-
Posts
-
By FunkyMike · Posted
Useful to know, thanks! -
By TarasBuria · Posted
Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle. -
By +LightEco · Posted
I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min. -
By Nick H. · Posted
<Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age... -
By flexorcist · Posted
ive always been fascinated by old software this is an old video player for windows from apple
-
-
Recent Achievements
-
flexorcist earned a badge
Conversation Starter
-
AndreaB earned a badge
One Month Later
-
agatameier earned a badge
One Month Later
-
agatameier earned a badge
Week One Done
-
ssd21345 earned a badge
Week One Done
-
-
Popular Contributors
-
Tell a friend
.thumb.png.b7089ebbdf00d96b3b92dddbd04bac02.png)
Question
+chorpeac MVC
The Beta has been returning some good comments and suggestion and bugs, and many changes have been made that were recommended.
Jmann and I are pleased to annouce the public preview of the Neowin Graphic Request system. For those of you who are not familiar, the previous graphic request threads worked, but there are many things that the new system does for the process.
Requests will no longer get lost in all the jibber jabber that filled the current threads.
To start, login with your Neowin credentials.
NeoRequest allows someone who is looking for a graphic the chance to submit a request. The request must include certain information to be submitted. Once it is submitted an artist can accept to work on it. The requestor will know who is working on the request. The requestor, artist, or a normal person logging in can post comments/Questions on the request. Once an artist is finished, he/she will submit a URL to a graphic or a zip file containing the graphics.
The artist has the option to track their work and all work completed in the past in the artist workdesk. This is also where the artist submits their finish products for a request. An artist can also edit previously submitted URLs for any reason.
A basic search function is available for a quick search of historical requests.
We hope you enjoy the system, see the benefit of it, and continue to make your graphic requests through it.
Once again, this is a public preview, not a final product. It is almost a final product. The risk of data loss is possible. Also, changes can and are still being made, so please be patient. Access the system to become familiar with it, test it out, or make a live request!
Have fun, if you find errors, have a suggestion, or have a question about it, PM Jmann or chorpeac!
The address to access the system is NeoRequest
Link to comment
https://www.neowin.net/forum/topic/197776-neorequest-public-preview/Share on other sites
353 answers to this question
Recommended Posts