Recommended Posts

So: yeah, you probably installed a third party plug-in that added support for those types, and they registered their appropriate Groups for use in WMP's file associations utilities.

Your right, it was from a plugin I installed. I got a little excited as I didn't expect to see that there.

Even after applying instructions of post above loads of people have some "Version error". There's also a workaround for that, but not any WGA workaround is allowed here, so i think post above will be deleted.

No workarounds or whatever else on neowin please!

Edited by Ambroos

Even after applying instructions of post above loads of people have some "Version error". There's also a workaround for that, but not any WGA workaround is allowed here, so i think post above will be deleted.

No workarounds or whatever else on neowin please!

As I said, there are legitimate non-piracy reasons to not wish to participate in WGA.

Also, if you are getting the error that says "Media player version is 11.x.x.x when 10.0.0.x was expected" you need to completely go into Add/Remote Windows Components and uninstall Windows Media Player, then restart your PC. Once Windows Media Player is completely removed, follow my instructions above and it will work.

That problem happens when you attempt to install over WMP10.

This is happening because that's very much not a valid install scenario. Your system is totally baffled right now.

Xab: Those instructions are awful. If you need to reset the version warning, just run "c:\windows\inf\unregmp2.exe /UpdateWMP". But your system is totally farked anyways using your method (to quote Dan, "He's going to have serious problems").

Can we please keep the thread clear of fake installs? Unless you run through the normal setup exe, your install is not going to be working fully correctly. You may be able to cobble together a half-assed install (and you get an F for the current hack), but it's fundamentally useless as a method for test or evaluation of this non-beta pre-prerelease version of WMP. Even screenshots from "fake" systems are kind of purposeless, since your fundamentally not getting the same experience as an actual install. Which I thought would have been obvious... =\

Well my install is an actual install, i got the error with the DLL during the installation...

No, it's absolutely 100% not a valid install. I've explicitly warned our beta team against installs like yours - happily enough, they're trivial to detect. I could point out three major failures areas you'll hit already without looking further at your system. I'll let you find those - I don't really feel like getting into WMP11 until the beta version hits the streets (and again, this is NOT it). Your system is not remotely valid, and most everybody I know was amazed it was vaguely functional.

Please keep the "WGA Circumvention" installs out of the thread. They're simply not valid and aren't going to work right. :(

@ Xab: Uninstalling and reinstalling WMP as a solution is something I've asked people to get away from for years now. Please don't start that chain up again. I write the installer. It's optimized to better handle reinstalling on top of itself. If you uninstall first, you're going to bypass extra logic I put in there to handle trouble-shooting.

And (ignoring the fact that that install is not the beta install) your system is actually not correct and not valid. Sorry. I know you'll run into problems if you use your hacked version extensively, and all I can say is to actually install the player instead of trying to outsmart it.

Edited by zachdms

i might of missed the question, and possibly the answer, but how do you change the language of WMP11 so i can use URGE and such like

possibly in the simplist way you could put it too please

Edit::

Never mind, figured it out :D

anyway, how do i combine albums and such like

another problem is with changing the album year, i put in 2004 and hit enter and it changes to 2003, then i do the same with 2003 and it comes up as 2002, oh so very confusing

but besides that, its oh so very awesome

Edited by Corris

Actually mate i have no flaws in my system, no flaws in the software i have submitted (Link Supplied for this)

My system is secure and always has been so there is no 3 things i need to look at and to be honest there is no WGA circumvension in this install and if u have DLL errors then its with your system and not mine.

But thanks

**Update** my system is valid and always has been since the software was bought last year but then again you wouldn't know this would you, the software installs without any errors and has been installed straight away after download, the file hasnt been changed by myself, its free from Microsoft no key required and no money changes hands.

Well, I've installed it myself, and I find it's a vast improvement over WMP 10. But I do agree that it does need some cleaning up, for example the vast repition of menus, though there is this one thing that is bothering me, I can no longer drag-and-drop albums to combine them. I miss that from WMP10. :(

Well, I've installed it myself, and I find it's a vast improvement over WMP 10. But I do agree that it does need some cleaning up, for example the vast repition of menus, though there is this one thing that is bothering me, I can no longer drag-and-drop albums to combine them. I miss that from WMP10. :(

Please don't complain over illegaly downloaded software. When the Beta is out you can report comments/bugs.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I agree, especially if it is cloud sourced, like this one is.. but I wouldn't say no to a local AI assistant similar to the Zettlab one which would be really helpful with my large Photos library, but also to perform tasks like installing Docker apps rather than me having to do it via Docker Compose, but I don't think we're quite there yet. Synology Photos is somewhat AI, you can ask it to search for certain people (if you have tagged them and it will attempt to match similar photos to the person) and if you put a search term in for "cars" for example, it will show you all photos with a car.
    • I doubt that Google will keep the same price... it may go up from that list published.
    • Sennheiser's audiophile grade HD 600 hits lowest ever price on Amazon Prime Day 2026 by Sayan Sen If you are in the market for high-quality audiophile-grade over-ear headphones then Sennheiser's HD 600 are a great choice for sure, especially today on Prime Day 2026 as the product has hit its lowest ever price (purchase link under the specs table down below). The Sennheiser HD 600 has long been regarded as a reference headphone for listeners seeking a detailed and natural listening experience. It is an open-back design that is built around the idea of acoustic transparency which is essentially said to allow sound waves to move freely for a more spacious and accurate presentation by reducing turbulence and the type of distortion that can result from it. At the heart of the product is Sennheiser’s proprietary driver system featuring a 42 mm driver paired with a lightweight diaphragm and aluminum voice coils. The company says this design helps deliver fast response times and better articulate sound across the audible frequency range. Comfort and durability are also key aspects of the HD 600 as the headphones feature soft velour ear pads designed for extended listening sessions. The HD 600 comes with a detachable 3-meter cable, a 6.3 mm stereo connector, and a 3.5 mm adapter for compatibility with a wide range of audio equipment. The technical specs of the Sennheiser HD 600 are given in the table below: Specification Value Transducer Principle Dynamic, Open-Back Ear Coupling Circumaural (Over-Ear) Frequency Response 12 Hz – 40,500 Hz Sound Pressure Level (SPL) 97 dB (1 V) Impedance 300 Ω Total Harmonic Distortion (THD) < 0.1% (1 kHz, 1 V) Cable Length 3 m (9.8 ft) Connector 3.5 mm Stereo Jack Plug Included Adapter 6.3 mm (1/4") Stereo Jack Adapter Weight 260 g Magnetic Field Strength 1.8 mT Driver Size 42 mm Dynamic Driver Diaphragm Size 38 mm Get it at the link below: Sennheiser HD 600: $237.00 (Sold by Electronics Expo, Shipped by Amazon US) (Was: $449.95) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases
    • So the card is targeted at headphone users - so the review should be from someone that uses this - maybe I can review a card next time.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      476
    2. 2
      +Edouard
      170
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      88
    5. 5
      Steven P.
      70
  • Tell a friend

    Love Neowin? Tell a friend!