is a thing, the Starships are built in Texas, and one of the properties they purchased at Boca Chica (AKA Starbase) was Massey's gun range, but above all the metal has the properties they needed to make Cybertruck capable of off-roading. 

On 03/12/2023 at 22:18, DocM said:

They gained that knowledge when somebody decided to shoot a 9 mm at a piece of Starship steel.

Putting a piece of metal behind a target is a thing, the Starships are built in Texas, and one of the properties they purchased at Boca Chica (AKA Starbase) was Massey's gun range, but above all the metal has the properties they needed to make Cybertruck capable of off-roading. 

You have proven my point. 

On 04/12/2023 at 01:24, adrynalyne said:

You have proven my point. 

Only from your point of view. The choice of the strongest stainless steel was for safety reasons, it's what they do. When the model S was made and tested for roof crush do you think they intentionally made it to break the machine (which it did)? 

Earlier I mentioned the IDRA (Italy) Giga Press for casting frame halves.

Recently Ford, Hyundai, and Toyota have announced that they are pursuing this technology.

Giga Press is currently in use on Model Y and Cybertruck for front and rear frame segments, 6000 and 9000 metric ton clamping force machines respectively. Their next generation of vehicles will use a 12,000 metric ton unit to cast a frame in a single piece.

The battery is structural and goes between frame halves or becomes the floor of a single piece frame. 

This video is a little dated, but better than most...

Model Y casting halves with a structural battery

tesla_model_y_structural_battery_0.thumb.jpg.dcab064c6d74b7287ef80e962cc68a27.jpg

On 04/12/2023 at 01:01, DocM said:

Only from your point of view. The choice of the strongest stainless steel was for safety reasons, it's what they do. When the model S was made and tested for roof crush do you think they intentionally made it to break the machine (which it did)? 

Earlier I mentioned the IDRA (Italy) Giga Press for casting frame halves.

Recently Ford, Hyundai, and Toyota have announced that they are pursuing this technology.

Giga Press is currently in use on Model Y and Cybertruck for front and rear frame segments, 6000 and 9000 metric ton clamping force machines respectively. Their next generation of vehicles will use a 12,000 metric ton unit to cast a frame in a single piece.

The battery is structural and goes between frame halves or becomes the floor of a single piece frame. 

This video is a little dated, but better than most...

Model Y casting halves with a structural battery

tesla_model_y_structural_battery_0.thumb.jpg.dcab064c6d74b7287ef80e962cc68a27.jpg

It’s the only point I have been discussing from, so yeah. 

On 02/12/2023 at 19:02, adrynalyne said:

Thats a load of crap. You don't accidently make something bullet proof. People don't go around shooting cars as part of their testing process unless it was intentionally bullet proof.

No, it's absolutely true.

They literally stated this.  It's not completely bulletproof, but its an unintended property of the metal that was designed.

It's just where people's minds go when they see a huge metal car.  They're used to plastic honda's, not tanks.  So as such, the question is always raised.  

It sounds to me like they over-engineered the chassis and maybe should have looked at ways to reduce the cost by using a different material.  Using stainless steel designed for a rocket is pretty overkill, and having the production price being almost twice the initial estimate doesn't look good.
They're late to the game and the entry price is $10,000 above the F-150 Lightning.

It's too expensive and stands out too much.  Every kid in the neighborhood is going to perform flying karate kicks on it to "test" its strength.

On 04/12/2023 at 08:44, mram said:

No, it's absolutely true.

They literally stated this.  It's not completely bulletproof, but its an unintended property of the metal that was designed.

It's just where people's minds go when they see a huge metal car.  They're used to plastic honda's, not tanks.  So as such, the question is always raised.  

No, its not, regardless of what they stated.

They chose the material KNOWING it was bullet proof then used that "feature" to market it further. Which is fine, but come on, that was not unintended. Unintended is when you smash an "un-smashable" window during a demonstration.

 

From the head on crash test, I think I would feel more alive afterwards in that plastic Honda.

Edited by adrynalyne
On 04/12/2023 at 08:49, adrynalyne said:

No, its not, regardless of what they stated.

They chose the material KNOWING it was bullet proof then used that "feature" to market it further.

They didn't choose the material, they designed it.  it wasn't like a color wheel at Home Depot.  It's a structural support exoskeleton frame that was created, something not done typically with consumer vehicles.

It is incidental that it has other properties.  It has to be strong for its designed purpose.  It might be strong enough for other purposes.  This is for funsies.  That's kind of what Tesla has been known for.

First 45 seconds from the Tesla engineer: "Obviously we didn't design it to be bulletproof, but if it works out..."

Lets see what it is like in the real world, not the favorable paces that all car companies showcase. Personally, I still think it is fugly.

I would not want to test how well it takes a shot in the real world.

On 04/12/2023 at 10:44, mram said:

No, it's absolutely true.

They literally stated this.  It's not completely bulletproof, but its an unintended property of the metal that was designed.

It's just where people's minds go when they see a huge metal car.  They're used to plastic honda's, not tanks.  So as such, the question is always raised.  

Not to mention people who try to shoot up junkers, law enforcement agencies who test tactical ammunition against vehicles to see if they'll go through the bodies and window glass (often the answer is no - laminated glass is very tough), etc. 

Sometimes manufacturers will put vehicles through torture testing which includes guns, Tesla has a orders for Cybertruck from police agencies, including Latin America. Even corporate security is looking at it, one example being Oracle.

Edited by DocM
On 04/12/2023 at 22:29, DocM said:

Not to mention people who try to shoot up junkers, law enforcement agencies who test tactical ammunition against vehicles to see if they'll go through the bodies and window glass (often the answer is no - laminated glass is very tough), etc. 

Sometimes manufacturers will put vehicles through torture testing which includes guns, Tesla has a orders for Cybertruck from police agencies, including Latin America. Even corporate security is looking at it, one example being Oracle.

Looking forward to when NHTSA adds "shooting vehicles" that part of their safety testing. /s

On 05/12/2023 at 08:16, Warwagon said:

People either HATE  the Cybertruck or LOVE the Cybertruck. I'm on the LOVE side. If I was rich i'd buy one!

It's meh. Would rather have an F150 Lightning or Rivian if I was in the market for an EV truck..

On 05/12/2023 at 08:47, primortal said:

Looking forward to when NHTSA adds "shooting vehicles" that part of their safety testing. /s

Automakers which make police vehicles do destructive testing - often in conjunction with police agencies. Some of the most grueling tests are done by the Michigan State Police.  FBI does a lot of tactical ammunition tests, determining which penetrate laminated glass and other barriers the best.

Top Gear does Cybertruck

 

On 05/12/2023 at 11:00, tsupersonic said:

It's meh. Would rather have an F150 Lightning or Rivian if I was in the market for an EV truck..

I go for the one with a more HIGHEST SPEC 240v utility power/bidirectional charging F-150 Lightning is 9.6 KW, Cybertruck is 11.5 KW. I also like the under the bed tool box, fold down back seats, and steel power tonneau cover. 

On 05/12/2023 at 09:02, DocM said:

Automakers which make police vehicles do destructive testing - often in conjunction with police agencies. Some of the most grueling tests are done by the Michigan State Police.  FBI does a lot of tactical ammunition tests, determining which penetrate laminated glass and other barriers the best.

Top Gear does Cybertruck

 

I'm sure we will see these as police vehicles any day now.

On 05/12/2023 at 12:43, adrynalyne said:

I'm sure we will see these as police vehicles any day now.

 

LEOs have ordered it, and last September Larry Ellison announced Oracle's public safety division has ported their LEO software to Cybertruck. It's already deployed in other Teslas.

On 06/12/2023 at 17:33, DocM said:

There were hints something like this was coming.

 

https://www.rollingstone.com/politics/politics-news/trump-michigan-speech-autoworkers-electric-boat-rant-1234833784/

But trump told us EV's and water combined would get us killed.  This was only a couple months ago too.

 

Are you saying he's wrong?

  • Haha 2
On 07/12/2023 at 10:03, DeathLace said:

https://www.rollingstone.com/politics/politics-news/trump-michigan-speech-autoworkers-electric-boat-rant-1234833784/

But trump told us EV's and water combined would get us killed.  This was only a couple months ago too.

 

Are you saying he's wrong?

I'll take ectrocution over sharks any day

On 12/12/2023 at 11:30, primortal said:

 

Checked around and it sounds like it had a pre-release software version which affected the all-wheel drive. Fixed.

Meanwhile, Ford has cut in half their production of the F-150 Lightning. One factor may be customers made  Lightning orders as a hedge against their Cybertruck order. Other possibilities are  that Cybertruck has a larger bed, and more power from its bi-directional 240vac socket.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Classic outlook, not only does it have a much fuller feature set, it doesn't include Microsoft attempting to sync my emails from my servers to theirs. If classic outlook is ever removed from office, and the version I paid for in 2021 stops working for some reason, I'll use Thunderbird.
    • Kdenlive 26.04.2 by Razvan Serea Kdenlive is an acronym for KDE Non-Linear Video Editor. It works on GNU/Linux, Windows and BSD. Through the MLT framework, Kdenlive integrates many plugin effects for video and sound processing or creation. Furthermore Kdenlive brings a powerful titling tool, a DVD authoring (menus) solution, and can then be used as a complete studio for video creation. Kdenlive supports all of the formats supported by FFmpeg or libav (such as QuickTime, AVI, WMV, MPEG, and Flash Video, among others), and also supports 4:3 and 16:9 aspect ratios for both PAL, NTSC and various HD standards, including HDV and AVCHD. Video can also be exported to DV devices, or written to a DVD with chapters and a simple menu. Video editing features: Multi-track editing with a timeline and supports an unlimited number of video and audio tracks. A built-in title editor and tools to create, move, crop and delete video clips, audio clips, text clips and image clips. Ability to add custom effects and transitions. A wide range of effects and transitions. Audio signal processing capabilities include normalization, phase and pitch shifting, limiting, volume adjustment, reverb and equalization filters as well as others. Visual effects include options for masking, blue-screen, distortions, rotations, colour tools, blurring, obscuring and others. Configurable keyboard shortcuts and interface layouts. Rendering is done using a separate non-blocking process so it can be stopped, paused and restarted. Kdenlive also provides a script called the Kdenlive Builder Wizard (KBW) that compiles the latest developer version of the software and its main dependencies from source, to allow users to try to test new features and report problems on the bug tracker. Project files are stored in XML format. An archiving feature allows exporting a project among all assets into a single folder or compressed archive. Built-in audio mixer Kdenlive 26.04.2 changelog: Remove not needed actions from render info, fix rough size calculation for rendering. Fix clip sometimes not inserted in timeline when moving vertically in bin drag. Fix transcoding from clip properties. Cleanup render profile audio quality. Use percent based value for audio quality, and adjust the range accordingly per codec. Fixes bug #520750 Enforce even numbers for render width/height. Fixes bug #520737 Fix nightly flatpak - disable rnnoise until implemented. Fix missing initialization. Edit mediacapture.cpp. Fix document unnecessarily marked as modified on opening, triggering a backup request. Fix incorrect detection of missing and remote clips causing unwanted backups. Fixes issue #2194 Fix tests. Fix tmp files copied to wrong location when setting project folder. Fixes bug #467740 Fix color clips not selected on creation. Use QFileInfo instead of QUrl/QDir to try fixing Windows shared drives. Fixes bug #451413 Fix timeline preview incorrectly invalidated when a track with effect duration changed. Fixes bug #514541 Fix missing var. Display paths in native format in render widget. Fixes bug #520428 Simple splash: fix pressing return always triggered the same button. Minor update to simple splash. Fix unwanted clips added to timeline and cleanup. Fixes issue #2190 Minor layout improvements to welcome screen, add Quit and Open shortcuts. Fix broken welcome dialog layout in tiling compositors. (craft) Limit the number of CPU cores used during a Windows build with mingw as some .cpp files are memory intensive to build. (kde-ci) Limit the number of CPU cores used during a build as some .cpp files are memory intensive to build. (kde-ci) Cleanup old entries. Another fix for animation crash. Fix uninitialized function - crash on create animation. Another attempt to fix MacOS permissions. MacOS: fix bundle release version. Fix MacOS plist path. Fix MacOS build. Explicitely link against Qt::Core. Download: Kdenlive 26.04.2 | 128.0 MB (Open Source) Download: Standalone Executable View: Kdenlive Home page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Here's how to watch the Xbox Games Showcase today and what to expect by Pulasthi Ariyasinghe The June games showcase week has been a packed one, with everything from major presentations like Sony and Summer Game Fest to indie-focused reveals coming in almost every day. Now, it's almost time for another big one, with Microsoft bringing its Xbox Games Showcase back later today. This is a double feature too, with a Gears of War E-Day deep dive also being attached to it. For anyone wanting to tune in online, the 2026 Xbox Games Showcase is kicking off at 10 AM PT | 1 PM ET | 6 PM BST | 7 PM CEST later today, June 7. The event will be available to watch on the official Xbox YouTube (4K 60FPS), Twitch, Facebook, Steam, Amazon Live, and other portals. Separate livestreams for American Sign Language and Audio Description will also be available. "This year marks 25 years of XBOX, and this Showcase is poised to be a true celebration, offering world premieres, new gameplay, fresh updates, and more for a swathe of projects we cannot wait to share," said Microsoft about this presentation. With a new CEO behind it that is pulling off some interesting moves, Xbox may have some surprises to reveal today. New looks at first-party games like Halo Campaign Evolved from Halo studios, Fable from Playground Games, InXile Entertainment's Clockwork Revolution, Mojang's Minecraft Dungeons II, and Call of Duty: Modern Warfare 4 from Infinity Ward are to be expected here. We may finally get to see the new Blade from Arcane Studios in action and a new Persona game from Atlus at the showcase too. Surprise announcements may also arrive from other Microsoft-owned studios like Bethesda, MachineGames, Ninja Theory, Obsidian, Rare, World's Edge, or Blizzard. Considering how every new release nowadays is staying away from November and December to avoid Grand Theft Auto VI's release, any launch dates Microsoft announces will probably skip those months as well. Once the Xbox Games Showcase ends, Microsoft will immediately kick off the Gears of War: E-Day Direct. This deep dive into the upcoming prequel from The Coalition should attach gameplay footage and perhaps a release window to the highly anticipated project.
    • People in the '50s and '60s had the same attitude, and we're still here over a half century later.
    • So after some fiddling I was able to get it to run at a pretty stable 30FPS. I'm slightly surprised about how much fiddling I had to do to get there though given what I thought was reasonable hardware: Processors: 16 × AMD Ryzen 7 7840HS w/ Radeon 780M Graphics Memory: 16 GiB of RAM Graphics Processor 1: AMD Radeon 780M Graphics Graphics Processor 2: AMD Radeon RX 7700S I think I could do it better if I use Linux rather than Windows, Windows RAM usage is stupid without stripping the system down. But once I got it working in a reasonable state, it was so awesome! I felt like a new Bond! If anyone has any advice to get things going a bit smoother FPS-wise, I'd appreciate it.
  • Recent Achievements

    • Week One Done
      Windows Guy earned a badge
      Week One Done
    • Dedicated
      Mark Spruce earned a badge
      Dedicated
    • Collaborator
      conkir earned a badge
      Collaborator
    • Rising Star
      olavinto went up a rank
      Rising Star
    • One Month Later
      lamborghiniv10 earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      481
    2. 2
      PsYcHoKiLLa
      256
    3. 3
      Steven P.
      74
    4. 4
      +Edouard
      70
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!