Recommended Posts

So: yeah, you probably installed a third party plug-in that added support for those types, and they registered their appropriate Groups for use in WMP's file associations utilities.

Your right, it was from a plugin I installed. I got a little excited as I didn't expect to see that there.

Even after applying instructions of post above loads of people have some "Version error". There's also a workaround for that, but not any WGA workaround is allowed here, so i think post above will be deleted.

No workarounds or whatever else on neowin please!

Edited by Ambroos

Even after applying instructions of post above loads of people have some "Version error". There's also a workaround for that, but not any WGA workaround is allowed here, so i think post above will be deleted.

No workarounds or whatever else on neowin please!

As I said, there are legitimate non-piracy reasons to not wish to participate in WGA.

Also, if you are getting the error that says "Media player version is 11.x.x.x when 10.0.0.x was expected" you need to completely go into Add/Remote Windows Components and uninstall Windows Media Player, then restart your PC. Once Windows Media Player is completely removed, follow my instructions above and it will work.

That problem happens when you attempt to install over WMP10.

This is happening because that's very much not a valid install scenario. Your system is totally baffled right now.

Xab: Those instructions are awful. If you need to reset the version warning, just run "c:\windows\inf\unregmp2.exe /UpdateWMP". But your system is totally farked anyways using your method (to quote Dan, "He's going to have serious problems").

Can we please keep the thread clear of fake installs? Unless you run through the normal setup exe, your install is not going to be working fully correctly. You may be able to cobble together a half-assed install (and you get an F for the current hack), but it's fundamentally useless as a method for test or evaluation of this non-beta pre-prerelease version of WMP. Even screenshots from "fake" systems are kind of purposeless, since your fundamentally not getting the same experience as an actual install. Which I thought would have been obvious... =\

Well my install is an actual install, i got the error with the DLL during the installation...

No, it's absolutely 100% not a valid install. I've explicitly warned our beta team against installs like yours - happily enough, they're trivial to detect. I could point out three major failures areas you'll hit already without looking further at your system. I'll let you find those - I don't really feel like getting into WMP11 until the beta version hits the streets (and again, this is NOT it). Your system is not remotely valid, and most everybody I know was amazed it was vaguely functional.

Please keep the "WGA Circumvention" installs out of the thread. They're simply not valid and aren't going to work right. :(

@ Xab: Uninstalling and reinstalling WMP as a solution is something I've asked people to get away from for years now. Please don't start that chain up again. I write the installer. It's optimized to better handle reinstalling on top of itself. If you uninstall first, you're going to bypass extra logic I put in there to handle trouble-shooting.

And (ignoring the fact that that install is not the beta install) your system is actually not correct and not valid. Sorry. I know you'll run into problems if you use your hacked version extensively, and all I can say is to actually install the player instead of trying to outsmart it.

Edited by zachdms

i might of missed the question, and possibly the answer, but how do you change the language of WMP11 so i can use URGE and such like

possibly in the simplist way you could put it too please

Edit::

Never mind, figured it out :D

anyway, how do i combine albums and such like

another problem is with changing the album year, i put in 2004 and hit enter and it changes to 2003, then i do the same with 2003 and it comes up as 2002, oh so very confusing

but besides that, its oh so very awesome

Edited by Corris

Actually mate i have no flaws in my system, no flaws in the software i have submitted (Link Supplied for this)

My system is secure and always has been so there is no 3 things i need to look at and to be honest there is no WGA circumvension in this install and if u have DLL errors then its with your system and not mine.

But thanks

**Update** my system is valid and always has been since the software was bought last year but then again you wouldn't know this would you, the software installs without any errors and has been installed straight away after download, the file hasnt been changed by myself, its free from Microsoft no key required and no money changes hands.

Well, I've installed it myself, and I find it's a vast improvement over WMP 10. But I do agree that it does need some cleaning up, for example the vast repition of menus, though there is this one thing that is bothering me, I can no longer drag-and-drop albums to combine them. I miss that from WMP10. :(

Well, I've installed it myself, and I find it's a vast improvement over WMP 10. But I do agree that it does need some cleaning up, for example the vast repition of menus, though there is this one thing that is bothering me, I can no longer drag-and-drop albums to combine them. I miss that from WMP10. :(

Please don't complain over illegaly downloaded software. When the Beta is out you can report comments/bugs.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wow, throwback.  VERY VERY briefly - but realised that it wasn't the language I needed for the tasks I was taking on.
    • Apple and Tesla trade secrets reportedly exposed following a Tata Electronics cyberattack by Hamid Ganji Image via Depositphotos.com Tata Electronics has confirmed that it detected a cybersecurity incident in some of its systems. The Indian company is a manufacturing partner of both Apple and Tesla, and the incident may have exposed some trade secrets belonging to the two American companies. The World Leaks ransomware group is said to be behind the attack, and it has reportedly posted up to 200,000 files on the dark web, including component designs and specification documents related to Apple and Tesla products. Tata Electronics told Reuters that its response protocols were deployed immediately and that the “incident has had no impact on our operations across businesses, which remain unaffected.” The ransomware group reportedly sent a ransom demand to Tata Electronics, while Apple has launched an investigation into the incident. World Leaks claims it stole more than 200,000 files totaling over 630GB from Tata Electronics. Some database files on the ransomware group’s website are titled "com.apple.factorydata," which could refer to Apple’s iPhone production operations in India. Moreover, some documents reportedly contain material specifications and quality inspection standards for iPhone circuit board components. However, Apple is not the only affected company. A folder found in the World Leaks database is titled "NV36 Chargeport Controller - North America," which may refer to Tesla Model Y components. Additionally, other files in the database reportedly contain drawings related to Tesla’s Project Highland, the internal codename for the EV maker’s updated Model 3 sedan. To support the authenticity of the stolen files, World Leaks has published documents containing footers that read: "This document contains proprietary and confidential information of Apple Inc." and "information contained herein is deemed confidential, proprietary, and a trade secret of Tesla Inc." Cybersecurity researcher Rajshekhar Rajaharia told Reuters that the database also contains emails, event logs spanning several years, and passport copies of employees, including foreign nationals. Both Tesla and Apple have declined to comment on the scale of the incident.
    • Last time I used Pascal was in college about 40 yrs ago, programmed an inventory database for my exam.
    • If they don't sell enough of the 1st gen then there won't be a 2nd gen
    • Epic fail, should've added an eSata port on the back, also if the memory/NVME are soldered then they're hardly gonna sell any, first thing most people do with their Steamdeck is, or used to be, replacing the NVME with a 2TB one. At that price they should, possibly for the first time, offer an installments option, say 24 months, they may sell a lot if they do. I'm sure they would have no shortage of credit companies willing to partner.
  • Recent Achievements

    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
    • Dedicated
      tuben earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      +Edouard
      204
    3. 3
      PsYcHoKiLLa
      95
    4. 4
      Michael Scrip
      91
    5. 5
      neufuse
      71
  • Tell a friend

    Love Neowin? Tell a friend!